From: Vignesh Raghavendra <vigneshr@ti.com> To: Matt Ranostay <mranostay@ti.com>, <nm@ti.com>, <afd@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>, <r-gunasekaran@ti.com> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: Re: [PATCH v7 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Date: Mon, 9 Jan 2023 09:39:07 +0530 [thread overview] Message-ID: <0975e89d-e55d-cf17-da77-636f4b0cbf9f@ti.com> (raw) In-Reply-To: <20221122101616.770050-3-mranostay@ti.com> [...] On 22/11/22 15:46, Matt Ranostay wrote: > +#include <dt-bindings/phy/phy-cadence.h> > +#include <dt-bindings/phy/phy-ti.h> > + > +/ { > + serdes_refclk: clock-cmnrefclk { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <0>; > + }; > +}; > + > &cbass_main { > msmc_ram: sram@70000000 { > compatible = "mmio-sram"; > @@ -38,6 +49,13 @@ usb_serdes_mux: mux-controller-0 { > #mux-control-cells = <1>; > mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ > }; > + > + serdes_ln_ctrl: mux-controller-80 { Same as previous patch: +/workdir/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon@104000: 'mux-controller-0', 'mux-controller-80' do not match any of the regexes: '^clock-controller@[0-9a-f]+$', '^mux-controller@[0-9a-f]+$', 'phy@[0-9a-f]+$', 'pinctrl-[0-9]+' > + compatible = "mmio-mux"; > + #mux-control-cells = <1>; > + mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */ > + <0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */ > + }; > }; [...] -- Regards Vignesh _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh Raghavendra <vigneshr@ti.com> To: Matt Ranostay <mranostay@ti.com>, <nm@ti.com>, <afd@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>, <r-gunasekaran@ti.com> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: Re: [PATCH v7 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Date: Mon, 9 Jan 2023 09:39:07 +0530 [thread overview] Message-ID: <0975e89d-e55d-cf17-da77-636f4b0cbf9f@ti.com> (raw) In-Reply-To: <20221122101616.770050-3-mranostay@ti.com> [...] On 22/11/22 15:46, Matt Ranostay wrote: > +#include <dt-bindings/phy/phy-cadence.h> > +#include <dt-bindings/phy/phy-ti.h> > + > +/ { > + serdes_refclk: clock-cmnrefclk { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <0>; > + }; > +}; > + > &cbass_main { > msmc_ram: sram@70000000 { > compatible = "mmio-sram"; > @@ -38,6 +49,13 @@ usb_serdes_mux: mux-controller-0 { > #mux-control-cells = <1>; > mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ > }; > + > + serdes_ln_ctrl: mux-controller-80 { Same as previous patch: +/workdir/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon@104000: 'mux-controller-0', 'mux-controller-80' do not match any of the regexes: '^clock-controller@[0-9a-f]+$', '^mux-controller@[0-9a-f]+$', 'phy@[0-9a-f]+$', 'pinctrl-[0-9]+' > + compatible = "mmio-mux"; > + #mux-control-cells = <1>; > + mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */ > + <0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */ > + }; > }; [...] -- Regards Vignesh
next prev parent reply other threads:[~2023-01-09 4:10 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-22 10:16 [PATCH v7 0/8] arm64: j721s2: Add support for additional IPs Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 10:16 ` [PATCH v7 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2023-01-09 4:07 ` Vignesh Raghavendra 2023-01-09 4:07 ` Vignesh Raghavendra 2022-11-22 10:16 ` [PATCH v7 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-23 10:35 ` Ravi Gunasekaran 2022-11-23 10:35 ` Ravi Gunasekaran 2023-01-09 4:09 ` Vignesh Raghavendra [this message] 2023-01-09 4:09 ` Vignesh Raghavendra 2022-11-22 10:16 ` [PATCH v7 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 14:03 ` Vaishnav Achath 2022-11-22 14:03 ` Vaishnav Achath 2022-11-29 17:34 ` Andrew Davis 2022-11-29 17:34 ` Andrew Davis 2023-01-09 4:10 ` Vignesh Raghavendra 2023-01-09 4:10 ` Vignesh Raghavendra 2022-11-22 10:16 ` [PATCH v7 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 10:16 ` [PATCH v7 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 10:16 ` [PATCH v7 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 14:04 ` Vaishnav Achath 2022-11-22 14:04 ` Vaishnav Achath 2022-11-22 10:16 ` [PATCH v7 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-29 17:53 ` Andrew Davis 2022-11-29 17:53 ` Andrew Davis [not found] ` <20230117092331.GA3277247@desktop-3598> 2023-01-17 9:32 ` Siddharth Vadapalli 2023-01-17 9:32 ` Siddharth Vadapalli 2022-11-22 10:16 ` [PATCH v7 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=0975e89d-e55d-cf17-da77-636f4b0cbf9f@ti.com \ --to=vigneshr@ti.com \ --cc=afd@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mranostay@ti.com \ --cc=nm@ti.com \ --cc=r-gunasekaran@ti.com \ --cc=robh+dt@kernel.org \ --cc=s-vadapalli@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.