linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Rajat Jain <rajatja@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Keith Busch <keith.busch@intel.com>,
	Vidya Sagar <vidyas@nvidia.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Kees Cook <keescook@chromium.org>,
	"Gustavo A. R. Silva" <garsilva@embeddedor.com>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Sinan Kaya <okaya@codeaurora.org>,
	Frederick Lawler <fred@fredlawl.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	mayurkumar.patel@intel.com, rajatxjain@gmail.com
Subject: Re: [PATCH v2] pci/aspm: Remove CONFIG_PCIEASPM_DEBUG
Date: Fri, 29 Jun 2018 18:27:11 -0500	[thread overview]
Message-ID: <20180629232711.GG40928@bhelgaas-glaptop.roam.corp.google.com> (raw)
In-Reply-To: <20180510233912.96454-1-rajatja@google.com>

On Thu, May 10, 2018 at 04:39:12PM -0700, Rajat Jain wrote:
> Currently, the linux kernel disables ASPM when a device is
> removed from the kernel. But it is not enabled again when
> a new device is added on that slot even if it was originally
> enabled (by the BIOS) when the system booted up (assuming
> POLICY_DEFAULT).
> 
> This was earlier discussed here:
> https://www.spinics.net/lists/linux-pci/msg60212.html
> 
> And some suggestions from Bjorn here:
> https://www.spinics.net/lists/linux-pci/msg60541.html
> 
> This patch picks up one of the suggestion, to remove the
> CONFIG_PCIEASPM_DEBUG and thus make the code always
> avilable. This provides control to userspace to control
> ASPM on a per slot / device basis using sysfs interface.
> 
> Signed-off-by: Rajat Jain <rajatja@google.com>

Applied with Sinan's reviewed-by to pci/aspm for v4.19, thanks!

> ---
> v2: provide function definitions for !CONFIG_PCIEASPM case
> 
>  drivers/pci/pci.h        | 8 ++------
>  drivers/pci/pcie/Kconfig | 8 --------
>  drivers/pci/pcie/aspm.c  | 2 --
>  3 files changed, 2 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 023f7cf25bff..b953b2349ca1 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -358,17 +358,13 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev);
>  void pcie_aspm_exit_link_state(struct pci_dev *pdev);
>  void pcie_aspm_pm_state_change(struct pci_dev *pdev);
>  void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
> +void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev);
> +void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev);
>  #else
>  static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
>  static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
>  static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
>  static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
> -#endif
> -
> -#ifdef CONFIG_PCIEASPM_DEBUG
> -void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev);
> -void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev);
> -#else
>  static inline void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev) { }
>  static inline void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev) { }
>  #endif
> diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
> index b12e28b3d8f9..089b9f559d88 100644
> --- a/drivers/pci/pcie/Kconfig
> +++ b/drivers/pci/pcie/Kconfig
> @@ -46,14 +46,6 @@ config PCIEASPM
>  
>  	  When in doubt, say Y.
>  
> -config PCIEASPM_DEBUG
> -	bool "Debug PCI Express ASPM"
> -	depends on PCIEASPM
> -	default n
> -	help
> -	  This enables PCI Express ASPM debug support. It will add per-device
> -	  interface to control ASPM.
> -
>  choice
>  	prompt "Default ASPM policy"
>  	default PCIEASPM_DEFAULT
> diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
> index c687c817b47d..8ffc13d42baa 100644
> --- a/drivers/pci/pcie/aspm.c
> +++ b/drivers/pci/pcie/aspm.c
> @@ -1161,7 +1161,6 @@ static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp)
>  module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
>  	NULL, 0644);
>  
> -#ifdef CONFIG_PCIEASPM_DEBUG
>  static ssize_t link_state_show(struct device *dev,
>  		struct device_attribute *attr,
>  		char *buf)
> @@ -1264,7 +1263,6 @@ void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
>  		sysfs_remove_file_from_group(&pdev->dev.kobj,
>  			&dev_attr_clk_ctl.attr, power_group);
>  }
> -#endif
>  
>  static int __init pcie_aspm_disable(char *str)
>  {
> -- 
> 2.17.0.441.gb46fe60e1d-goog
> 

  parent reply	other threads:[~2018-06-29 23:27 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-08 23:01 [PATCH] pci/aspm: Remove CONFIG_PCIEASPM_DEBUG Rajat Jain
2018-05-09  6:46 ` okaya
2018-05-09  9:43 ` kbuild test robot
2018-05-10 23:34 ` [PATCH] PM / s2idle: Clear the events_check_enabled flag Rajat Jain
2018-05-10 23:36   ` Rajat Jain
2018-05-10 23:39 ` [PATCH v2] pci/aspm: Remove CONFIG_PCIEASPM_DEBUG Rajat Jain
2018-06-05 22:15   ` Rajat Jain
2018-06-09 23:49     ` Sinan Kaya
2018-06-29 23:27   ` Bjorn Helgaas [this message]
2018-07-27 20:26   ` Bjorn Helgaas
2018-07-27 21:03     ` Takashi Iwai
2018-07-29  0:16     ` Sinan Kaya
2018-07-30 14:14       ` Bjorn Helgaas
2018-07-30 16:08         ` Sinan Kaya
2018-07-30  8:32     ` Lukas Wunner
2018-07-30 17:26       ` Bjorn Helgaas
2018-07-30 16:18     ` Rajat Jain
2018-07-31  8:13     ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180629232711.GG40928@bhelgaas-glaptop.roam.corp.google.com \
    --to=helgaas@kernel.org \
    --cc=ard.biesheuvel@linaro.org \
    --cc=bhelgaas@google.com \
    --cc=fred@fredlawl.com \
    --cc=garsilva@embeddedor.com \
    --cc=keescook@chromium.org \
    --cc=keith.busch@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mayurkumar.patel@intel.com \
    --cc=okaya@codeaurora.org \
    --cc=pombredanne@nexb.com \
    --cc=rajatja@google.com \
    --cc=rajatxjain@gmail.com \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).