From: Ansuel Smith <ansuelsmth@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ansuel Smith <ansuelsmth@gmail.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Vivien Didelot <vivien.didelot@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH net-next v3 17/20] net: phy: phylink: permit to pass dev_flags to phylink_connect_phy
Date: Wed, 5 May 2021 00:29:11 +0200 [thread overview]
Message-ID: <20210504222915.17206-17-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20210504222915.17206-1-ansuelsmth@gmail.com>
Add support for phylink_connect_phy to pass dev_flags to the PHY driver.
Change any user of phylink_connect_phy to pass 0 as dev_flags by
default.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/net/ethernet/cadence/macb_main.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
drivers/net/phy/phylink.c | 12 +++++++-----
include/linux/phylink.h | 2 +-
net/dsa/slave.c | 2 +-
5 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 0f6a6cb7e98d..459243c08b0c 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -834,7 +834,7 @@ static int macb_phylink_connect(struct macb *bp)
}
/* attach the mac to the phy */
- ret = phylink_connect_phy(bp->phylink, phydev);
+ ret = phylink_connect_phy(bp->phylink, phydev, 0);
}
if (ret) {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4749bd0af160..ece84bb64b37 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1099,7 +1099,7 @@ static int stmmac_init_phy(struct net_device *dev)
return -ENODEV;
}
- ret = phylink_connect_phy(priv->phylink, phydev);
+ ret = phylink_connect_phy(priv->phylink, phydev, 0);
}
phylink_ethtool_get_wol(priv->phylink, &wol);
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index dc2800beacc3..95f6a10e90ef 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1018,7 +1018,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
}
static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
- phy_interface_t interface)
+ phy_interface_t interface, u32 flags)
{
if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
(pl->cfg_link_an_mode == MLO_AN_INBAND &&
@@ -1028,13 +1028,14 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
if (pl->phydev)
return -EBUSY;
- return phy_attach_direct(pl->netdev, phy, 0, interface);
+ return phy_attach_direct(pl->netdev, phy, flags, interface);
}
/**
* phylink_connect_phy() - connect a PHY to the phylink instance
* @pl: a pointer to a &struct phylink returned from phylink_create()
* @phy: a pointer to a &struct phy_device.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
*
* Connect @phy to the phylink instance specified by @pl by calling
* phy_attach_direct(). Configure the @phy according to the MAC driver's
@@ -1046,7 +1047,8 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
*
* Returns 0 on success or a negative errno.
*/
-int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
+int phylink_connect_phy(struct phylink *pl, struct phy_device *phy,
+ u32 flags)
{
int ret;
@@ -1056,7 +1058,7 @@ int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
pl->link_config.interface = pl->link_interface;
}
- ret = phylink_attach_phy(pl, phy, pl->link_interface);
+ ret = phylink_attach_phy(pl, phy, pl->link_interface, flags);
if (ret < 0)
return ret;
@@ -2207,7 +2209,7 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
return ret;
interface = pl->link_config.interface;
- ret = phylink_attach_phy(pl, phy, interface);
+ ret = phylink_attach_phy(pl, phy, interface, 0);
if (ret < 0)
return ret;
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index d81a714cfbbd..cd563ba67ca0 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -437,7 +437,7 @@ struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
void phylink_set_pcs(struct phylink *, struct phylink_pcs *pcs);
void phylink_destroy(struct phylink *);
-int phylink_connect_phy(struct phylink *, struct phy_device *);
+int phylink_connect_phy(struct phylink *, struct phy_device *, u32 flags);
int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
void phylink_disconnect_phy(struct phylink *);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 992fcab4b552..8ecfcb553ac1 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1718,7 +1718,7 @@ static int dsa_slave_phy_connect(struct net_device *slave_dev, int addr)
return -ENODEV;
}
- return phylink_connect_phy(dp->pl, slave_dev->phydev);
+ return phylink_connect_phy(dp->pl, slave_dev->phydev, 0);
}
static int dsa_slave_phy_setup(struct net_device *slave_dev)
--
2.30.2
next prev parent reply other threads:[~2021-05-04 22:31 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-04 22:28 [RFC PATCH net-next v3 01/20] net: mdio: ipq8064: clean whitespaces in define Ansuel Smith
2021-05-04 22:28 ` [RFC PATCH net-next v3 02/20] net: mdio: ipq8064: add regmap config to disable REGCACHE Ansuel Smith
2021-05-04 22:28 ` [RFC PATCH net-next v3 03/20] net: mdio: ipq8064: enlarge sleep after read/write operation Ansuel Smith
2021-05-04 22:28 ` [RFC PATCH net-next v3 04/20] net: dsa: qca8k: handle qca8k_set_page errors Ansuel Smith
2021-05-05 0:25 ` Andrew Lunn
2021-05-05 0:26 ` Andrew Lunn
2021-05-04 22:28 ` [RFC PATCH net-next v3 05/20] net: dsa: qca8k: handle error with qca8k_read operation Ansuel Smith
2021-05-05 0:36 ` Andrew Lunn
2021-05-05 0:44 ` Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 06/20] net: dsa: qca8k: handle error with qca8k_write operation Ansuel Smith
2021-05-05 0:41 ` Andrew Lunn
2021-05-05 0:47 ` Ansuel Smith
2021-05-06 11:19 ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 07/20] net: dsa: qca8k: handle error with qca8k_rmw operation Ansuel Smith
2021-05-05 0:46 ` Andrew Lunn
2021-05-05 0:51 ` Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 08/20] net: dsa: qca8k: add support for qca8327 switch Ansuel Smith
2021-05-05 0:48 ` Andrew Lunn
2021-05-06 11:20 ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 09/20] devicetree: net: dsa: qca8k: Document new compatible qca8327 Ansuel Smith
2021-05-05 0:48 ` Andrew Lunn
2021-05-06 21:07 ` Rob Herring
2021-05-04 22:29 ` [RFC PATCH net-next v3 10/20] net: dsa: qca8k: add priority tweak to qca8337 switch Ansuel Smith
2021-05-05 0:53 ` Andrew Lunn
2021-05-06 11:16 ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 11/20] net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327 Ansuel Smith
2021-05-05 0:54 ` Andrew Lunn
2021-05-04 22:29 ` [RFC PATCH net-next v3 12/20] net: dsa: qca8k: add support for switch rev Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 13/20] net: dsa: qca8k: make rgmii delay configurable Ansuel Smith
2021-05-05 1:00 ` Andrew Lunn
2021-05-05 1:07 ` Ansuel Smith
2021-05-06 11:10 ` Vladimir Oltean
2021-05-06 21:53 ` Ansuel Smith
2021-05-07 8:51 ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 14/20] net: dsa: qca8k: clear MASTER_EN after phy read/write Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 15/20] net: dsa: qca8k: dsa: qca8k: protect MASTER busy_wait with mdio mutex Ansuel Smith
2021-05-05 1:04 ` Andrew Lunn
2021-05-04 22:29 ` [RFC PATCH net-next v3 16/20] net: dsa: qca8k: enlarge mdio delay and timeout Ansuel Smith
2021-05-06 11:27 ` Vladimir Oltean
2021-05-04 22:29 ` Ansuel Smith [this message]
2021-05-04 22:33 ` [RFC PATCH net-next v3 17/20] net: phy: phylink: permit to pass dev_flags to phylink_connect_phy Florian Fainelli
2021-05-05 0:35 ` Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 18/20] net: dsa: slave: pass dev_flags also to internal PHY Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 19/20] net: dsa: qca8k: pass switch_revision info to phy dev_flags Ansuel Smith
2021-05-06 11:24 ` Vladimir Oltean
2021-05-07 23:26 ` Ansuel Smith
2021-05-07 23:33 ` Russell King - ARM Linux admin
2021-05-07 23:51 ` Ansuel Smith
2021-05-08 17:31 ` Andrew Lunn
2021-05-08 18:26 ` Vladimir Oltean
2021-05-08 19:39 ` Russell King - ARM Linux admin
2021-05-08 20:55 ` Andrew Lunn
2021-05-07 9:44 ` Russell King - ARM Linux admin
2021-05-04 22:29 ` [RFC PATCH net-next v3 20/20] net: phy: add qca8k driver for qca8k switch internal PHY Ansuel Smith
2021-05-05 1:11 ` Andrew Lunn
2021-05-05 1:17 ` Ansuel Smith
2021-05-05 12:06 ` Andrew Lunn
2021-05-05 0:17 ` [RFC PATCH net-next v3 01/20] net: mdio: ipq8064: clean whitespaces in define Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210504222915.17206-17-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=claudiu.beznea@microchip.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=olteanv@gmail.com \
--cc=peppe.cavallaro@st.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).