From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Cc: Eddie James <eajames@linux.ibm.com>
Subject: [PATCH linux dev-5.10 12/14] fsi: sbefifo: Increase command timeouts to 30 seconds
Date: Wed, 11 Aug 2021 10:42:30 -0500 [thread overview]
Message-ID: <20210811154232.12649-13-eajames@linux.ibm.com> (raw)
In-Reply-To: <20210811154232.12649-1-eajames@linux.ibm.com>
Different commands (with different sizes) require different timeouts,
the longest of which can be up to 30 seconds. Adjust the command
timeout accordingly.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/fsi/fsi-sbefifo.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/fsi/fsi-sbefifo.c b/drivers/fsi/fsi-sbefifo.c
index 84cb965bfed5..8645a092af89 100644
--- a/drivers/fsi/fsi-sbefifo.c
+++ b/drivers/fsi/fsi-sbefifo.c
@@ -102,12 +102,12 @@ enum sbe_state
#define sbefifo_eot_set(sts) (((sts) & SBEFIFO_STS_EOT_MASK) >> SBEFIFO_STS_EOT_SHIFT)
/* Reset request timeout in ms */
-#define SBEFIFO_RESET_TIMEOUT 10000
+#define SBEFIFO_RESET_TIMEOUT 30000
/* Timeouts for commands in ms */
-#define SBEFIFO_TIMEOUT_START_CMD 10000
+#define SBEFIFO_TIMEOUT_START_CMD 30000
#define SBEFIFO_TIMEOUT_IN_CMD 1000
-#define SBEFIFO_TIMEOUT_START_RSP 10000
+#define SBEFIFO_TIMEOUT_START_RSP 30000
#define SBEFIFO_TIMEOUT_IN_RSP 1000
/* Other constants */
--
2.27.0
next prev parent reply other threads:[~2021-08-11 15:50 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-11 15:42 [PATCH linux dev-5.10 00/14] Rainier and Everest system fixes Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 01/14] i2c: Allow throttling of transfers to client devices Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 02/14] pmbus: (ucd9000) Throttle SMBus transfers to avoid poor behaviour Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 03/14] ucd9000: Add a throttle delay attribute in debugfs Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 04/14] fsi: run clock at 100MHz Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 05/14] pmbus: (core) Add a one-shot retry in pmbus_set_page() Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 06/14] pmbus: (max31785) Add a local pmbus_set_page() implementation Eddie James
2021-08-11 16:13 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 07/14] pmbus: (max31785) Retry enabling fans after writing MFR_FAN_CONFIG Eddie James
2021-08-11 16:14 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 08/14] ARM: dts: aspeed: Rainier: Add fan controller properties Eddie James
2021-08-11 16:14 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 09/14] ARM: dts: aspeed: Everest: " Eddie James
2021-08-11 16:15 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 10/14] ARM: dts: aspeed: Rainier 4U: Delete fan dual-tach properties Eddie James
2021-08-11 16:17 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 11/14] ARM: dts: aspeed: Add Rainier 2U and 4U device trees for pass 1 hardware Eddie James
2021-08-11 15:42 ` Eddie James [this message]
2021-08-11 15:42 ` [PATCH linux dev-5.10 13/14] fsi: occ: Add dynamic debug to dump command and response Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 14/14] fsi: sbefifo: Use interruptible mutex locking Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210811154232.12649-13-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).