Re: [RFC PATCH net-next v3 15/20] net: dsa: qca8k: dsa: qca8k: protect MASTER busy_wait with mdio mutex

[Andrew Lunn <andrew@lunn.ch>]

On Wed, May 05, 2021 at 12:29:09AM +0200, Ansuel Smith wrote:
> MDIO_MASTER operation have a dedicated busy wait that is not protected
> by the mdio mutex. This can cause situation where the MASTER operation
> is done and a normal operation is executed between the MASTER read/write
> and the MASTER busy_wait. Rework the qca8k_mdio_read/write function to
> address this issue by binding the lock for the whole MASTER operation
> and not only the mdio read/write common operation.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/net/dsa/qca8k.c | 69 ++++++++++++++++++++++++++++++++++-------
>  1 file changed, 57 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> index b21835d719b5..27234dd4c74a 100644
> --- a/drivers/net/dsa/qca8k.c
> +++ b/drivers/net/dsa/qca8k.c
> @@ -633,9 +633,33 @@ qca8k_port_to_phy(int port)
>  	return port - 1;
>  }
>  
> +static int
> +qca8k_mdio_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
> +{
> +	unsigned long timeout;
> +	u16 r1, r2, page;
> +
> +	qca8k_split_addr(reg, &r1, &r2, &page);
> +
> +	timeout = jiffies + msecs_to_jiffies(20);
> +
> +	/* loop until the busy flag has cleared */
> +	do {
> +		u32 val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
> +		int busy = val & mask;
> +
> +		if (!busy)
> +			break;
> +		cond_resched();
> +	} while (!time_after_eq(jiffies, timeout));

include/linux/iopoll.h


> +
> +	return time_after_eq(jiffies, timeout);
> +}
> +
>  static int
>  qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
>  {
> +	u16 r1, r2, page;
>  	u32 phy, val;
>  	int ret;
>  
> @@ -651,12 +675,22 @@ qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
>  	      QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
>  	      QCA8K_MDIO_MASTER_DATA(data);
>  
> -	ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
> +	qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
> +
> +	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
> +
> +	ret = qca8k_set_page(priv->bus, page);
>  	if (ret)
> -		return ret;
> +		goto exit;
>  
> -	ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
> -			      QCA8K_MDIO_MASTER_BUSY);
> +	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
> +
> +	if (qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
> +				 QCA8K_MDIO_MASTER_BUSY))
> +		ret = -ETIMEDOUT;

qca8k_mdio_busy_wait() should be returning -EIMEDOUT.

       Andrew