From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Zhang Rui <rui.zhang@intel.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"matthew.garrett@nebula.com" <matthew.garrett@nebula.com>,
"dmitry.torokhov@gmail.com" <dmitry.torokhov@gmail.com>
Subject: Re: [RFC PATCH 6/8] ACPI: use platform bus as the default bus for _HID enumeration
Date: Sun, 09 Mar 2014 18:50:13 +0100 [thread overview]
Message-ID: <5180657.oM3SbsRfFK@vostro.rjw.lan> (raw)
In-Reply-To: <1394343207.10143.2.camel@rzhang1-mobl4>
On Sunday, March 09, 2014 01:33:27 PM Zhang Rui wrote:
> On Fri, 2014-03-07 at 02:46 +0100, Rafael J. Wysocki wrote:
> > On Tuesday, March 04, 2014 01:35:00 AM Rafael J. Wysocki wrote:
> > > On 3/4/2014 1:27 AM, Zhang, Rui wrote:
> > > >
> > > >> -----Original Message-----
> > > >> From: Rafael J. Wysocki [mailto:rjw@rjwysocki.net]
> > > >> Sent: Tuesday, March 04, 2014 7:23 AM
> > > >> To: Zhang, Rui
> > > >> Cc: linux-acpi@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > >> bhelgaas@google.com; matthew.garrett@nebula.com; Wysocki, Rafael J;
> > > >> dmitry.torokhov@gmail.com
> > > >> Subject: Re: [RFC PATCH 6/8] ACPI: use platform bus as the default bus
> > > >> for _HID enumeration
> > > >> Importance: High
> > > >>
> > > >> On Monday, March 03, 2014 10:11:48 PM Zhang Rui wrote:
> > > >>> On Mon, 2014-03-03 at 00:51 +0100, Rafael J. Wysocki wrote:
> > > >>>> On Wednesday, February 26, 2014 05:11:12 PM Zhang Rui wrote:
> > > >>>>> Because of the growing demand for enumerating ACPI devices to
> > > >>>>> platform bus, this patch changes the code to enumerate ACPI
> > > >>>>> devices with _HID/_CID to platform bus by default, unless the
> > > >> device already has a scan handler attached.
> > > >>>>> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
> > > >>>>> ---
> > > >>>>> drivers/acpi/acpi_platform.c | 28 ----------------------------
> > > >>>>> drivers/acpi/scan.c | 12 ++++++------
> > > >>>>> 2 files changed, 6 insertions(+), 34 deletions(-)
> > > >>>>>
> > > >>>>> diff --git a/drivers/acpi/acpi_platform.c
> > > >>>>> b/drivers/acpi/acpi_platform.c index dbfe49e..33376a9 100644
> > > >>>>> --- a/drivers/acpi/acpi_platform.c
> > > >>>>> +++ b/drivers/acpi/acpi_platform.c
> > > >>>>> @@ -22,24 +22,6 @@
> > > >>>>>
> > > >>>>> ACPI_MODULE_NAME("platform");
> > > >>>>>
> > > >>>>> -/*
> > > >>>>> - * The following ACPI IDs are known to be suitable for
> > > >>>>> representing as
> > > >>>>> - * platform devices.
> > > >>>>> - */
> > > >>>>> -static const struct acpi_device_id acpi_platform_device_ids[] =
> > > >> {
> > > >>>>> -
> > > >>>>> - { "PNP0D40" },
> > > >>>>> - { "ACPI0003" },
> > > >>>>> - { "VPC2004" },
> > > >>>>> - { "BCM4752" },
> > > >>>>> -
> > > >>>>> - /* Intel Smart Sound Technology */
> > > >>>>> - { "INT33C8" },
> > > >>>>> - { "80860F28" },
> > > >>>>> -
> > > >>>>> - { }
> > > >>>>> -};
> > > >>>>> -
> > > >>>>> /**
> > > >>>>> * acpi_create_platform_device - Create platform device for ACPI
> > > >> device node
> > > >>>>> * @adev: ACPI device node to create a platform device for.
> > > >>>>> @@ -125,13 +107,3 @@ int acpi_create_platform_device(struct
> > > >> acpi_device *adev,
> > > >>>>> kfree(resources);
> > > >>>>> return 1;
> > > >>>>> }
> > > >>>>> -
> > > >>>>> -static struct acpi_scan_handler platform_handler = {
> > > >>>>> - .ids = acpi_platform_device_ids,
> > > >>>>> - .attach = acpi_create_platform_device,
> > > >>>>> -};
> > > >>>>> -
> > > >>>>> -void __init acpi_platform_init(void) -{
> > > >>>>> - acpi_scan_add_handler(&platform_handler);
> > > >>>>> -}
> > > >>>>> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index
> > > >>>>> 5967338..61af32e 100644
> > > >>>>> --- a/drivers/acpi/scan.c
> > > >>>>> +++ b/drivers/acpi/scan.c
> > > >>>>> @@ -2022,14 +2022,15 @@ static int
> > > >> acpi_scan_attach_handler(struct acpi_device *device)
> > > >>>>> handler = acpi_scan_match_handler(hwid->id, &devid);
> > > >>>>> if (handler) {
> > > >>>>> ret = handler->attach(device, devid);
> > > >>>>> - if (ret > 0) {
> > > >>>>> + if (ret > 0)
> > > >>>>> device->handler = handler;
> > > >>>>> - break;
> > > >>>>> - } else if (ret < 0) {
> > > >>>>> - break;
> > > >>>>> - }
> > > >>>>> + if (ret)
> > > >>>>> + goto end;
> > > >>>>> }
> > > >>>>> }
> > > >>>>> +end:
> > > >>>>> + if (!list_empty(&device->pnp.ids) && !device->handler)
> > > >>>> I'm a bit concerned that this check will create platform devices
> > > >> for
> > > >>>> too many ACPI device objects.
> > > >>> agreed. there are some devices created unexpected by this patch, e.g.
> > > >>> on my test machine, I can see
> > > >>>
> > > >>> /sys/bus/platform/devices/LNXSYSTM:00 (ACPI system bus/root node)
> > > >>> /sys/bus/platform/devices/PNP0000:00 (PIC)
> > > >>> /sys/bus/platform/devices/PNP0100:00 (system timer?)
> > > >>>
> > > >>>> Shouldn't we require that _HID or at least _CID is present for
> > > >>>> that?
> > > >>>>
> > > >>> I do not think so.
> > > >>> only devices that invoke acpi_add_ids() may have pnp.ids but no
> > > >>> _HID/_CID, right?
> > > >>> I did a check in the code, those devices include:
> > > >> Well, I did that too.
> > > >>
> > > >>> ACPI root node
> > > >>> ACPI video
> > > >>> ACPI bay
> > > >>> ACPI dock
> > > >>> IBM SMBus
> > > >>> ACPI Power resource
> > > >>> ACPI processor
> > > >>> ACPI thermal
> > > >>> ACPI fixed power/sleep button
> > > >>>
> > > >>> IMO, only the ACPI root node, ACPI power resource, possibly ACPI
> > > >>> processor are the ones that we do not want to see in platform bus.
> > > >> No, we don't want any of them. So pretty much as I said, only if
> > > >> _HID/_CID is present, please?
> > > >>
> > > > Why? We will convert the drivers for most of those devices from ACPI bus to platform bus sooner or later.
> > > > We need to see them in platform bus...
> > >
> > > No, we don't.
> > >
> > > I'm not sure about IBM SMBus to be honest, but as for the rest:
> > >
> > > Why would we want one for the ACPI root?
> > >
> > > And for video? Those things are PCI usually devices anyway and we just
> > > add "artificial" HIDs for them.
> > >
> > > ACPI docks and bays are handled by the dock driver which creates
> > > platform devices for them already if needed and we don't want duplicates
> > > there.
> > >
> > > ACPI processor has its own scan handler that binds those objects to
> > > system devices.
> > >
> > > Power resources - no need.
> > >
> > > Do we need platform devices for ACPI thermal zones?
> > >
> > > Yes, we will need them for fixed buttons, but that's a special case anyway.
> >
> > So, why don't we add an ACPI device object flag, say hid_device, such that if
> > set, the ACPI core will create a struct platform device for that device object.
> > Then, we can set hid_device for buttons and other stuff we care about.
> >
> agreed. I will do this in next version.
> But anyway, the exclude list is still needed for the _HID devices that
> we do not want to see in platform, e.g.
> /sys/bus/platform/devices/PNP0000:00 (PIC)
> /sys/bus/platform/devices/PNP0100:00 (system timer?)
I see.
OK
Rafael
next prev parent reply other threads:[~2014-03-09 17:34 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-26 9:11 [RFC PATCH 0/8] ACPI: change the way of enumerating PNPACPI/Platform devices Zhang Rui
2014-02-26 9:11 ` [RFC PATCH 1/8] ACPI: introduce .match() callback for ACPI scan handler Zhang Rui
2014-02-26 9:11 ` [RFC PATCH 2/8] PNPACPI: use whilte list for pnpacpi device enumeration Zhang Rui
2014-03-07 1:44 ` Rafael J. Wysocki
2014-03-09 5:29 ` Zhang Rui
2014-03-09 17:49 ` Rafael J. Wysocki
2014-03-10 2:24 ` Zhang Rui
2014-02-26 9:11 ` [RFC PATCH 3/8] PNPACPI: remove ids that does not comply with the ACPI PNP id rule Zhang Rui
2014-02-26 9:11 ` [RFC PATCH 4/8] PNPACPI: remove unsupported serial PNP ids from PNPACPI id list Zhang Rui
2014-02-26 9:11 ` [RFC PATCH 5/8] PNPACPI: check and enumerate CMOS RTC devices explicitly Zhang Rui
2014-02-26 9:11 ` [RFC PATCH 6/8] ACPI: use platform bus as the default bus for _HID enumeration Zhang Rui
2014-03-02 23:51 ` Rafael J. Wysocki
2014-03-03 14:11 ` Zhang Rui
2014-03-03 23:23 ` Rafael J. Wysocki
2014-03-04 0:27 ` Zhang, Rui
2014-03-04 0:35 ` Rafael J. Wysocki
2014-03-07 1:46 ` Rafael J. Wysocki
2014-03-09 5:33 ` Zhang Rui
2014-03-09 17:50 ` Rafael J. Wysocki [this message]
2014-03-09 15:50 ` Zhang Rui
2014-03-09 18:04 ` Rafael J. Wysocki
2014-03-10 2:44 ` Zhang Rui
2014-03-10 2:45 ` Zhang Rui
2014-02-26 9:11 ` [RFC PATCH 7/8] Revert "ACPI / PNP: skip ACPI device nodes associated with physical nodes already" Zhang Rui
2014-02-26 9:11 ` [RFC PATCH 8/8] PNPACPI: create both PNP and Platform device nodes for PNP0C01/PNP0C02 Zhang Rui
2014-03-03 14:17 ` Zhang Rui
2014-03-03 16:17 ` Bjorn Helgaas
2014-02-26 16:47 ` [RFC PATCH 0/8] ACPI: change the way of enumerating PNPACPI/Platform devices Matthew Garrett
2014-03-03 13:50 ` Zhang Rui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5180657.oM3SbsRfFK@vostro.rjw.lan \
--to=rjw@rjwysocki.net \
--cc=bhelgaas@google.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matthew.garrett@nebula.com \
--cc=rafael.j.wysocki@intel.com \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).