From: Alban Bedel <alban.bedel@aerq.com>
To: linux-hwmon@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Alban Bedel <alban.bedel@aerq.com>
Subject: [PATCH 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml
Date: Thu, 17 Sep 2020 12:18:17 +0200 [thread overview]
Message-ID: <20200917101819.32045-2-alban.bedel@aerq.com> (raw)
In-Reply-To: <20200917101819.32045-1-alban.bedel@aerq.com>
In order to automate the verification of DT nodes convert lm75.txt to
lm75.yaml.
Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
---
.../devicetree/bindings/hwmon/lm75.txt | 39 -------------
.../devicetree/bindings/hwmon/lm75.yaml | 55 +++++++++++++++++++
2 files changed, 55 insertions(+), 39 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/lm75.txt
create mode 100644 Documentation/devicetree/bindings/hwmon/lm75.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.txt b/Documentation/devicetree/bindings/hwmon/lm75.txt
deleted file mode 100644
index 273616702c51..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm75.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-*LM75 hwmon sensor.
-
-Required properties:
-- compatible: manufacturer and chip name, one of
- "adi,adt75",
- "dallas,ds1775",
- "dallas,ds75",
- "dallas,ds7505",
- "gmt,g751",
- "national,lm75",
- "national,lm75a",
- "national,lm75b",
- "maxim,max6625",
- "maxim,max6626",
- "maxim,max31725",
- "maxim,max31726",
- "maxim,mcp980x",
- "nxp,pct2075",
- "st,stds75",
- "st,stlm75",
- "microchip,tcn75",
- "ti,tmp100",
- "ti,tmp101",
- "ti,tmp105",
- "ti,tmp112",
- "ti,tmp175",
- "ti,tmp275",
- "ti,tmp75",
- "ti,tmp75b",
- "ti,tmp75c",
-
-- reg: I2C bus address of the device
-
-Example:
-
-sensor@48 {
- compatible = "st,stlm75";
- reg = <0x48>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
new file mode 100644
index 000000000000..78d6291fcdcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lm75.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM75 hwmon sensor
+
+maintainers:
+ - Jean Delvare <jdelvare@suse.com>
+ - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+ compatible:
+ enum:
+ - adi,adt75
+ - dallas,ds1775
+ - dallas,ds75
+ - dallas,ds7505
+ - gmt,g751
+ - national,lm75
+ - national,lm75a
+ - national,lm75b
+ - maxim,max6625
+ - maxim,max6626
+ - maxim,max31725
+ - maxim,max31726
+ - maxim,mcp980x
+ - nxp,pct2075
+ - st,stds75
+ - st,stlm75
+ - microchip,tcn75
+ - ti,tmp100
+ - ti,tmp101
+ - ti,tmp105
+ - ti,tmp112
+ - ti,tmp175
+ - ti,tmp275
+ - ti,tmp75
+ - ti,tmp75b
+ - ti,tmp75c
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ sensor@48 {
+ compatible = "st,stlm75";
+ reg = <0x48>;
+ };
--
2.25.1
next prev parent reply other threads:[~2020-09-17 10:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-17 10:18 [PATCH 0/3] hwmon: (lm75) Add regulator support Alban Bedel
2020-09-17 10:18 ` Alban Bedel [this message]
2020-09-18 17:28 ` [PATCH 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml Rob Herring
2020-09-17 10:18 ` [PATCH 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings Alban Bedel
2020-09-23 20:16 ` Rob Herring
2020-09-17 10:18 ` [PATCH 3/3] hwmon: (lm75) Add regulator support Alban Bedel
2020-09-17 11:00 ` Mark Brown
2020-09-18 2:04 ` Guenter Roeck
2020-09-18 10:03 ` Mark Brown
2020-09-18 5:33 ` Guenter Roeck
2020-09-18 10:04 ` Mark Brown
2020-09-28 15:13 ` Bedel, Alban
2020-09-28 16:29 ` Guenter Roeck
2020-09-28 16:31 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200917101819.32045-2-alban.bedel@aerq.com \
--to=alban.bedel@aerq.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=lgirdwood@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).