From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: Biju Das <biju.das.jz@bp.renesas.com>, Adam Ford <aford173@gmail.com>, Florian Fainelli <f.fainelli@gmail.com>, Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>, Russell King <linux@armlinux.org.uk>, Grygorii Strashko <grygorii.strashko@ti.com>, linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 8/9] arm64: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs Date: Thu, 9 Sep 2021 10:49:44 +0200 [thread overview] Message-ID: <07bd7e04dda9e84cde0664980f0b1a6d69e03109.1631174218.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1631174218.git.geert+renesas@glider.be> Add compatible values to Ethernet PHY subnodes representing Micrel KSZ9031 PHYs on R-Car Gen3 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- I could not verify the PHY revision number (least significant nibble of the ID) on eagle, v3msk, conder, and v3hsk, due to lack of hardware. --- arch/arm64/boot/dts/renesas/draak.dtsi | 2 ++ arch/arm64/boot/dts/renesas/ebisu.dtsi | 2 ++ arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts | 2 ++ arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 ++ arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 ++ 9 files changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index ff799ab73f8a479d..5f5a0bb2da86cc57 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -243,6 +243,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio5>; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index 54f88bb7e5920296..0fdfc67cb965afd9 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -302,6 +302,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index d24da54f312b9085..c7451973f8a5b2a7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -92,6 +92,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 2426e533128ceb42..2f77ec4ed7e16166 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -107,6 +107,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index edf7f2a2f958787c..4cb5bfa6932d5809 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -132,6 +132,8 @@ &gether { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 7838dcee31362705..ca69d1b1d67af047 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -113,6 +113,8 @@ &gether { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index dc671ff57ec7678a..e46dc9aa0a43a60f 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -27,6 +27,8 @@ &avb0 { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index de959f28ad6ce27b..04ba101a711119a4 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -346,6 +346,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 1f177af3eb9dfa37..7edffe7f8cfa326f 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -154,6 +154,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: Biju Das <biju.das.jz@bp.renesas.com>, Adam Ford <aford173@gmail.com>, Florian Fainelli <f.fainelli@gmail.com>, Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>, Russell King <linux@armlinux.org.uk>, Grygorii Strashko <grygorii.strashko@ti.com>, linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 8/9] arm64: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs Date: Thu, 9 Sep 2021 10:49:44 +0200 [thread overview] Message-ID: <07bd7e04dda9e84cde0664980f0b1a6d69e03109.1631174218.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1631174218.git.geert+renesas@glider.be> Add compatible values to Ethernet PHY subnodes representing Micrel KSZ9031 PHYs on R-Car Gen3 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- I could not verify the PHY revision number (least significant nibble of the ID) on eagle, v3msk, conder, and v3hsk, due to lack of hardware. --- arch/arm64/boot/dts/renesas/draak.dtsi | 2 ++ arch/arm64/boot/dts/renesas/ebisu.dtsi | 2 ++ arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts | 2 ++ arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 ++ arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 ++ 9 files changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index ff799ab73f8a479d..5f5a0bb2da86cc57 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -243,6 +243,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio5>; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index 54f88bb7e5920296..0fdfc67cb965afd9 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -302,6 +302,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index d24da54f312b9085..c7451973f8a5b2a7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -92,6 +92,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 2426e533128ceb42..2f77ec4ed7e16166 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -107,6 +107,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index edf7f2a2f958787c..4cb5bfa6932d5809 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -132,6 +132,8 @@ &gether { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 7838dcee31362705..ca69d1b1d67af047 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -113,6 +113,8 @@ &gether { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index dc671ff57ec7678a..e46dc9aa0a43a60f 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -27,6 +27,8 @@ &avb0 { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index de959f28ad6ce27b..04ba101a711119a4 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -346,6 +346,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 1f177af3eb9dfa37..7edffe7f8cfa326f 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -154,6 +154,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-09 8:50 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-09-09 8:49 [PATCH 0/9] renesas: Add compatible properties to Ethernet PHY nodes Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven 2021-09-09 8:49 ` [PATCH 1/9] ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven 2021-09-09 8:49 ` [PATCH 2/9] ARM: dts: renesas: Add compatible properties to KSZ8081 " Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven 2021-09-09 8:49 ` [PATCH 3/9] ARM: dts: renesas: Add compatible properties to KSZ9031 " Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven 2021-09-23 11:41 ` Biju Das 2021-09-23 11:41 ` Biju Das 2021-09-09 8:49 ` [PATCH 4/9] iARM: dts: renesas: Add compatible properties to LAN8710A " Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven 2021-09-09 8:49 ` [PATCH 5/9] ARM: dts: renesas: Add compatible properties to RTL8201FL " Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven 2021-09-09 8:49 ` [PATCH 6/9] ARM: dts: renesas: Add compatible properties to uPD6061x " Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven 2021-09-09 8:49 ` [PATCH 7/9] arm64: dts: renesas: Add compatible properties to AR8031 " Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven [this message] 2021-09-09 8:49 ` [PATCH 8/9] arm64: dts: renesas: Add compatible properties to KSZ9031 " Geert Uytterhoeven 2021-09-28 7:40 ` Geert Uytterhoeven 2021-09-28 7:40 ` Geert Uytterhoeven 2021-09-09 8:49 ` [PATCH 9/9] arm64: dts: renesas: Add compatible properties to RTL8211E " Geert Uytterhoeven 2021-09-09 8:49 ` Geert Uytterhoeven 2021-09-23 11:38 ` Biju Das 2021-09-23 11:38 ` Biju Das 2021-09-23 11:00 ` [PATCH 0/9] renesas: Add compatible properties to Ethernet PHY nodes Geert Uytterhoeven 2021-09-23 11:00 ` Geert Uytterhoeven 2021-09-23 14:09 ` Andrew Lunn 2021-09-23 14:09 ` Andrew Lunn
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=07bd7e04dda9e84cde0664980f0b1a6d69e03109.1631174218.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=aford173@gmail.com \ --cc=andrew@lunn.ch \ --cc=biju.das.jz@bp.renesas.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=grygorii.strashko@ti.com \ --cc=hkallweit1@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=magnus.damm@gmail.com \ --cc=netdev@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.