From: Ansuel Smith <ansuelsmth@gmail.com>
To: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Ansuel Smith <ansuelsmth@gmail.com>,
Amit Kucheria <amitk@kernel.org>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v11 4/9] drivers: thermal: tsens: Use init_common for msm8960
Date: Fri, 19 Mar 2021 01:52:22 +0100 [thread overview]
Message-ID: <20210319005228.1250-5-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20210319005228.1250-1-ansuelsmth@gmail.com>
Use init_common and drop custom init for msm8960.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
drivers/thermal/qcom/tsens-8960.c | 52 +------------------------------
1 file changed, 1 insertion(+), 51 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 3f4fc1ffe679..86585f439985 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -173,56 +173,6 @@ static void disable_8960(struct tsens_priv *priv)
regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
}
-static int init_8960(struct tsens_priv *priv)
-{
- int ret, i;
- u32 reg_cntl;
-
- priv->tm_map = dev_get_regmap(priv->dev, NULL);
- if (!priv->tm_map)
- return -ENODEV;
-
- /*
- * The status registers for each sensor are discontiguous
- * because some SoCs have 5 sensors while others have more
- * but the control registers stay in the same place, i.e
- * directly after the first 5 status registers.
- */
- for (i = 0; i < priv->num_sensors; i++) {
- if (i >= 5)
- priv->sensor[i].status = S0_STATUS_ADDR + 40;
- priv->sensor[i].status += i * 4;
- }
-
- reg_cntl = SW_RST;
- ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
- if (ret)
- return ret;
-
- if (priv->num_sensors > 1) {
- reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
- reg_cntl &= ~SW_RST;
- ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
- CONFIG_MASK, CONFIG);
- } else {
- reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
- reg_cntl &= ~CONFIG_MASK_8660;
- reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
- }
-
- reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
- ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
- if (ret)
- return ret;
-
- reg_cntl |= EN;
- ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
- if (ret)
- return ret;
-
- return 0;
-}
-
static int calibrate_8960(struct tsens_priv *priv)
{
int i;
@@ -346,7 +296,7 @@ static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
};
static const struct tsens_ops ops_8960 = {
- .init = init_8960,
+ .init = init_common,
.calibrate = calibrate_8960,
.get_temp = get_temp_8960,
.enable = enable_8960,
--
2.30.2
next prev parent reply other threads:[~2021-03-19 0:53 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-19 0:52 [PATCH v11 0/9] Add support for ipq8064 tsens Ansuel Smith
2021-03-19 0:52 ` [PATCH v11 1/9] drivers: thermal: tsens: Add VER_0 tsens version Ansuel Smith
2021-03-19 13:11 ` Thara Gopinath
2021-03-19 13:28 ` Ansuel Smith
2021-03-19 14:11 ` Thara Gopinath
2021-03-19 0:52 ` [PATCH v11 2/9] drivers: thermal: tsens: Don't hardcode sensor slope Ansuel Smith
2021-03-19 0:52 ` [PATCH v11 3/9] drivers: thermal: tsens: Convert msm8960 to reg_field Ansuel Smith
2021-03-19 0:52 ` Ansuel Smith [this message]
2021-03-19 0:52 ` [PATCH v11 5/9] drivers: thermal: tsens: Fix bug in sensor enable for msm8960 Ansuel Smith
2021-03-19 13:11 ` Thara Gopinath
2021-03-22 10:47 ` Marc Gonzalez
2021-03-19 0:52 ` [PATCH v11 6/9] drivers: thermal: tsens: Replace custom 8960 apis with generic apis Ansuel Smith
2021-03-19 13:12 ` Thara Gopinath
2021-03-19 0:52 ` [PATCH v11 7/9] drivers: thermal: tsens: Drop unused define for msm8960 Ansuel Smith
2021-03-19 13:12 ` Thara Gopinath
2021-03-19 0:52 ` [PATCH v11 8/9] drivers: thermal: tsens: Add support for ipq8064-tsens Ansuel Smith
2021-03-19 0:52 ` [PATCH v11 9/9] dt-bindings: thermal: tsens: Document ipq8064 bindings Ansuel Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210319005228.1250-5-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=thara.gopinath@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).