From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<ludovic.desroches@microchip.com>
Cc: <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v4 02/17] clk: at91: pmc: execute suspend/resume only for backup mode
Date: Thu, 23 Sep 2021 16:20:31 +0300 [thread overview]
Message-ID: <20210923132046.1860549-3-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20210923132046.1860549-1-claudiu.beznea@microchip.com>
Before going to backup mode architecture specific PM code sets the first
word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()).
Thus take this into account when suspending/resuming clocks. This will
avoid executing unnecessary instructions when suspending to non backup
modes. Also this commit changed the postcore_initcall() with
subsys_initcall() to be able to execute of_find_compatible_node() since
this was not available at the moment of postcore_initcall(). This should
not alter the tcb_clksrc since the changes are related to clocks
suspend/resume procedure that will be executed at the user space request,
thus long ago after subsys_initcall().
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/clk/at91/pmc.c | 49 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 47 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index b2806946a77a..58e9c088cb22 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -8,6 +8,8 @@
#include <linux/clkdev.h>
#include <linux/clk/at91_pmc.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -110,13 +112,35 @@ struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
}
#ifdef CONFIG_PM
+
+/* Address in SECURAM that say if we suspend to backup mode. */
+static void __iomem *at91_pmc_backup_suspend;
+
static int at91_pmc_suspend(void)
{
+ unsigned int backup;
+
+ if (!at91_pmc_backup_suspend)
+ return 0;
+
+ backup = *(unsigned int *)at91_pmc_backup_suspend;
+ if (!backup)
+ return 0;
+
return clk_save_context();
}
static void at91_pmc_resume(void)
{
+ unsigned int backup;
+
+ if (!at91_pmc_backup_suspend)
+ return;
+
+ backup = *(unsigned int *)at91_pmc_backup_suspend;
+ if (!backup)
+ return;
+
clk_restore_context();
}
@@ -132,6 +156,7 @@ static const struct of_device_id sama5d2_pmc_dt_ids[] = {
static int __init pmc_register_ops(void)
{
+ struct platform_device *pdev;
struct device_node *np;
np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids);
@@ -144,10 +169,30 @@ static int __init pmc_register_ops(void)
}
of_node_put(np);
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
+ if (!np)
+ return -ENODEV;
+
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ pdev = of_find_device_by_node(np);
+ of_node_put(np);
+ if (!pdev)
+ return -ENODEV;
+
+ at91_pmc_backup_suspend = of_iomap(np, 0);
+ if (!at91_pmc_backup_suspend) {
+ pr_warn("%s(): unable to map securam\n", __func__);
+ return -ENOMEM;
+ }
+
register_syscore_ops(&pmc_syscore_ops);
return 0;
}
-/* This has to happen before arch_initcall because of the tcb_clksrc driver */
-postcore_initcall(pmc_register_ops);
+
+subsys_initcall(pmc_register_ops);
#endif
--
2.25.1
next prev parent reply other threads:[~2021-09-23 13:21 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-23 13:20 [PATCH v4 00/17] clk: at91: updates for power management and dvfs Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 01/17] clk: at91: re-factor clocks suspend/resume Claudiu Beznea
2021-09-23 13:23 ` Claudiu.Beznea
2021-09-23 13:20 ` Claudiu Beznea [this message]
2021-10-08 3:51 ` [PATCH v4 02/17] clk: at91: pmc: execute suspend/resume only for backup mode Stephen Boyd
2021-10-08 6:47 ` Claudiu.Beznea
2021-10-08 22:05 ` Stephen Boyd
2021-09-23 13:20 ` [PATCH v4 03/17] clk: at91: sama7g5: add securam's peripheral clock Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 04/17] clk: at91: clk-master: add register definition for sama7g5's master clock Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 05/17] clk: at91: clk-master: improve readability by using local variables Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 06/17] clk: at91: pmc: add sama7g5 to the list of available pmcs Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 07/17] clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 08/17] clk: at91: clk-master: check if div or pres is zero Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 09/17] clk: at91: clk-master: mask mckr against layout->mask Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 10/17] clk: at91: clk-master: fix prescaler logic Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 11/17] clk: at91: clk-sam9x60-pll: add notifier for div part of PLL Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 12/17] clk: at91: clk-master: add notifier for divider Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 13/17] clk: at91: sama7g5: remove prescaler part of master clock Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 14/17] clk: at91: sama7g5: set low limit for mck0 at 32KHz Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 15/17] clk: use clk_core_get_rate_recalc() in clk_rate_get() Claudiu Beznea
2021-09-23 13:20 ` [PATCH v4 16/17] clk: remove extra empty line Claudiu Beznea
2021-10-08 3:54 ` Stephen Boyd
2021-09-23 13:20 ` [PATCH v4 17/17] clk: do not initialize ret Claudiu Beznea
2021-10-08 3:55 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210923132046.1860549-3-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).