[PATCH v2 07/13] dt-bindings: net: Convert Calxeda Ethernet binding to json-schema

From: Andre Przywara <andre.przywara@arm.com>
To: Rob Herring <robh@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Cc: Maxime Ripard <mripard@kernel.org>,
	Robert Richter <rric@kernel.org>,
	soc@kernel.org, Jon Loeliger <jdl@jdl.com>,
	Mark Langsdorf <mlangsdo@redhat.com>,
	Eric Auger <eric.auger@redhat.com>, Will Deacon <will@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>
Subject: [PATCH v2 07/13] dt-bindings: net: Convert Calxeda Ethernet binding to json-schema
Date: Thu, 27 Feb 2020 18:22:04 +0000	[thread overview]
Message-ID: <20200227182210.89512-8-andre.przywara@arm.com> (raw)
In-Reply-To: <20200227182210.89512-1-andre.przywara@arm.com>

Convert the Calxeda XGMAC Ethernet device binding to DT schema format
using json-schema.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 .../devicetree/bindings/net/calxeda-xgmac.txt | 18 -------
 .../bindings/net/calxeda-xgmac.yaml           | 49 +++++++++++++++++++
 2 files changed, 49 insertions(+), 18 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.txt
 create mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.yaml

diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
deleted file mode 100644
index c8ae996bd8f2..000000000000
--- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Calxeda Highbank 10Gb XGMAC Ethernet
-
-Required properties:
-- compatible : Should be "calxeda,hb-xgmac"
-- reg : Address and length of the register set for the device
-- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt.
-  The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt.
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-
-Example:
-
-ethernet@fff50000 {
-        compatible = "calxeda,hb-xgmac";
-        reg = <0xfff50000 0x1000>;
-        interrupts = <0 77 4  0 78 4  0 79 4>;
-};
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
new file mode 100644
index 000000000000..a8c1f00cff0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank 10Gb XGMAC Ethernet controller
+
+description: |
+  The Calxeda XGMAC Ethernet controllers are directly connected to the
+  internal machine "network fabric", which is set up, initialised and
+  managed by the firmware. So there are no PHY properties in this
+  binding. Switches in the fabric take care of routing and mapping the
+  traffic to external network ports.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-xgmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      Can point to at most 3 xgmac interrupts. The 1st one is the main
+      interrupt, the 2nd one is used for power management. The optional
+      3rd one is the low power state interrupt.
+    minItems: 2
+    maxItems: 3
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@fff50000 {
+        compatible = "calxeda,hb-xgmac";
+        reg = <0xfff50000 0x1000>;
+        interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
+    };
-- 
2.17.1

