[PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[Jingbao Qiu]

Implement the RTC driver for CV1800, which able to provide time alarm
and calibrate functionality.

Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
---

Depends on https://lore.kernel.org/all/IA1PR20MB4953C774D41EDF1EADB6EC18BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com/

---
 drivers/rtc/Kconfig      |   7 +
 drivers/rtc/Makefile     |   1 +
 drivers/rtc/rtc-cv1800.c | 406 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 414 insertions(+)
 create mode 100644 drivers/rtc/rtc-cv1800.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 1ea9c7600150..3633f45c7fa0 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1115,6 +1115,13 @@ config RTC_DRV_DS2404
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ds2404.
 
+config RTC_DRV_CV1800
+	tristate "Sophgo CV1800 RTC"
+	depends on ARCH_SOPHGO || COMPILE_TEST
+	help
+	  If you say Y here you will get support for the RTC found on
+	  CV1800
+
 config RTC_DRV_DA9052
 	tristate "Dialog DA9052/DA9053 RTC"
 	depends on PMIC_DA9052
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 31c4606fd9bf..a5fc78ac0094 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_RTC_DRV_CADENCE)	+= rtc-cadence.o
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
 obj-$(CONFIG_RTC_DRV_CPCAP)	+= rtc-cpcap.o
 obj-$(CONFIG_RTC_DRV_CROS_EC)	+= rtc-cros-ec.o
+obj-$(CONFIG_RTC_DRV_CV1800)	+= rtc-cv1800.o
 obj-$(CONFIG_RTC_DRV_DA9052)	+= rtc-da9052.o
 obj-$(CONFIG_RTC_DRV_DA9055)	+= rtc-da9055.o
 obj-$(CONFIG_RTC_DRV_DA9063)	+= rtc-da9063.o
diff --git a/drivers/rtc/rtc-cv1800.c b/drivers/rtc/rtc-cv1800.c
new file mode 100644
index 000000000000..fbf2e575ea94
--- /dev/null
+++ b/drivers/rtc/rtc-cv1800.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * rtc-cv1800.c: RTC driver for Sophgo cv1800 RTC
+ *
+ * Author: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+
+#define ANA_CALIB                   0x1000
+#define SEC_PULSE_GEN               0x1004
+#define ALARM_TIME                  0x1008
+#define ALARM_ENABLE                0x100C
+#define SET_SEC_CNTR_VAL            0x1010
+#define SET_SEC_CNTR_TRIG           0x1014
+#define SEC_CNTR_VAL                0x1018
+#define APB_RDATA_SEL               0x103C
+#define POR_DB_MAGIC_KEY            0x1068
+#define EN_PWR_WAKEUP               0x10BC
+
+/*
+ * When in VDDBKUP domain, this MACRO register
+ * does not power down
+ */
+#define MACRO_DA_CLEAR_ALL          0x1480
+#define MACRO_DA_SOC_READY          0x148C
+#define MACRO_RO_T                  0x14A8
+#define MACRO_RG_SET_T              0x1498
+#define CTRL                        0x08
+#define FC_COARSE_EN                0x40
+#define FC_COARSE_CAL               0x44
+#define FC_FINE_EN                  0x48
+#define FC_FINE_CAL                 0x50
+#define CTRL_MODE_MASK              BIT(10)
+#define CTRL_MODE_OSC32K            0x00UL
+#define CTRL_MODE_XTAL32K           BIT(0)
+#define FC_COARSE_CAL_VAL_SHIFT     0
+#define FC_COARSE_CAL_VAL_MASK      GENMASK(15, 0)
+#define FC_COARSE_CAL_TIME_SHIFT    16
+#define FC_COARSE_CAL_TIME_MASK     GENMASK(31, 16)
+#define FC_FINE_CAL_VAL_SHIFT       0
+#define FC_FINE_CAL_VAL_MASK        GENMASK(23, 0)
+#define FC_FINE_CAL_TIME_SHIFT      24
+#define FC_FINE_CAL_TIME_MASK       GENMASK(31, 24)
+#define SEC_PULSE_GEN_INT_SHIFT     0
+#define SEC_PULSE_GEN_INT_MASK      GENMASK(7, 0)
+#define SEC_PULSE_GEN_FRAC_SHIFT    8
+#define SEC_PULSE_GEN_FRAC_MASK     GENMASK(24, 8)
+#define SEC_PULSE_GEN_SEL_SHIFT     31
+#define SEC_PULSE_GEN_SEL_MASK      GENMASK(30, 0)
+#define SEC_PULSE_SEL_INNER         BIT(31)
+#define CALIB_INIT_VAL              (BIT(8) || BIT(16))
+#define CALIB_SEL_FTUNE_MASK        GENMASK(30, 0)
+#define CALIB_SEL_FTUNE_INNER       0x00UL
+#define CALIB_OFFSET_INIT           128
+#define CALIB_OFFSET_SHIFT          BIT(0)
+#define CALIB_FREQ                  256000000000
+#define CALIB_FRAC_EXT              10000
+#define CALIB_FREQ_NS               40
+#define CALIB_FREQ_MULT             256
+#define CALIB_FC_COARSE_PLUS_OFFSET 770
+#define CALIB_FC_COARSE_SUB_OFFSET  755
+#define REG_ENABLE_FUN              BIT(0)
+#define REG_DISABLE_FUN             0x00UL
+#define REG_INIT_TIMEOUT            100
+#define SEC_MAX_VAL                 0xFFFFFFFF
+#define ALARM_ENABLE_MASK           BIT(0)
+#define SET_SEC_CNTR_VAL_INIT       (BIT(28) || BIT(29))
+#define DEALY_TIME_PREPARE          400
+#define DEALY_TIME_LOOP             100
+
+struct cv1800_rtc_priv {
+	struct rtc_device *rtc_dev;
+	struct regmap *rtc_map;
+	struct clk *clk;
+	int irq;
+};
+
+static const struct regmap_config cv1800_rtc_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int cv1800_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct cv1800_rtc_priv *info = dev_get_drvdata(dev);
+
+	regmap_write(info->rtc_map, ALARM_ENABLE, enabled);
+
+	return 0;
+}
+
+static int cv1800_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct cv1800_rtc_priv *info = dev_get_drvdata(dev);
+	unsigned long alarm_time;
+
+	alarm_time = rtc_tm_to_time64(&alrm->time);
+
+	cv1800_rtc_alarm_irq_enable(dev, REG_DISABLE_FUN);
+
+	regmap_write(info->rtc_map, ALARM_TIME, alarm_time);
+
+	cv1800_rtc_alarm_irq_enable(dev, alrm->enabled);
+
+	return 0;
+}
+
+static int cv1800_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct cv1800_rtc_priv *info = dev_get_drvdata(dev);
+	uint32_t enabled;
+	uint32_t time;
+
+	regmap_read(info->rtc_map, ALARM_ENABLE, &enabled);
+
+	alarm->enabled = enabled & ALARM_ENABLE_MASK;
+
+	regmap_read(info->rtc_map, ALARM_TIME, &time);
+
+	rtc_time64_to_tm(time, &alarm->time);
+
+	return 0;
+}
+
+/**
+ * cv1800_rtc_32k_coarse_val_calib() - Using an external
+ * clock to coarse calibrate the crystal oscillator
+ * @info: the device of calibrated
+ *
+ * @return 0 on success, or -1 on fail
+ *
+ * This RTC has an independent 32KHz oscillator. However,
+ * the accuracy of this oscillator is easily affected by
+ * external environmental interference,resulting in lower
+ * accuracy than the internal oscillator.Therefore, a 25M
+ * crystal oscillator is used as a reference source to
+ * calibrate the RTC and improve its accuracy.Calibration
+ * is completed through two steps, namely rough calibration
+ * and fine calibration.
+ */
+static int cv1800_rtc_32k_coarse_val_calib(struct cv1800_rtc_priv *info)
+{
+	uint32_t calib_val = 0;
+	uint32_t coarse_val = 0;
+	uint32_t time_now = 0;
+	uint32_t time_next = 0;
+	uint32_t offset = CALIB_OFFSET_INIT;
+	uint32_t coarse_timeout = REG_INIT_TIMEOUT;
+	uint32_t get_val_timeout = 0;
+
+	regmap_write(info->rtc_map, ANA_CALIB, CALIB_INIT_VAL);
+
+	udelay(DEALY_TIME_PREPARE);
+
+	/* Select 32K OSC tuning val source from rtc_sys */
+	regmap_update_bits(info->rtc_map, SEC_PULSE_GEN,
+			   (unsigned int)(~SEC_PULSE_GEN_SEL_MASK),
+			   (unsigned int)(~SEC_PULSE_SEL_INNER));
+
+	regmap_read(info->rtc_map, ANA_CALIB, &calib_val);
+
+	regmap_write(info->rtc_map, FC_COARSE_EN, REG_ENABLE_FUN);
+
+	while (--coarse_timeout) {
+		regmap_read(info->rtc_map, FC_COARSE_CAL, &time_now);
+		time_now >>= FC_COARSE_CAL_TIME_SHIFT;
+
+		get_val_timeout = REG_INIT_TIMEOUT;
+
+		while (time_next <= time_now && --get_val_timeout) {
+			regmap_read(info->rtc_map, FC_COARSE_CAL, &time_next);
+			time_next >>= FC_COARSE_CAL_TIME_SHIFT;
+			udelay(DEALY_TIME_LOOP);
+		}
+
+		if (!get_val_timeout)
+			return -1;
+
+		udelay(DEALY_TIME_PREPARE);
+
+		regmap_read(info->rtc_map, FC_COARSE_CAL, &coarse_val);
+		coarse_val &= FC_COARSE_CAL_VAL_MASK;
+
+		if (coarse_val > CALIB_FC_COARSE_PLUS_OFFSET) {
+			calib_val += offset;
+			offset >>= CALIB_OFFSET_SHIFT;
+			regmap_write(info->rtc_map, ANA_CALIB, calib_val);
+		} else if (coarse_val < CALIB_FC_COARSE_SUB_OFFSET) {
+			calib_val -= offset;
+			offset >>= CALIB_OFFSET_SHIFT;
+			regmap_write(info->rtc_map, ANA_CALIB, calib_val);
+		} else {
+			regmap_write(info->rtc_map, FC_COARSE_EN,
+				     REG_DISABLE_FUN);
+			break;
+		}
+
+		if (offset == 0)
+			return -1;
+	}
+
+	return 0;
+}
+
+static int cv1800_rtc_32k_fine_val_calib(struct cv1800_rtc_priv *info)
+{
+	uint32_t val;
+	uint64_t freq = CALIB_FREQ;
+	uint32_t sec_cnt;
+	uint32_t timeout = REG_INIT_TIMEOUT;
+	uint32_t time_now = 0;
+	uint32_t time_next = 0;
+
+	regmap_write(info->rtc_map, FC_FINE_EN, REG_ENABLE_FUN);
+
+	regmap_read(info->rtc_map, FC_FINE_CAL, &time_now);
+	time_now >>= FC_FINE_CAL_TIME_SHIFT;
+
+	while (time_next <= time_now && --timeout) {
+		regmap_read(info->rtc_map, FC_FINE_CAL, &time_next);
+		time_next >>= FC_FINE_CAL_TIME_SHIFT;
+		udelay(DEALY_TIME_LOOP);
+	}
+
+	if (!timeout)
+		return -1;
+
+	regmap_read(info->rtc_map, FC_FINE_CAL, &val);
+	val &= FC_FINE_CAL_VAL_MASK;
+
+	do_div(freq, CALIB_FREQ_NS);
+	freq = freq * CALIB_FRAC_EXT;
+	do_div(freq, val);
+
+	sec_cnt = ((do_div(freq, CALIB_FRAC_EXT) * CALIB_FREQ_MULT) /
+			   CALIB_FRAC_EXT &
+		   SEC_PULSE_GEN_INT_MASK) +
+		  (freq << SEC_PULSE_GEN_FRAC_SHIFT);
+
+	regmap_write(info->rtc_map, SEC_PULSE_GEN, sec_cnt);
+	regmap_write(info->rtc_map, FC_FINE_EN, REG_DISABLE_FUN);
+
+	return 0;
+}
+
+static void rtc_enable_sec_counter(struct cv1800_rtc_priv *info)
+{
+	unsigned int sec_ro_t;
+	unsigned int sec;
+
+	/* select inner sec pulse and select reg set calibration val */
+	regmap_update_bits(info->rtc_map, SEC_PULSE_GEN,
+			   (unsigned int)(~SEC_PULSE_GEN_SEL_MASK),
+			   (unsigned int)(~SEC_PULSE_SEL_INNER));
+
+	regmap_update_bits(info->rtc_map, ANA_CALIB,
+			   (unsigned int)(~CALIB_SEL_FTUNE_MASK),
+			   CALIB_SEL_FTUNE_INNER);
+
+	sec = SET_SEC_CNTR_VAL_INIT;
+
+	/* load from MACRO register */
+	regmap_read(info->rtc_map, MACRO_RO_T, &sec_ro_t);
+	if (sec_ro_t > (SET_SEC_CNTR_VAL_INIT))
+		sec = sec_ro_t;
+
+	regmap_write(info->rtc_map, SET_SEC_CNTR_VAL, sec);
+	regmap_write(info->rtc_map, SET_SEC_CNTR_TRIG, REG_ENABLE_FUN);
+}
+
+static int cv1800_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct cv1800_rtc_priv *info = dev_get_drvdata(dev);
+	unsigned int sec;
+
+	regmap_read(info->rtc_map, SEC_CNTR_VAL, &sec);
+
+	rtc_time64_to_tm(sec, tm);
+
+	return 0;
+}
+
+static int cv1800_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct cv1800_rtc_priv *info = dev_get_drvdata(dev);
+	unsigned long sec;
+
+	sec = rtc_tm_to_time64(tm);
+
+	regmap_write(info->rtc_map, SET_SEC_CNTR_VAL, sec);
+	regmap_write(info->rtc_map, SET_SEC_CNTR_TRIG, REG_ENABLE_FUN);
+
+	regmap_write(info->rtc_map, MACRO_RG_SET_T, sec);
+
+	return 0;
+}
+
+static irqreturn_t cv1800_rtc_irq_handler(int irq, void *dev_id)
+{
+	struct rtc_device *rtc = dev_id;
+
+	rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops cv1800_rtc_ops = {
+	.read_time = cv1800_rtc_read_time,
+	.set_time = cv1800_rtc_set_time,
+	.read_alarm = cv1800_rtc_read_alarm,
+	.set_alarm = cv1800_rtc_set_alarm,
+	.alarm_irq_enable = cv1800_rtc_alarm_irq_enable,
+};
+
+static int cv1800_rtc_probe(struct platform_device *pdev)
+{
+	struct cv1800_rtc_priv *rtc;
+	uint32_t ctrl_val;
+	void __iomem *base;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct cv1800_rtc_priv),
+			   GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	rtc->rtc_map =
+		devm_regmap_init_mmio(&pdev->dev, base, &cv1800_rtc_regmap_config);
+	if (IS_ERR(rtc->rtc_map))
+		return PTR_ERR(rtc->rtc_map);
+
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0)
+		return rtc->irq;
+
+	ret = devm_request_irq(&pdev->dev, rtc->irq, cv1800_rtc_irq_handler,
+			       IRQF_TRIGGER_HIGH, "alarm", &pdev->dev);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "cannot register interrupt handler\n");
+
+	rtc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(rtc->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rtc->clk),
+				     "clk not found\n");
+
+	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->rtc_dev->ops = &cv1800_rtc_ops;
+	rtc->rtc_dev->range_max = U32_MAX;
+
+	/* if use internal clk,so coarse calibrate rtc */
+	regmap_read(rtc->rtc_map, CTRL, &ctrl_val);
+	ctrl_val &= CTRL_MODE_MASK;
+
+	if (ctrl_val == CTRL_MODE_OSC32K) {
+		ret = cv1800_rtc_32k_coarse_val_calib(rtc);
+		if (ret)
+			dev_err(&pdev->dev, "failed to coarse RTC val !\n");
+
+		ret = cv1800_rtc_32k_fine_val_calib(rtc);
+		if (ret)
+			dev_err(&pdev->dev, "failed to fine RTC val !\n");
+
+		rtc_enable_sec_counter(rtc);
+	}
+
+	return devm_rtc_register_device(rtc->rtc_dev);
+}
+
+static const struct of_device_id cv1800_dt_ids[] = {
+	{ .compatible = "sophgo,cv1800-rtc" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, cv1800_dt_ids);
+
+static struct platform_driver cv1800_rtc_driver = {
+	.driver = {
+		.name = "sophgo-cv1800-rtc",
+		.of_match_table = cv1800_dt_ids,
+	},
+	.probe = cv1800_rtc_probe,
+};
+
+module_platform_driver(cv1800_rtc_driver);
+MODULE_AUTHOR("Jingbao Qiu");
+MODULE_DESCRIPTION("Sophgo cv1800 RTC Driver");
+MODULE_LICENSE("GPL");
-- 
2.43.0

[PATCH v7 3/3] riscv: dts: sophgo: add rtc dt node for CV1800

[Jingbao Qiu]

Add the rtc device tree node to cv1800 SoC.

Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
---
 arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
index df40e87ee063..0cd7eb9a3048 100644
--- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
@@ -119,5 +119,12 @@ clint: timer@74000000 {
 			reg = <0x74000000 0x10000>;
 			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
 		};
+
+		rtc: rtc@5025000 {
+			compatible = "sophgo,cv1800-rtc";
+			reg = <0x5025000 0x2000>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+		};
 	};
 };
-- 
2.43.0

Re: [PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[Alexandre Belloni]

On 22/01/2024 16:06:30+0800, Jingbao Qiu wrote:
> Implement the RTC driver for CV1800, which able to provide time alarm
> and calibrate functionality.
> 
> Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> ---
> 
> Depends on https://lore.kernel.org/all/IA1PR20MB4953C774D41EDF1EADB6EC18BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com/

What is the dependency?


Also, please fix the checkpatch.pl --strict warnings

> +/**
> + * cv1800_rtc_32k_coarse_val_calib() - Using an external
> + * clock to coarse calibrate the crystal oscillator
> + * @info: the device of calibrated
> + *
> + * @return 0 on success, or -1 on fail
> + *
> + * This RTC has an independent 32KHz oscillator. However,
> + * the accuracy of this oscillator is easily affected by
> + * external environmental interference,resulting in lower
> + * accuracy than the internal oscillator.Therefore, a 25M
> + * crystal oscillator is used as a reference source to
> + * calibrate the RTC and improve its accuracy.Calibration
> + * is completed through two steps, namely rough calibration
> + * and fine calibration.
> + */
> +static int cv1800_rtc_32k_coarse_val_calib(struct cv1800_rtc_priv *info)

This is still not working as well as you think it is. You should
Implement the offset callbacks instead.


-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[Krzysztof Kozlowski]

On 22/01/2024 09:06, Jingbao Qiu wrote:
> Implement the RTC driver for CV1800, which able to provide time alarm
> and calibrate functionality.
> 
> Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> ---
> 
> Depends on https://lore.kernel.org/all/IA1PR20MB4953C774D41EDF1EADB6EC18BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com/
> 

Why?

How could a RTC driver depend on clock driver or clock bindings? This
looks wrong and it prevents your driver being merged via easy path.

> diff --git a/drivers/rtc/rtc-cv1800.c b/drivers/rtc/rtc-cv1800.c
> new file mode 100644
> index 000000000000..fbf2e575ea94
> --- /dev/null
> +++ b/drivers/rtc/rtc-cv1800.c
> @@ -0,0 +1,406 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * rtc-cv1800.c: RTC driver for Sophgo cv1800 RTC
> + *
> + * Author: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> + */
> +#include <linux/kernel.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/irq.h>
> +#include <linux/delay.h>
> +#include <linux/rtc.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/syscon.h>

Drop

> +#include <linux/regmap.h>
> +#include <linux/of.h>

Keep the includes sorted, prefferably alphabetically.

...

> +
> +static int cv1800_rtc_probe(struct platform_device *pdev)
> +{
> +	struct cv1800_rtc_priv *rtc;
> +	uint32_t ctrl_val;
> +	void __iomem *base;
> +	int ret;
> +
> +	rtc = devm_kzalloc(&pdev->dev, sizeof(struct cv1800_rtc_priv),

sizeof(*)

> +			   GFP_KERNEL);
> +	if (!rtc)
> +		return -ENOMEM;
> +
> +	base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	rtc->rtc_map =

Unneeded blank line. Don't wrap at =.

> +		devm_regmap_init_mmio(&pdev->dev, base, &cv1800_rtc_regmap_config);
> +	if (IS_ERR(rtc->rtc_map))
> +		return PTR_ERR(rtc->rtc_map);
> +
> +	rtc->irq = platform_get_irq(pdev, 0);
> +	if (rtc->irq < 0)
> +		return rtc->irq;
> +
> +	ret = devm_request_irq(&pdev->dev, rtc->irq, cv1800_rtc_irq_handler,
> +			       IRQF_TRIGGER_HIGH, "alarm", &pdev->dev);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "cannot register interrupt handler\n");
> +
> +	rtc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
> +	if (IS_ERR(rtc->clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(rtc->clk),
> +				     "clk not found\n");
> +
> +	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
> +	if (IS_ERR(rtc->rtc_dev))
> +		return PTR_ERR(rtc->rtc_dev);
> +
> +	platform_set_drvdata(pdev, rtc);
> +
> +	rtc->rtc_dev->ops = &cv1800_rtc_ops;
> +	rtc->rtc_dev->range_max = U32_MAX;
> +
> +	/* if use internal clk,so coarse calibrate rtc */
> +	regmap_read(rtc->rtc_map, CTRL, &ctrl_val);
> +	ctrl_val &= CTRL_MODE_MASK;


Best regards,
Krzysztof

Re: [PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[Jingbao Qiu]

On Mon, Jan 22, 2024 at 4:17 PM Alexandre Belloni
<alexandre.belloni@bootlin.com> wrote:
>
> On 22/01/2024 16:06:30+0800, Jingbao Qiu wrote:
> > Implement the RTC driver for CV1800, which able to provide time alarm
> > and calibrate functionality.
> >
> > Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> > ---
> >
> > Depends on https://lore.kernel.org/all/IA1PR20MB4953C774D41EDF1EADB6EC18BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com/
>
> What is the dependency?
>

Thank you, this driver requires support from the CLK driver.
I will add an explanation in the next version.

>
> Also, please fix the checkpatch.pl --strict warnings

I will use the -- strict option for testing.

>
> > +/**
> > + * cv1800_rtc_32k_coarse_val_calib() - Using an external
> > + * clock to coarse calibrate the crystal oscillator
> > + * @info: the device of calibrated
> > + *
> > + * @return 0 on success, or -1 on fail
> > + *
> > + * This RTC has an independent 32KHz oscillator. However,
> > + * the accuracy of this oscillator is easily affected by
> > + * external environmental interference,resulting in lower
> > + * accuracy than the internal oscillator.Therefore, a 25M
> > + * crystal oscillator is used as a reference source to
> > + * calibrate the RTC and improve its accuracy.Calibration
> > + * is completed through two steps, namely rough calibration
> > + * and fine calibration.
> > + */
> > +static int cv1800_rtc_32k_coarse_val_calib(struct cv1800_rtc_priv *info)
>
> This is still not working as well as you think it is. You should
> Implement the offset callbacks instead.
>
I'm sorry, I don't quite understand offset callbacks.
Do you mean that this function needs to be executed periodically.

Best regards,
Jingbao Qiu

Re: [PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[Krzysztof Kozlowski]

On 22/01/2024 09:34, Jingbao Qiu wrote:
> On Mon, Jan 22, 2024 at 4:17 PM Alexandre Belloni
> <alexandre.belloni@bootlin.com> wrote:
>>
>> On 22/01/2024 16:06:30+0800, Jingbao Qiu wrote:
>>> Implement the RTC driver for CV1800, which able to provide time alarm
>>> and calibrate functionality.
>>>
>>> Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
>>> ---
>>>
>>> Depends on https://lore.kernel.org/all/IA1PR20MB4953C774D41EDF1EADB6EC18BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com/
>>
>> What is the dependency?
>>
> 
> Thank you, this driver requires support from the CLK driver.

How? This is really unusual. Just to remind: we talk about build
dependencies. Other do not matter for new drivers, right? Otherwise what
is being broken and how it could be even broken?


Best regards,
Krzysztof

Re: [PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[Jingbao Qiu]

On Mon, Jan 22, 2024 at 4:29 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 22/01/2024 09:06, Jingbao Qiu wrote:
> > Implement the RTC driver for CV1800, which able to provide time alarm
> > and calibrate functionality.
> >
> > Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> > ---
> >
> > Depends on https://lore.kernel.org/all/IA1PR20MB4953C774D41EDF1EADB6EC18BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com/
> >
>
> Why?
>
> How could a RTC driver depend on clock driver or clock bindings? This
> looks wrong and it prevents your driver being merged via easy path.

Thanks,I will fix it.

>
> > diff --git a/drivers/rtc/rtc-cv1800.c b/drivers/rtc/rtc-cv1800.c
> > new file mode 100644
> > index 000000000000..fbf2e575ea94
> > --- /dev/null
> > +++ b/drivers/rtc/rtc-cv1800.c
> > @@ -0,0 +1,406 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * rtc-cv1800.c: RTC driver for Sophgo cv1800 RTC
> > + *
> > + * Author: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> > + */
> > +#include <linux/kernel.h>
> > +#include <linux/clk.h>
> > +#include <linux/module.h>
> > +#include <linux/irq.h>
> > +#include <linux/delay.h>
> > +#include <linux/rtc.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/mfd/syscon.h>
>
> Drop

Thanks, I will do that.

>
> > +#include <linux/regmap.h>
> > +#include <linux/of.h>
>
> Keep the includes sorted, prefferably alphabetically.

Thank you for your suggestion.I will do that.

>
> ...
>
> > +
> > +static int cv1800_rtc_probe(struct platform_device *pdev)
> > +{
> > +     struct cv1800_rtc_priv *rtc;
> > +     uint32_t ctrl_val;
> > +     void __iomem *base;
> > +     int ret;
> > +
> > +     rtc = devm_kzalloc(&pdev->dev, sizeof(struct cv1800_rtc_priv),
>
> sizeof(*)

I will do that.

>
> > +                        GFP_KERNEL);
> > +     if (!rtc)
> > +             return -ENOMEM;
> > +
> > +     base = devm_platform_ioremap_resource(pdev, 0);
> > +     if (IS_ERR(base))
> > +             return PTR_ERR(base);
> > +
> > +     rtc->rtc_map =
>
> Unneeded blank line. Don't wrap at =.

Thanks, I will do that.

Best regards,
Jingbao QIu

Re: [PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[Jingbao Qiu]

On Mon, Jan 22, 2024 at 4:37 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 22/01/2024 09:34, Jingbao Qiu wrote:
> > On Mon, Jan 22, 2024 at 4:17 PM Alexandre Belloni
> > <alexandre.belloni@bootlin.com> wrote:
> >>
> >> On 22/01/2024 16:06:30+0800, Jingbao Qiu wrote:
> >>> Implement the RTC driver for CV1800, which able to provide time alarm
> >>> and calibrate functionality.
> >>>
> >>> Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> >>> ---
> >>>
> >>> Depends on https://lore.kernel.org/all/IA1PR20MB4953C774D41EDF1EADB6EC18BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com/
> >>
> >> What is the dependency?
> >>
> >
> > Thank you, this driver requires support from the CLK driver.
>
> How? This is really unusual. Just to remind: we talk about build
> dependencies. Other do not matter for new drivers, right? Otherwise what
> is being broken and how it could be even broken?
>
yes, you're right. This is wrong, I will drop it.

Best regards,
Jingbao Qiu

Re: [PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[Alexandre Belloni]

On 22/01/2024 16:34:00+0800, Jingbao Qiu wrote:
> On Mon, Jan 22, 2024 at 4:17 PM Alexandre Belloni
> <alexandre.belloni@bootlin.com> wrote:
> >
> > On 22/01/2024 16:06:30+0800, Jingbao Qiu wrote:
> > > Implement the RTC driver for CV1800, which able to provide time alarm
> > > and calibrate functionality.
> > >
> > > Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> > > ---
> > >
> > > Depends on https://lore.kernel.org/all/IA1PR20MB4953C774D41EDF1EADB6EC18BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com/
> >
> > What is the dependency?
> >
> 
> Thank you, this driver requires support from the CLK driver.
> I will add an explanation in the next version.
> 
> >
> > Also, please fix the checkpatch.pl --strict warnings
> 
> I will use the -- strict option for testing.
> 
> >
> > > +/**
> > > + * cv1800_rtc_32k_coarse_val_calib() - Using an external
> > > + * clock to coarse calibrate the crystal oscillator
> > > + * @info: the device of calibrated
> > > + *
> > > + * @return 0 on success, or -1 on fail
> > > + *
> > > + * This RTC has an independent 32KHz oscillator. However,
> > > + * the accuracy of this oscillator is easily affected by
> > > + * external environmental interference,resulting in lower
> > > + * accuracy than the internal oscillator.Therefore, a 25M
> > > + * crystal oscillator is used as a reference source to
> > > + * calibrate the RTC and improve its accuracy.Calibration
> > > + * is completed through two steps, namely rough calibration
> > > + * and fine calibration.
> > > + */
> > > +static int cv1800_rtc_32k_coarse_val_calib(struct cv1800_rtc_priv *info)
> >
> > This is still not working as well as you think it is. You should
> > Implement the offset callbacks instead.
> >
> I'm sorry, I don't quite understand offset callbacks.
> Do you mean that this function needs to be executed periodically.

I mean implement read_offset and set_offset here:
https://elixir.bootlin.com/linux/v6.7/source/include/linux/rtc.h#L67


-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v7 2/3] rtc: sophgo: add rtc support for Sophgo CV1800 SoC

[Jingbao Qiu]

On Mon, Jan 22, 2024 at 5:15 PM Alexandre Belloni
<alexandre.belloni@bootlin.com> wrote:
>
> On 22/01/2024 16:34:00+0800, Jingbao Qiu wrote:
> > On Mon, Jan 22, 2024 at 4:17 PM Alexandre Belloni
> > <alexandre.belloni@bootlin.com> wrote:
> > >
> > > On 22/01/2024 16:06:30+0800, Jingbao Qiu wrote:
> > > > Implement the RTC driver for CV1800, which able to provide time alarm
> > > > and calibrate functionality.
> > > >
> > > > Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> > > > ---
> > > >
> > > > Depends on https://lore.kernel.org/all/IA1PR20MB4953C774D41EDF1EADB6EC18BB6D2@IA1PR20MB4953.namprd20.prod.outlook.com/
> > >
> > > What is the dependency?
> > >
> >
> > Thank you, this driver requires support from the CLK driver.
> > I will add an explanation in the next version.
> >
> > >
> > > Also, please fix the checkpatch.pl --strict warnings
> >
> > I will use the -- strict option for testing.
> >
> > >
> > > > +/**
> > > > + * cv1800_rtc_32k_coarse_val_calib() - Using an external
> > > > + * clock to coarse calibrate the crystal oscillator
> > > > + * @info: the device of calibrated
> > > > + *
> > > > + * @return 0 on success, or -1 on fail
> > > > + *
> > > > + * This RTC has an independent 32KHz oscillator. However,
> > > > + * the accuracy of this oscillator is easily affected by
> > > > + * external environmental interference,resulting in lower
> > > > + * accuracy than the internal oscillator.Therefore, a 25M
> > > > + * crystal oscillator is used as a reference source to
> > > > + * calibrate the RTC and improve its accuracy.Calibration
> > > > + * is completed through two steps, namely rough calibration
> > > > + * and fine calibration.
> > > > + */
> > > > +static int cv1800_rtc_32k_coarse_val_calib(struct cv1800_rtc_priv *info)
> > >
> > > This is still not working as well as you think it is. You should
> > > Implement the offset callbacks instead.
> > >
> > I'm sorry, I don't quite understand offset callbacks.
> > Do you mean that this function needs to be executed periodically.
>
> I mean implement read_offset and set_offset here:
> https://elixir.bootlin.com/linux/v6.7/source/include/linux/rtc.h#L67
>

Thank you for your patient reply.
I will do that.

Best regards,
Jingbao Qiu

Re: [PATCH v7 3/3] riscv: dts: sophgo: add rtc dt node for CV1800

[Emil Renner Berthing]

Jingbao Qiu wrote:
> Add the rtc device tree node to cv1800 SoC.
>
> Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> ---
>  arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> index df40e87ee063..0cd7eb9a3048 100644
> --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> @@ -119,5 +119,12 @@ clint: timer@74000000 {
>  			reg = <0x74000000 0x10000>;
>  			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
>  		};
> +
> +		rtc: rtc@5025000 {
> +			compatible = "sophgo,cv1800-rtc";
> +			reg = <0x5025000 0x2000>;
> +			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&osc>;
> +		};

Before this patch it looks like the nodes are sorted by their address,
but this would break it.

>  	};
>  };
> --
> 2.43.0
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v7 3/3] riscv: dts: sophgo: add rtc dt node for CV1800

[Jingbao Qiu]

On Mon, Jan 22, 2024 at 9:25 PM Emil Renner Berthing
<emil.renner.berthing@canonical.com> wrote:
>
> Jingbao Qiu wrote:
> > Add the rtc device tree node to cv1800 SoC.
> >
> > Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
> > ---
> >  arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> > index df40e87ee063..0cd7eb9a3048 100644
> > --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> > +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> > @@ -119,5 +119,12 @@ clint: timer@74000000 {
> >                       reg = <0x74000000 0x10000>;
> >                       interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
> >               };
> > +
> > +             rtc: rtc@5025000 {
> > +                     compatible = "sophgo,cv1800-rtc";
> > +                     reg = <0x5025000 0x2000>;
> > +                     interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
> > +                     clocks = <&osc>;
> > +             };
>
> Before this patch it looks like the nodes are sorted by their address,
> but this would break it.

Thanks, I will fix it.

Best regards,
Jingbao Qiu