From: Potin Lai <potin.lai@quantatw.com>
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>
Cc: Patrick Williams <patrick@stwcx.xyz>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
Potin Lai <potin.lai@quantatw.com>
Subject: [PATCH v2 08/10] arch: arm: dts: bletchley: add INA230 sensor on each sled
Date: Mon, 14 Feb 2022 12:25:36 +0800 [thread overview]
Message-ID: <20220214042538.12132-9-potin.lai@quantatw.com> (raw)
In-Reply-To: <20220214042538.12132-1-potin.lai@quantatw.com>
add INA230 node on each sled base on EVT HW
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
---
.../dts/aspeed-bmc-facebook-bletchley.dts | 36 +++++++++++++++----
1 file changed, 30 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index 76c086ea7b71..8c8fbfcbb257 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -249,7 +249,11 @@
&i2c0 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -315,7 +319,11 @@
&i2c1 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -385,7 +393,11 @@
&i2c2 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -451,7 +463,11 @@
&i2c3 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -517,7 +533,11 @@
&i2c4 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -583,7 +603,11 @@
&i2c5 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
--
2.17.1
next prev parent reply other threads:[~2022-02-14 4:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-14 4:25 [PATCH v2 00/10] update Facebook Bletchley BMC Potin Lai
2022-02-14 4:25 ` [PATCH v2 01/10] arch: arm: dts: bletchley: switch sled numbering to 1-based Potin Lai
2022-02-14 4:25 ` [PATCH v2 02/10] arch: arm: dts: bletchley: separate leds into multiple groups Potin Lai
2022-02-14 4:25 ` [PATCH v2 03/10] arch: arm: dts: bletchley: update gpio-line-names Potin Lai
2022-02-14 4:25 ` [PATCH v2 04/10] arch: arm: dts: bletchley: update fmc configurations Potin Lai
2022-02-14 4:25 ` [PATCH v2 05/10] arch: arm: dts: bletchley: switch to spi-gpio for spi2 Potin Lai
2022-02-15 5:48 ` Joel Stanley
2022-02-14 4:25 ` [PATCH v2 06/10] arch: arm: dts: bletchley: add interrupt support for sled io expander Potin Lai
2022-02-14 4:25 ` [PATCH v2 07/10] arch: arm: dts: bletchley: add shunt-resistor for ADM1278 Potin Lai
2022-02-14 4:25 ` Potin Lai [this message]
2022-02-14 4:25 ` [PATCH v2 09/10] arch: arm: dts: bletchley: enable mdio3 bus Potin Lai
2022-02-14 4:25 ` [PATCH v2 10/10] arch: arm: dts: bletchley: cleanup redundant nodes Potin Lai
2022-02-14 18:27 ` [PATCH v2 00/10] update Facebook Bletchley BMC Patrick Williams
2022-02-15 5:51 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220214042538.12132-9-potin.lai@quantatw.com \
--to=potin.lai@quantatw.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).