linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Claudiu.Beznea@microchip.com>
To: <alexandre.belloni@bootlin.com>
Cc: <mturquette@baylibre.com>, <sboyd@kernel.org>,
	<Nicolas.Ferre@microchip.com>, <Ludovic.Desroches@microchip.com>,
	<bbrezillon@kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-clk@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 10/19] clk: at91: replace conditional operator with double logical not
Date: Mon, 20 Jul 2020 10:36:25 +0000	[thread overview]
Message-ID: <65c18837-7452-f970-e777-11929dbf8975@microchip.com> (raw)
In-Reply-To: <20200717150744.GU3428@piout.net>



On 17.07.2020 18:07, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hi,
> 
> On 15/07/2020 14:24:18+0300, Claudiu Beznea wrote:
>> Replace conditional operator with double logical not.
> 
> I think you need to elaborate why you do it as the generated
> instructions are exactly the same.

I don't have strong support for this one. In general I'm seeing
the usage of !! instead of ?: for 0 and 1 results as being simpler
in terms of code reading.

> 
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>  drivers/clk/at91/clk-generated.c  | 2 +-
>>  drivers/clk/at91/clk-main.c       | 6 +++---
>>  drivers/clk/at91/clk-master.c     | 2 +-
>>  drivers/clk/at91/clk-peripheral.c | 2 +-
>>  drivers/clk/at91/clk-system.c     | 4 ++--
>>  5 files changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
>> index f8e557e0e1b8..2448bdc63425 100644
>> --- a/drivers/clk/at91/clk-generated.c
>> +++ b/drivers/clk/at91/clk-generated.c
>> @@ -83,7 +83,7 @@ static int clk_generated_is_enabled(struct clk_hw *hw)
>>       regmap_read(gck->regmap, gck->layout->offset, &status);
>>       spin_unlock_irqrestore(gck->lock, flags);
>>
>> -     return status & AT91_PMC_PCR_GCKEN ? 1 : 0;
>> +     return !!(status & AT91_PMC_PCR_GCKEN);
>>  }
>>
>>  static unsigned long
>> diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
>> index 37c22667e831..5c83e899084f 100644
>> --- a/drivers/clk/at91/clk-main.c
>> +++ b/drivers/clk/at91/clk-main.c
>> @@ -175,7 +175,7 @@ static bool clk_main_rc_osc_ready(struct regmap *regmap)
>>
>>       regmap_read(regmap, AT91_PMC_SR, &status);
>>
>> -     return status & AT91_PMC_MOSCRCS;
>> +     return !!(status & AT91_PMC_MOSCRCS);
>>  }
>>
>>  static int clk_main_rc_osc_prepare(struct clk_hw *hw)
>> @@ -336,7 +336,7 @@ static int clk_rm9200_main_is_prepared(struct clk_hw *hw)
>>
>>       regmap_read(clkmain->regmap, AT91_CKGR_MCFR, &status);
>>
>> -     return status & AT91_PMC_MAINRDY ? 1 : 0;
>> +     return !!(status & AT91_PMC_MAINRDY);
>>  }
>>
>>  static unsigned long clk_rm9200_main_recalc_rate(struct clk_hw *hw,
>> @@ -398,7 +398,7 @@ static inline bool clk_sam9x5_main_ready(struct regmap *regmap)
>>
>>       regmap_read(regmap, AT91_PMC_SR, &status);
>>
>> -     return status & AT91_PMC_MOSCSELS ? 1 : 0;
>> +     return !!(status & AT91_PMC_MOSCSELS);
>>  }
>>
>>  static int clk_sam9x5_main_prepare(struct clk_hw *hw)
>> diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
>> index e7e0ba652de1..88d545b1698c 100644
>> --- a/drivers/clk/at91/clk-master.c
>> +++ b/drivers/clk/at91/clk-master.c
>> @@ -33,7 +33,7 @@ static inline bool clk_master_ready(struct regmap *regmap)
>>
>>       regmap_read(regmap, AT91_PMC_SR, &status);
>>
>> -     return status & AT91_PMC_MCKRDY ? 1 : 0;
>> +     return !!(status & AT91_PMC_MCKRDY);
>>  }
>>
>>  static int clk_master_prepare(struct clk_hw *hw)
>> diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
>> index c2ab4860a2bf..4c9a4147dfe5 100644
>> --- a/drivers/clk/at91/clk-peripheral.c
>> +++ b/drivers/clk/at91/clk-peripheral.c
>> @@ -208,7 +208,7 @@ static int clk_sam9x5_peripheral_is_enabled(struct clk_hw *hw)
>>       regmap_read(periph->regmap, periph->layout->offset, &status);
>>       spin_unlock_irqrestore(periph->lock, flags);
>>
>> -     return status & AT91_PMC_PCR_EN ? 1 : 0;
>> +     return !!(status & AT91_PMC_PCR_EN);
>>  }
>>
>>  static unsigned long
>> diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
>> index c4b3877aa445..f83ec0de86c3 100644
>> --- a/drivers/clk/at91/clk-system.c
>> +++ b/drivers/clk/at91/clk-system.c
>> @@ -34,7 +34,7 @@ static inline bool clk_system_ready(struct regmap *regmap, int id)
>>
>>       regmap_read(regmap, AT91_PMC_SR, &status);
>>
>> -     return status & (1 << id) ? 1 : 0;
>> +     return !!(status & (1 << id));
>>  }
>>
>>  static int clk_system_prepare(struct clk_hw *hw)
>> @@ -74,7 +74,7 @@ static int clk_system_is_prepared(struct clk_hw *hw)
>>
>>       regmap_read(sys->regmap, AT91_PMC_SR, &status);
>>
>> -     return status & (1 << sys->id) ? 1 : 0;
>> +     return !!(status & (1 << sys->id));
>>  }
>>
>>  static const struct clk_ops system_ops = {
>> --
>> 2.7.4
>>
> 
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
> 

  reply	other threads:[~2020-07-20 10:36 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-15 11:24 [PATCH 00/19] clk: at91: add sama7g5 clock support Claudiu Beznea
2020-07-15 11:24 ` [PATCH 01/19] clk: at91: clk-generated: continue if __clk_determine_rate() returns error Claudiu Beznea
2020-07-17  9:09   ` Alexandre Belloni
2020-07-15 11:24 ` [PATCH 02/19] clk: at91: clk-generated: check best_rate against ranges Claudiu Beznea
2020-07-17  9:10   ` Alexandre Belloni
2020-07-15 11:24 ` [PATCH 03/19] clk: at91: clk-sam9x60-pll: fix mul mask Claudiu Beznea
2020-07-17  9:11   ` Alexandre Belloni
2020-07-15 11:24 ` [PATCH 04/19] clk: at91: sam9x60-pll: use frac when computing pll frequency Claudiu Beznea
2020-07-15 11:24 ` [PATCH 05/19] clk: at91: sam9x60-pll: use logical or for range check Claudiu Beznea
2020-07-17  9:13   ` Alexandre Belloni
2020-07-15 11:24 ` [PATCH 06/19] clk: at91: sam9x60-pll: check fcore against ranges Claudiu Beznea
2020-07-17  9:23   ` Alexandre Belloni
2020-07-15 11:24 ` [PATCH 07/19] clk: at91: sam9x60-pll: use frac when setting frequency Claudiu Beznea
2020-07-17  9:12   ` Alexandre Belloni
2020-07-20 10:34     ` Claudiu.Beznea
2020-07-15 11:24 ` [PATCH 08/19] clk: at91: sam9x60: fix main rc oscillator frequency Claudiu Beznea
2020-07-17  9:17   ` Alexandre Belloni
2020-07-15 11:24 ` [PATCH 09/19] clk: at91: sckc: register slow_rc with accuracy option Claudiu Beznea
2020-07-15 15:39   ` Claudiu.Beznea
2020-07-15 11:24 ` [PATCH 10/19] clk: at91: replace conditional operator with double logical not Claudiu Beznea
2020-07-17 15:07   ` Alexandre Belloni
2020-07-20 10:36     ` Claudiu.Beznea [this message]
2020-07-15 11:24 ` [PATCH 11/19] clk: at91: clk-generated: pass the id of changeable parent at registration Claudiu Beznea
2020-07-16 16:57   ` Codrin.Ciubotariu
2020-07-15 11:24 ` [PATCH 12/19] clk: at91: clk-generated: add mux_table option Claudiu Beznea
2020-07-15 11:24 ` [PATCH 13/19] clk: at91: clk-master: add master clock support for SAMA7G5 Claudiu Beznea
2020-07-15 11:24 ` [PATCH 14/19] clk: at91: clk-peripheral: add support for changeable parent rate Claudiu Beznea
2020-07-15 11:24 ` [PATCH 15/19] clk: at91: clk-programmable: add mux_table option Claudiu Beznea
2020-07-15 11:24 ` [PATCH 16/19] clk: at91: add macro for pll ids mask Claudiu Beznea
2020-07-15 11:24 ` [PATCH 17/19] clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Claudiu Beznea
2020-07-15 11:24 ` [PATCH 18/19] clk: at91: clk-utmi: add utmi support for sama7g5 Claudiu Beznea
2020-07-15 11:24 ` [PATCH 19/19] clk: at91: sama7g5: add clock " Claudiu Beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=65c18837-7452-f970-e777-11929dbf8975@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=Ludovic.Desroches@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bbrezillon@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).