From: Peter Maydell <peter.maydell@linaro.org>
To: Hongbo Zhang <hongbo.zhang@linaro.org>
Cc: QEMU Developers <qemu-devel@nongnu.org>,
qemu-arm <qemu-arm@nongnu.org>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Leif Lindholm <leif.lindholm@linaro.org>,
Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Subject: Re: [Qemu-devel] [PATCH v7 0/2] Add Arm SBSA Reference Machine
Date: Tue, 30 Apr 2019 15:18:53 +0100 [thread overview]
Message-ID: <CAFEAcA_AZgLmYRkfKzgWpptkUdz-Qpa=Zwk7x0kONxQ64-WMSA@mail.gmail.com> (raw)
In-Reply-To: <1555560291-3415-1-git-send-email-hongbo.zhang@linaro.org>
On Thu, 18 Apr 2019 at 05:05, Hongbo Zhang <hongbo.zhang@linaro.org> wrote:
>
> For the Aarch64, there is one machine 'virt', it is primarily meant to
> run on KVM and execute virtualization workloads, but we need an
> environment as faithful as possible to physical hardware, to support
> firmware and OS development for pysical Aarch64 machines.
>
> This machine comes with:
> - Re-designed memory map.
> - CPU cortex-a57.
> - EL2 and EL3 enabled.
> - GIC version 3.
> - System bus AHCI controller.
> - System bus XHCI controller.
> - CDROM and hard disc on AHCI bus.
> - E1000E ethernet card on PCIE bus.
> - VGA display adaptor on PCIE bus.
> - Only minimal device tree nodes.
> And without:
> - virtio deivces.
> - fw_cfg device.
> - ACPI tables.
I've had a look through these patches -- my comments are all
pretty minor. There are a few places where I don't really know
the right answer and have asked other people to weigh in on
whether changes (proposed or recent) for the virt board should
be applied here too.
thanks
-- PMM
WARNING: multiple messages have this Message-ID (diff)
From: Peter Maydell <peter.maydell@linaro.org>
To: Hongbo Zhang <hongbo.zhang@linaro.org>
Cc: qemu-arm <qemu-arm@nongnu.org>,
Radoslaw Biernacki <radoslaw.biernacki@linaro.org>,
QEMU Developers <qemu-devel@nongnu.org>,
Leif Lindholm <leif.lindholm@linaro.org>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: Re: [Qemu-devel] [PATCH v7 0/2] Add Arm SBSA Reference Machine
Date: Tue, 30 Apr 2019 15:18:53 +0100 [thread overview]
Message-ID: <CAFEAcA_AZgLmYRkfKzgWpptkUdz-Qpa=Zwk7x0kONxQ64-WMSA@mail.gmail.com> (raw)
Message-ID: <20190430141853.SMrb0URPLEjIhG9Ji9uA359-U97vYYnayBh6wDnDqrs@z> (raw)
In-Reply-To: <1555560291-3415-1-git-send-email-hongbo.zhang@linaro.org>
On Thu, 18 Apr 2019 at 05:05, Hongbo Zhang <hongbo.zhang@linaro.org> wrote:
>
> For the Aarch64, there is one machine 'virt', it is primarily meant to
> run on KVM and execute virtualization workloads, but we need an
> environment as faithful as possible to physical hardware, to support
> firmware and OS development for pysical Aarch64 machines.
>
> This machine comes with:
> - Re-designed memory map.
> - CPU cortex-a57.
> - EL2 and EL3 enabled.
> - GIC version 3.
> - System bus AHCI controller.
> - System bus XHCI controller.
> - CDROM and hard disc on AHCI bus.
> - E1000E ethernet card on PCIE bus.
> - VGA display adaptor on PCIE bus.
> - Only minimal device tree nodes.
> And without:
> - virtio deivces.
> - fw_cfg device.
> - ACPI tables.
I've had a look through these patches -- my comments are all
pretty minor. There are a few places where I don't really know
the right answer and have asked other people to weigh in on
whether changes (proposed or recent) for the virt board should
be applied here too.
thanks
-- PMM
next prev parent reply other threads:[~2019-04-30 14:19 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-18 4:04 [Qemu-devel] [PATCH v7 0/2] Add Arm SBSA Reference Machine Hongbo Zhang
2019-04-18 4:04 ` Hongbo Zhang
2019-04-18 4:04 ` [Qemu-devel] [PATCH v7 1/2] hw/arm: Add arm SBSA reference machine, skeleton part Hongbo Zhang
2019-04-18 4:04 ` Hongbo Zhang
2019-04-30 14:03 ` Peter Maydell
2019-04-30 14:03 ` Peter Maydell
2019-05-08 11:22 ` Hongbo Zhang
2019-05-09 14:27 ` Igor Mammedov
2019-05-09 14:40 ` Peter Maydell
2019-04-18 4:04 ` [Qemu-devel] [PATCH v7 2/2] hw/arm: Add arm SBSA reference machine, devices part Hongbo Zhang
2019-04-18 4:04 ` Hongbo Zhang
2019-04-30 14:16 ` Peter Maydell
2019-04-30 14:16 ` Peter Maydell
2019-05-08 11:30 ` Hongbo Zhang
2019-05-08 17:48 ` Radoslaw Biernacki
2019-05-09 8:46 ` Peter Maydell
2019-05-08 13:59 ` Markus Armbruster
2019-06-02 3:16 ` Hongbo Zhang
2019-06-03 10:54 ` Philippe Mathieu-Daudé
2019-06-16 11:41 ` Hongbo Zhang
2019-06-17 11:08 ` Philippe Mathieu-Daudé
2019-06-17 2:44 ` Hongbo Zhang
2019-04-30 14:18 ` Peter Maydell [this message]
2019-04-30 14:18 ` [Qemu-devel] [PATCH v7 0/2] Add Arm SBSA Reference Machine Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFEAcA_AZgLmYRkfKzgWpptkUdz-Qpa=Zwk7x0kONxQ64-WMSA@mail.gmail.com' \
--to=peter.maydell@linaro.org \
--cc=ard.biesheuvel@linaro.org \
--cc=hongbo.zhang@linaro.org \
--cc=leif.lindholm@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=radoslaw.biernacki@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).