From: Rajendra Nayak <rnayak@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, sboyd@codeaurora.org,
dianders@chromium.org, mka@chromium.org, kgodara@codeaurora.org,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH 2/4] arm64: dts: qcom: sc7280-crd: Add device tree files for CRD
Date: Tue, 23 Nov 2021 12:30:11 +0530 [thread overview]
Message-ID: <1637650813-16654-3-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1637650813-16654-1-git-send-email-rnayak@codeaurora.org>
CRD (Compute Reference Design) is a sc7280 based board, largely
derived from the existing IDP board design with some key deltas
1. has EC and H1 over SPI similar to IDP2
2. touchscreen and trackpad support
3. eDP display
We just add the barebones dts file here, subsequent patches will
add support for EC/H1 and other components.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sc7280-crd.dts | 31 +++++++++++++++++++++++++++++++
2 files changed, 32 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-crd.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6b816eb..b18708c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
new file mode 100644
index 0000000..09d02c2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 CRD board device tree source
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sc7280-idp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. sc7280 CRD platform";
+ compatible = "qcom,sc7280-crd", "google,hoglin-rev0", "qcom,sc7280";
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&nvme_pwren {
+ pins = "gpio51";
+};
+
+&nvme_3v3_regulator {
+ gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2021-11-23 7:00 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-23 7:00 [PATCH 0/4] arm64: dts: qcom: Add support for the sc7280 CRD board Rajendra Nayak
2021-11-23 7:00 ` [PATCH 1/4] dt-bindings: arm: qcom: Document qcom,sc7280-crd board Rajendra Nayak
2021-11-23 14:53 ` Matthias Kaehlcke
2021-11-24 11:47 ` Rajendra Nayak
2021-11-23 7:00 ` Rajendra Nayak [this message]
2021-11-23 16:14 ` [PATCH 2/4] arm64: dts: qcom: sc7280-crd: Add device tree files for CRD Matthias Kaehlcke
2021-11-24 11:48 ` Rajendra Nayak
2021-11-23 7:00 ` [PATCH 3/4] arm64: dts: qcom: sc7280: Define EC and H1 nodes Rajendra Nayak
2021-11-23 17:40 ` Matthias Kaehlcke
2021-11-24 11:48 ` Rajendra Nayak
2021-11-23 7:00 ` [PATCH 4/4] arm64: dts: qcom: sc7280-crd: Add Touchscreen and touchpad support Rajendra Nayak
2021-11-23 17:58 ` Matthias Kaehlcke
2021-11-24 11:49 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1637650813-16654-3-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=kgodara@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).