From: Potin Lai <potin.lai@quantatw.com>
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>
Cc: Patrick Williams <patrick@stwcx.xyz>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
Potin Lai <potin.lai@quantatw.com>
Subject: [PATCH v2 03/10] arch: arm: dts: bletchley: update gpio-line-names
Date: Mon, 14 Feb 2022 12:25:31 +0800 [thread overview]
Message-ID: <20220214042538.12132-4-potin.lai@quantatw.com> (raw)
In-Reply-To: <20220214042538.12132-1-potin.lai@quantatw.com>
update gpio-line-names based on EVT HW schematic
- gpio0:
- BSM_FRU_WP (G0, out)
- PWRGD_P1V05_VDDCORE (G4, in)
- PWRGD_P1V5_VDD (G5, in)
- BSM_FLASH_WP_STATUS (I5, in)
- BMC_TPM_PRES (I6, in)
- BMC_RTC_INT (L5, in)
- BMC_HEARTBEAT (P7, out)
- PWRGD_CNS_PSU (V0, in)
- PSU_PRSNT (V3, in)
- BMC_SELF_HW_RST (Y0, out)
- BSM_PRSNT (Y1, in)
- sled1_led pca9522:
- SLED1_MD_REF_PWM (3, out)
- sled2_led pca9522:
- SLED2_MD_REF_PWM (3, out)
- sled3_led pca9522:
- SLED3_MD_REF_PWM (3, out)
- sled4_led pca9522:
- SLED4_MD_REF_PWM (3, out)
- sled5_led pca9522:
- SLED5_MD_REF_PWM (3, out)
- sled6_led pca9522:
- SLED6_MD_REF_PWM (3, out)
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
---
.../dts/aspeed-bmc-facebook-bletchley.dts | 26 ++++++++++---------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index ebd2430a3bdd..fc0690ccdb0a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -270,7 +270,7 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",
+ "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@@ -333,7 +333,7 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",
+ "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@@ -400,7 +400,7 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",
+ "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@@ -463,7 +463,7 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",
+ "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@@ -526,7 +526,7 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",
+ "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@@ -589,7 +589,7 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","",
+ "led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@@ -727,16 +727,17 @@
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","","","","","","",
- /*G0-G7*/ "","SWITCH_FRU_MUX","","","","","","",
+ /*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","",
+ "PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
/*H0-H7*/ "presence-riser1","presence-riser2",
"presence-sled1","presence-sled2",
"presence-sled3","presence-sled4",
"presence-sled5","presence-sled6",
/*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2",
- "","","","",
+ "","BSM_FLASH_WP_STATUS","BMC_TPM_PRES","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
- /*L0-L7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","BMC_RTC_INT","","",
/*M0-M7*/ "ALERT_SLED1","ALERT_SLED2",
"ALERT_SLED3","ALERT_SLED4",
"ALERT_SLED5","ALERT_SLED6",
@@ -744,19 +745,20 @@
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","",
"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
- /*P0-P7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","BMC_HEARTBEAT",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","BAT_DETECT",
"BMC_BT_WP0","BMC_BT_WP1","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
- /*V0-V7*/ "","RST_BMC_MVL","","",
+ /*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL","","PSU_PRSNT",
"USB2_SEL0_A","USB2_SEL1_A",
"USB2_SEL0_B","USB2_SEL1_B",
/*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","",
/*X0-X7*/ "","","","","","","","",
- /*Y0-Y7*/ "","","BSM_FLASH_LATCH","","","","","",
+ /*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT","BSM_FLASH_LATCH","",
+ "","","","",
/*Z0-Z7*/ "","","","","","","","";
};
--
2.17.1
next prev parent reply other threads:[~2022-02-14 4:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-14 4:25 [PATCH v2 00/10] update Facebook Bletchley BMC Potin Lai
2022-02-14 4:25 ` [PATCH v2 01/10] arch: arm: dts: bletchley: switch sled numbering to 1-based Potin Lai
2022-02-14 4:25 ` [PATCH v2 02/10] arch: arm: dts: bletchley: separate leds into multiple groups Potin Lai
2022-02-14 4:25 ` Potin Lai [this message]
2022-02-14 4:25 ` [PATCH v2 04/10] arch: arm: dts: bletchley: update fmc configurations Potin Lai
2022-02-14 4:25 ` [PATCH v2 05/10] arch: arm: dts: bletchley: switch to spi-gpio for spi2 Potin Lai
2022-02-15 5:48 ` Joel Stanley
2022-02-14 4:25 ` [PATCH v2 06/10] arch: arm: dts: bletchley: add interrupt support for sled io expander Potin Lai
2022-02-14 4:25 ` [PATCH v2 07/10] arch: arm: dts: bletchley: add shunt-resistor for ADM1278 Potin Lai
2022-02-14 4:25 ` [PATCH v2 08/10] arch: arm: dts: bletchley: add INA230 sensor on each sled Potin Lai
2022-02-14 4:25 ` [PATCH v2 09/10] arch: arm: dts: bletchley: enable mdio3 bus Potin Lai
2022-02-14 4:25 ` [PATCH v2 10/10] arch: arm: dts: bletchley: cleanup redundant nodes Potin Lai
2022-02-14 18:27 ` [PATCH v2 00/10] update Facebook Bletchley BMC Patrick Williams
2022-02-15 5:51 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220214042538.12132-4-potin.lai@quantatw.com \
--to=potin.lai@quantatw.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).