From: Rob Herring <robh@kernel.org>
To: Alban Bedel <alban.bedel@aerq.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jean Delvare <jdelvare@suse.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-hwmon@vger.kernel.org, Rob Herring <robh+dt@kernel.org>
Subject: Re: [PATCH 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml
Date: Fri, 18 Sep 2020 11:28:58 -0600 [thread overview]
Message-ID: <20200918172858.GA3826509@bogus> (raw)
In-Reply-To: <20200917101819.32045-2-alban.bedel@aerq.com>
On Thu, 17 Sep 2020 12:18:17 +0200, Alban Bedel wrote:
> In order to automate the verification of DT nodes convert lm75.txt to
> lm75.yaml.
>
> Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
> ---
> .../devicetree/bindings/hwmon/lm75.txt | 39 -------------
> .../devicetree/bindings/hwmon/lm75.yaml | 55 +++++++++++++++++++
> 2 files changed, 55 insertions(+), 39 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/lm75.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/lm75.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/hwmon/lm75.example.dts:21.17-30: Warning (reg_format): /example-0/sensor@48:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/hwmon/lm75.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/lm75.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/lm75.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/lm75.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/lm75.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/hwmon/lm75.example.dt.yaml: example-0: sensor@48:reg:0: [72] is too short
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
See https://patchwork.ozlabs.org/patch/1366031
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
next prev parent reply other threads:[~2020-09-18 17:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-17 10:18 [PATCH 0/3] hwmon: (lm75) Add regulator support Alban Bedel
2020-09-17 10:18 ` [PATCH 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml Alban Bedel
2020-09-18 17:28 ` Rob Herring [this message]
2020-09-17 10:18 ` [PATCH 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings Alban Bedel
2020-09-23 20:16 ` Rob Herring
2020-09-17 10:18 ` [PATCH 3/3] hwmon: (lm75) Add regulator support Alban Bedel
2020-09-17 11:00 ` Mark Brown
2020-09-18 2:04 ` Guenter Roeck
2020-09-18 10:03 ` Mark Brown
2020-09-18 5:33 ` Guenter Roeck
2020-09-18 10:04 ` Mark Brown
2020-09-28 15:13 ` Bedel, Alban
2020-09-28 16:29 ` Guenter Roeck
2020-09-28 16:31 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200918172858.GA3826509@bogus \
--to=robh@kernel.org \
--cc=alban.bedel@aerq.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=lgirdwood@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).