openbmc.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Cc: Andrew Jeffery <andrew@aj.id.au>
Subject: [PATCH linux dev-5.10 06/14] pmbus: (max31785) Add a local pmbus_set_page() implementation
Date: Wed, 11 Aug 2021 10:42:24 -0500	[thread overview]
Message-ID: <20210811154232.12649-7-eajames@linux.ibm.com> (raw)
In-Reply-To: <20210811154232.12649-1-eajames@linux.ibm.com>

From: Andrew Jeffery <andrew@aj.id.au>

Extensive testing and tracing has shown that the MAX31785 is unreliable
in the face of PAGE write commands, ACK'ing the PAGE request but
reporting a value of 0 on some subsequent PAGE reads. The trace data
suggests that a one-shot retry of the PAGE write is enough to get the
requested value to stick.

As we configure the device before registering with the PMBus core,
centralise PAGE handling inside the driver and implement the one-shot
retry semantics there.

OpenBMC-Staging-Count: 1
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 drivers/hwmon/pmbus/max31785.c | 32 ++++++++++++++++++++++++++------
 1 file changed, 26 insertions(+), 6 deletions(-)

diff --git a/drivers/hwmon/pmbus/max31785.c b/drivers/hwmon/pmbus/max31785.c
index d097f72d4d47..7518fff356f9 100644
--- a/drivers/hwmon/pmbus/max31785.c
+++ b/drivers/hwmon/pmbus/max31785.c
@@ -362,6 +362,27 @@ static int max31785_write_word_data(struct i2c_client *client, int page,
 	return -ENXIO;
 }
 
+static int max31785_pmbus_set_page(struct i2c_client *client, int page)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		ret = max31785_i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+		if (ret < 0)
+			return ret;
+
+		ret = max31785_i2c_smbus_read_byte_data(client, PMBUS_PAGE);
+		if (ret < 0)
+			return ret;
+
+		if (ret == page)
+			return 0;
+	}
+
+	return -EIO;
+}
+
 /*
  * Returns negative error codes if an unrecoverable problem is detected, 0 if a
  * recoverable problem is detected, or a positive value on success.
@@ -392,7 +413,7 @@ static int max31785_of_fan_config(struct i2c_client *client,
 		return -ENXIO;
 	}
 
-	ret = max31785_i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+	ret = max31785_pmbus_set_page(client, page);
 	if (ret < 0)
 		return ret;
 
@@ -599,7 +620,7 @@ static int max31785_of_tmp_config(struct i2c_client *client,
 		return -ENXIO;
 	}
 
-	ret = max31785_i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+	ret = max31785_pmbus_set_page(client, page);
 	if (ret < 0)
 		return ret;
 
@@ -700,7 +721,7 @@ static int max31785_configure_dual_tach(struct i2c_client *client,
 	int i;
 
 	for (i = 0; i < MAX31785_NR_FAN_PAGES; i++) {
-		ret = max31785_i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+		ret = max31785_pmbus_set_page(client, i);
 		if (ret < 0)
 			return ret;
 
@@ -741,7 +762,7 @@ static int max31785_probe(struct i2c_client *client)
 
 	*info = max31785_info;
 
-	ret = max31785_i2c_smbus_write_byte_data(client, PMBUS_PAGE, 255);
+	ret = max31785_pmbus_set_page(client, 255);
 	if (ret < 0)
 		return ret;
 
@@ -785,8 +806,7 @@ static int max31785_probe(struct i2c_client *client)
 		if (!have_fan || fan_configured)
 			continue;
 
-		ret = max31785_i2c_smbus_write_byte_data(client, PMBUS_PAGE,
-							 i);
+		ret = max31785_pmbus_set_page(client, i);
 		if (ret < 0)
 			return ret;
 
-- 
2.27.0


  parent reply	other threads:[~2021-08-11 15:52 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-11 15:42 [PATCH linux dev-5.10 00/14] Rainier and Everest system fixes Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 01/14] i2c: Allow throttling of transfers to client devices Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 02/14] pmbus: (ucd9000) Throttle SMBus transfers to avoid poor behaviour Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 03/14] ucd9000: Add a throttle delay attribute in debugfs Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 04/14] fsi: run clock at 100MHz Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 05/14] pmbus: (core) Add a one-shot retry in pmbus_set_page() Eddie James
2021-08-11 15:42 ` Eddie James [this message]
2021-08-11 16:13   ` [PATCH linux dev-5.10 06/14] pmbus: (max31785) Add a local pmbus_set_page() implementation Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 07/14] pmbus: (max31785) Retry enabling fans after writing MFR_FAN_CONFIG Eddie James
2021-08-11 16:14   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 08/14] ARM: dts: aspeed: Rainier: Add fan controller properties Eddie James
2021-08-11 16:14   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 09/14] ARM: dts: aspeed: Everest: " Eddie James
2021-08-11 16:15   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 10/14] ARM: dts: aspeed: Rainier 4U: Delete fan dual-tach properties Eddie James
2021-08-11 16:17   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 11/14] ARM: dts: aspeed: Add Rainier 2U and 4U device trees for pass 1 hardware Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 12/14] fsi: sbefifo: Increase command timeouts to 30 seconds Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 13/14] fsi: occ: Add dynamic debug to dump command and response Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 14/14] fsi: sbefifo: Use interruptible mutex locking Eddie James

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210811154232.12649-7-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=andrew@aj.id.au \
    --cc=openbmc@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).