From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Adam Ford <aford173@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Grygorii Strashko <grygorii.strashko@ti.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 3/9] ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
Date: Thu, 9 Sep 2021 10:49:39 +0200 [thread overview]
Message-ID: <ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1631174218.git.geert+renesas@glider.be>
Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
I could not verify the PHY revision number (least significant nibble of
the ID), due to lack of hardware.
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 2 ++
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 2 ++
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 2 ++
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 2 ++
4 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index bc857676d19104a1..849034a49a3f98e2 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -158,6 +158,8 @@ &avb {
status = "okay";
phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
reg = <3>;
micrel,led-mode = <1>;
};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 94bf8a116b5242a9..a5a79cdbcd0ee09b 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -175,6 +175,8 @@ &avb {
status = "okay";
phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
reg = <3>;
micrel,led-mode = <1>;
};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 73bd62d8a929e5da..c105932f642ea517 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -123,6 +123,8 @@ phy3: ethernet-phy@3 {
* On some older versions of the platform (before R4.0) the phy address
* may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
*/
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
reg = <3>;
micrel,led-mode = <1>;
};
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 8ac61b50aec03190..b024621c998103b2 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -79,6 +79,8 @@ &avb {
status = "okay";
phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
reg = <3>;
interrupt-parent = <&gpio5>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Adam Ford <aford173@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Grygorii Strashko <grygorii.strashko@ti.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 3/9] ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
Date: Thu, 9 Sep 2021 10:49:39 +0200 [thread overview]
Message-ID: <ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1631174218.git.geert+renesas@glider.be>
Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
I could not verify the PHY revision number (least significant nibble of
the ID), due to lack of hardware.
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 2 ++
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 2 ++
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 2 ++
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 2 ++
4 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index bc857676d19104a1..849034a49a3f98e2 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -158,6 +158,8 @@ &avb {
status = "okay";
phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
reg = <3>;
micrel,led-mode = <1>;
};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 94bf8a116b5242a9..a5a79cdbcd0ee09b 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -175,6 +175,8 @@ &avb {
status = "okay";
phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
reg = <3>;
micrel,led-mode = <1>;
};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 73bd62d8a929e5da..c105932f642ea517 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -123,6 +123,8 @@ phy3: ethernet-phy@3 {
* On some older versions of the platform (before R4.0) the phy address
* may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
*/
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
reg = <3>;
micrel,led-mode = <1>;
};
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 8ac61b50aec03190..b024621c998103b2 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -79,6 +79,8 @@ &avb {
status = "okay";
phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
reg = <3>;
interrupt-parent = <&gpio5>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-09 8:50 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-09 8:49 [PATCH 0/9] renesas: Add compatible properties to Ethernet PHY nodes Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 1/9] ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 2/9] ARM: dts: renesas: Add compatible properties to KSZ8081 " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven [this message]
2021-09-09 8:49 ` [PATCH 3/9] ARM: dts: renesas: Add compatible properties to KSZ9031 " Geert Uytterhoeven
2021-09-23 11:41 ` Biju Das
2021-09-23 11:41 ` Biju Das
2021-09-09 8:49 ` [PATCH 4/9] iARM: dts: renesas: Add compatible properties to LAN8710A " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 5/9] ARM: dts: renesas: Add compatible properties to RTL8201FL " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 6/9] ARM: dts: renesas: Add compatible properties to uPD6061x " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 7/9] arm64: dts: renesas: Add compatible properties to AR8031 " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 8/9] arm64: dts: renesas: Add compatible properties to KSZ9031 " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-28 7:40 ` Geert Uytterhoeven
2021-09-28 7:40 ` Geert Uytterhoeven
2021-09-09 8:49 ` [PATCH 9/9] arm64: dts: renesas: Add compatible properties to RTL8211E " Geert Uytterhoeven
2021-09-09 8:49 ` Geert Uytterhoeven
2021-09-23 11:38 ` Biju Das
2021-09-23 11:38 ` Biju Das
2021-09-23 11:00 ` [PATCH 0/9] renesas: Add compatible properties to Ethernet PHY nodes Geert Uytterhoeven
2021-09-23 11:00 ` Geert Uytterhoeven
2021-09-23 14:09 ` Andrew Lunn
2021-09-23 14:09 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=aford173@gmail.com \
--cc=andrew@lunn.ch \
--cc=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=grygorii.strashko@ti.com \
--cc=hkallweit1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.