From: Cliff White <cliffw@osdl.org>
To: Grant Grundler <grundler@parisc-linux.org>
Cc: Andi Kleen <ak@suse.de>,
davem@redhat.com, alan@lxorguk.ukuu.org.uk,
James.Bottomley@SteelEye.com, axboe@suse.de, suparna@in.ibm.com,
linux-kernel@vger.kernel.org, alex_williamson@hp.com,
bjorn_helgaas@hp.com, cliffw@osdl.org
Subject: Re: [RFC] block layer support for DMA IOMMU bypass mode II
Date: Fri, 01 Aug 2003 14:51:49 -0700 [thread overview]
Message-ID: <200308012151.h71LpnR05998@mail.osdl.org> (raw)
In-Reply-To: Message from Grant Grundler <grundler@parisc-linux.org> of "Tue, 29 Jul 2003 20:31:47 MDT." <20030730023147.GA31757@dsl2.external.hp.com>
> On Mon, Jul 28, 2003 at 01:15:13PM +0200, Andi Kleen wrote:
> > Run it with 100-500 users (reaim -f workfile... -s 100 -e 500 -i 100)
> > I tested with ext3 on a single SCSI disk.
>
> andi, davem, jens,
> sorry for the long delay. Here's the data for ZX1 using u320 HBA
> (LSI 53c1030) and ST373453LC disk (running U160 IIRC).
> If you need more runs on this config, please ask.
>
> Executive summary: < %1 difference for this config.
>
> I'd still like to try a 53c1010 but don't have any installed right now.
> I suspect 53c1010 is alot less efficient at retrieving SG lists
> and will see a bigger difference in perf.
>
>
> One minor issue when starting re-aim-7, but not during the run:
>
> reaim(343): floating-point assist fault at ip 4000000000017a81, isr 0000020000000008
> reaim(343): floating-point assist fault at ip 4000000000017a61, isr 0000020000000008
>
>
> For the record, I retrieved source from:
> http://umn.dl.sourceforge.net/sourceforge/re-aim-7/reaim-0.1.8.tar.gz
>
> This should be renamed to osdl-aim-7 (or something like that).
> The name space collision is unfortunate and annoying.
Apoligies, the naming was not good.
I'll attempt to change it. ( i like osdl-aim-7 )
In the meantime, you can also get the source from
bk://developer.osdl.org/reaim
cliffw
>
> hth,
> grant
>
>
>
>
> #define BIO_VMERGE_BOUNDARY 0 /* (ia64_max_iommu_merge_mask + 1) */
> iota:/mnt# reaim -f /mnt/usr/local/share/reaim/workfile.new_dbase -s100 -e 500 -i 100
>
> REAIM Workload
> Times are in seconds - Child times from tms.cstime and tms.cutime
>
> Num Parent Child Child Jobs per Jobs/min/ Std_dev Std_dev JTI
> Forked Time SysTime UTime Minute Child Time Percent
> 100 110.25 12.67 206.35 5605.19 56.05 3.48 3.29 96
> 200 219.07 25.56 411.93 5642.06 28.21 7.83 3.73 96
> 300 327.59 38.23 615.83 5659.46 18.86 12.79 4.09 95
> 400 436.66 51.19 821.30 5661.19 14.15 18.34 4.42 95
> 500 548.21 65.76 1029.15 5636.54 11.27 23.34 4.47 95
> Max Jobs per Minute 5661.19
> iota:/mnt#
>
>
>
> #define BIO_VMERGE_BOUNDARY (ia64_max_iommu_merge_mask + 1)
>
> iota:/mnt# PATH=$PATH:/mnt/usr/local/bin
> iota:/mnt# reaim -f /mnt/usr/local/share/reaim/workfile.new_dbase -s100 -e 500 -i 100
>
> REAIM Workload
> Times are in seconds - Child times from tms.cstime and tms.cutime
>
> Num Parent Child Child Jobs per Jobs/min/ Std_dev Std_dev JTI
> Forked Time SysTime UTime Minute Child Time Percent
> 100 108.72 12.47 203.78 5684.17 56.84 4.46 4.32 95
> 200 217.64 25.59 408.90 5679.16 28.40 8.65 4.16 95
> 300 326.48 37.88 613.62 5678.81 18.93 13.80 4.44 95
> 400 434.87 50.53 817.64 5684.46 14.21 17.40 4.18 95
> 500 544.69 65.23 1022.92 5672.92 11.35 21.53 4.12 95
> Max Jobs per Minute 5684.46
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2003-08-01 21:52 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-01 16:46 [RFC] block layer support for DMA IOMMU bypass mode James Bottomley
2003-07-01 17:09 ` Andi Kleen
2003-07-01 17:28 ` James Bottomley
2003-07-01 17:42 ` Andi Kleen
2003-07-01 19:22 ` Grant Grundler
2003-07-01 19:56 ` James Bottomley
2003-07-01 17:54 ` H. Peter Anvin
2003-07-01 19:19 ` Grant Grundler
2003-07-01 19:59 ` Alex Williamson
2003-07-01 20:11 ` James Bottomley
2003-07-01 20:03 ` James Bottomley
2003-07-01 23:01 ` Grant Grundler
2003-07-02 15:52 ` James Bottomley
2003-07-01 22:51 ` David S. Miller
2003-07-01 23:57 ` [RFC] block layer support for DMA IOMMU bypass mode II Andi Kleen
2003-07-02 0:03 ` David S. Miller
2003-07-02 0:22 ` Andi Kleen
2003-07-02 0:21 ` David S. Miller
2003-07-02 16:53 ` Grant Grundler
2003-07-02 17:19 ` Andi Kleen
2003-07-02 16:55 ` Grant Grundler
2003-07-02 17:20 ` Andi Kleen
2003-07-02 17:37 ` Grant Grundler
2003-07-02 21:16 ` Alan Cox
2003-07-02 23:56 ` Andi Kleen
2003-07-03 20:26 ` Alan Cox
2003-07-03 21:24 ` Andi Kleen
2003-07-03 22:19 ` Grant Grundler
2003-07-08 2:14 ` David S. Miller
2003-07-08 19:34 ` Andi Kleen
2003-07-08 19:47 ` Jeff Garzik
2003-07-08 20:10 ` Andi Kleen
2003-07-08 20:11 ` Grant Grundler
2003-07-08 22:04 ` David S. Miller
2003-07-08 22:25 ` Grant Grundler
2003-07-08 22:23 ` David S. Miller
2003-07-09 18:55 ` Andi Kleen
2003-07-23 11:40 ` Grant Grundler
2003-07-28 11:15 ` Andi Kleen
2003-07-28 14:59 ` Grant Grundler
2003-07-30 2:31 ` Grant Grundler
2003-08-01 21:51 ` Cliff White [this message]
2003-08-01 23:18 ` reaim now available as osdl-aim-7 - " Cliff White
2003-07-30 4:42 ` Grant Grundler
2003-07-30 4:51 ` David S. Miller
2003-07-30 13:06 ` Grant Grundler
2003-07-30 16:02 ` Grant Grundler
2003-07-30 16:36 ` Andi Kleen
2003-07-30 17:18 ` James Bottomley
2003-07-30 14:20 ` James Bottomley
2003-07-23 13:20 ` Grant Grundler
2003-07-23 15:30 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200308012151.h71LpnR05998@mail.osdl.org \
--to=cliffw@osdl.org \
--cc=James.Bottomley@SteelEye.com \
--cc=ak@suse.de \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=alex_williamson@hp.com \
--cc=axboe@suse.de \
--cc=bjorn_helgaas@hp.com \
--cc=davem@redhat.com \
--cc=grundler@parisc-linux.org \
--cc=linux-kernel@vger.kernel.org \
--cc=suparna@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).