From: Leonard Crestez <leonard.crestez@nxp.com>
To: Stephen Boyd <sboyd@kernel.org>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Rob Herring <robh+dt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
"Shawn Guo" <shawnguo@kernel.org>,
"Chanwoo Choi" <cw00.choi@samsung.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michael Turquette" <mturquette@baylibre.com>,
"Artur Świgoń" <a.swigon@partner.samsung.com>,
"Saravana Kannan" <saravanak@google.com>,
"Angus Ainslie" <angus@akkea.ca>,
"Martin Kepplinger" <martink@posteo.de>,
"Matthias Kaehlcke" <mka@chromium.org>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Alexandre Bailon" <abailon@baylibre.com>,
"Georgi Djakov" <georgi.djakov@linaro.org>,
"Dong Aisheng" <aisheng.dong@nxp.com>,
"Abel Vesa" <abel.vesa@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
"Anson Huang" <Anson.Huang@nxp.com>,
"Fabio Estevam" <fabio.estevam@nxp.com>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
linux-clk@vger.kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocks
Date: Sat, 9 Nov 2019 00:39:51 +0200 [thread overview]
Message-ID: <0e0eeeee546a3bb664935184d66866f1c66458ce.1573252696.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1573252696.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1573252696.git.leonard.crestez@nxp.com>
These clocks are only modified as part of DRAM frequency switches during
which DRAM itself is briefly inaccessible. The switch is performed with
a SMC call to by TF-A which runs from a SRAM area; upon returning to
linux several clocks bits are modified and we need to update them.
For rate bits an easy solution is to just mark with
CLK_GET_RATE_NOCACHE so that new rates are always read back from
registers.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
drivers/clk/imx/clk-imx8mm.c | 11 +++++++++--
drivers/clk/imx/clk-imx8mn.c | 12 ++++++++++--
drivers/clk/imx/clk-imx8mq.c | 15 +++++++++++----
3 files changed, 30 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 030b15d7c0ce..c58f988191a5 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -440,13 +440,20 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
/* IPG */
clks[IMX8MM_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
clks[IMX8MM_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
+ /*
+ * DRAM clocks are manipulated from TF-A outside clock framework.
+ * Mark with GET_RATE_NOCACHE to always read div value from hardware
+ */
+ clks[IMX8MM_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000,
+ CLK_GET_RATE_NOCACHE);
+ clks[IMX8MM_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mm_dram_apb_sels, base + 0xa080,
+ CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
+
/* IP */
- clks[IMX8MM_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000);
- clks[IMX8MM_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mm_dram_apb_sels, base + 0xa080);
clks[IMX8MM_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mm_vpu_g1_sels, base + 0xa100);
clks[IMX8MM_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mm_vpu_g2_sels, base + 0xa180);
clks[IMX8MM_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mm_disp_dtrc_sels, base + 0xa200);
clks[IMX8MM_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mm_disp_dc8000_sels, base + 0xa280);
clks[IMX8MM_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mm_pcie1_ctrl_sels, base + 0xa300);
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 9f5a5a56b45e..ca78cb1249a7 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -428,12 +428,20 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
clks[IMX8MN_CLK_AHB] = imx8m_clk_composite_critical("ahb", imx8mn_ahb_sels, base + 0x9000);
clks[IMX8MN_CLK_AUDIO_AHB] = imx8m_clk_composite("audio_ahb", imx8mn_audio_ahb_sels, base + 0x9100);
clks[IMX8MN_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
clks[IMX8MN_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
clks[IMX8MN_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mn_dram_core_sels, ARRAY_SIZE(imx8mn_dram_core_sels), CLK_IS_CRITICAL);
- clks[IMX8MN_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000);
- clks[IMX8MN_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mn_dram_apb_sels, base + 0xa080);
+
+ /*
+ * DRAM clocks are manipulated from TF-A outside clock framework.
+ * Mark with GET_RATE_NOCACHE to always read div value from hardware
+ */
+ clks[IMX8MN_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000,
+ CLK_GET_RATE_NOCACHE);
+ clks[IMX8MN_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mn_dram_apb_sels, base + 0xa080,
+ CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
+
clks[IMX8MN_CLK_DISP_PIXEL] = imx8m_clk_composite("disp_pixel", imx8mn_disp_pixel_sels, base + 0xa500);
clks[IMX8MN_CLK_SAI2] = imx8m_clk_composite("sai2", imx8mn_sai2_sels, base + 0xa600);
clks[IMX8MN_CLK_SAI3] = imx8m_clk_composite("sai3", imx8mn_sai3_sels, base + 0xa680);
clks[IMX8MN_CLK_SAI5] = imx8m_clk_composite("sai5", imx8mn_sai5_sels, base + 0xa780);
clks[IMX8MN_CLK_SAI6] = imx8m_clk_composite("sai6", imx8mn_sai6_sels, base + 0xa800);
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 5f10a606d836..3e2ccc17dc66 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -341,11 +341,12 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
clks[IMX8MQ_VIDEO_PLL1_OUT] = imx_clk_gate("video_pll1_out", "video_pll1_bypass", base + 0x10, 21);
clks[IMX8MQ_SYS1_PLL_OUT] = imx_clk_fixed("sys1_pll_out", 800000000);
clks[IMX8MQ_SYS2_PLL_OUT] = imx_clk_fixed("sys2_pll_out", 1000000000);
clks[IMX8MQ_SYS3_PLL_OUT] = imx_clk_sccg_pll("sys3_pll_out", sys3_pll_out_sels, ARRAY_SIZE(sys3_pll_out_sels), 0, 0, 0, base + 0x48, CLK_IS_CRITICAL);
- clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60, CLK_IS_CRITICAL);
+ clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60,
+ CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
clks[IMX8MQ_VIDEO2_PLL_OUT] = imx_clk_sccg_pll("video2_pll_out", video2_pll_out_sels, ARRAY_SIZE(video2_pll_out_sels), 0, 0, 0, base + 0x54, 0);
/* SYS PLL1 fixed output */
clks[IMX8MQ_SYS1_PLL_40M_CG] = imx_clk_gate("sys1_pll_40m_cg", "sys1_pll_out", base + 0x30, 9);
clks[IMX8MQ_SYS1_PLL_80M_CG] = imx_clk_gate("sys1_pll_80m_cg", "sys1_pll_out", base + 0x30, 11);
@@ -433,15 +434,21 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
/* IPG */
clks[IMX8MQ_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
clks[IMX8MQ_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
- /* IP */
+ /*
+ * DRAM clocks are manipulated from TF-A outside clock framework.
+ * Mark with GET_RATE_NOCACHE to always read div value from hardware
+ */
clks[IMX8MQ_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mq_dram_core_sels, ARRAY_SIZE(imx8mq_dram_core_sels), CLK_IS_CRITICAL);
+ clks[IMX8MQ_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000,
+ CLK_GET_RATE_NOCACHE);
+ clks[IMX8MQ_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mq_dram_apb_sels, base + 0xa080,
+ CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
- clks[IMX8MQ_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000);
- clks[IMX8MQ_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mq_dram_apb_sels, base + 0xa080);
+ /* IP */
clks[IMX8MQ_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mq_vpu_g1_sels, base + 0xa100);
clks[IMX8MQ_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mq_vpu_g2_sels, base + 0xa180);
clks[IMX8MQ_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mq_disp_dtrc_sels, base + 0xa200);
clks[IMX8MQ_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mq_disp_dc8000_sels, base + 0xa280);
clks[IMX8MQ_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mq_pcie1_ctrl_sels, base + 0xa300);
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Stephen Boyd <sboyd@kernel.org>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Rob Herring <robh+dt@kernel.org>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
"Artur Świgoń" <a.swigon@partner.samsung.com>,
"Jacky Bai" <ping.bai@nxp.com>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
"Michael Turquette" <mturquette@baylibre.com>,
"Angus Ainslie" <angus@akkea.ca>,
"Alexandre Bailon" <abailon@baylibre.com>,
linux-clk@vger.kernel.org, "Abel Vesa" <abel.vesa@nxp.com>,
"Saravana Kannan" <saravanak@google.com>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Chanwoo Choi" <cw00.choi@samsung.com>,
"Matthias Kaehlcke" <mka@chromium.org>,
linux-imx@nxp.com, devicetree@vger.kernel.org,
linux-pm@vger.kernel.org, "Martin Kepplinger" <martink@posteo.de>,
linux-arm-kernel@lists.infradead.org,
"Dong Aisheng" <aisheng.dong@nxp.com>,
"Anson Huang" <Anson.Huang@nxp.com>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
kernel@pengutronix.de, "Fabio Estevam" <fabio.estevam@nxp.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Georgi Djakov" <georgi.djakov@linaro.org>
Subject: [PATCH v4 1/6] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocks
Date: Sat, 9 Nov 2019 00:39:51 +0200 [thread overview]
Message-ID: <0e0eeeee546a3bb664935184d66866f1c66458ce.1573252696.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1573252696.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1573252696.git.leonard.crestez@nxp.com>
These clocks are only modified as part of DRAM frequency switches during
which DRAM itself is briefly inaccessible. The switch is performed with
a SMC call to by TF-A which runs from a SRAM area; upon returning to
linux several clocks bits are modified and we need to update them.
For rate bits an easy solution is to just mark with
CLK_GET_RATE_NOCACHE so that new rates are always read back from
registers.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
drivers/clk/imx/clk-imx8mm.c | 11 +++++++++--
drivers/clk/imx/clk-imx8mn.c | 12 ++++++++++--
drivers/clk/imx/clk-imx8mq.c | 15 +++++++++++----
3 files changed, 30 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 030b15d7c0ce..c58f988191a5 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -440,13 +440,20 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
/* IPG */
clks[IMX8MM_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
clks[IMX8MM_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
+ /*
+ * DRAM clocks are manipulated from TF-A outside clock framework.
+ * Mark with GET_RATE_NOCACHE to always read div value from hardware
+ */
+ clks[IMX8MM_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000,
+ CLK_GET_RATE_NOCACHE);
+ clks[IMX8MM_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mm_dram_apb_sels, base + 0xa080,
+ CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
+
/* IP */
- clks[IMX8MM_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000);
- clks[IMX8MM_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mm_dram_apb_sels, base + 0xa080);
clks[IMX8MM_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mm_vpu_g1_sels, base + 0xa100);
clks[IMX8MM_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mm_vpu_g2_sels, base + 0xa180);
clks[IMX8MM_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mm_disp_dtrc_sels, base + 0xa200);
clks[IMX8MM_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mm_disp_dc8000_sels, base + 0xa280);
clks[IMX8MM_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mm_pcie1_ctrl_sels, base + 0xa300);
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 9f5a5a56b45e..ca78cb1249a7 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -428,12 +428,20 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
clks[IMX8MN_CLK_AHB] = imx8m_clk_composite_critical("ahb", imx8mn_ahb_sels, base + 0x9000);
clks[IMX8MN_CLK_AUDIO_AHB] = imx8m_clk_composite("audio_ahb", imx8mn_audio_ahb_sels, base + 0x9100);
clks[IMX8MN_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
clks[IMX8MN_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
clks[IMX8MN_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mn_dram_core_sels, ARRAY_SIZE(imx8mn_dram_core_sels), CLK_IS_CRITICAL);
- clks[IMX8MN_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000);
- clks[IMX8MN_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mn_dram_apb_sels, base + 0xa080);
+
+ /*
+ * DRAM clocks are manipulated from TF-A outside clock framework.
+ * Mark with GET_RATE_NOCACHE to always read div value from hardware
+ */
+ clks[IMX8MN_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000,
+ CLK_GET_RATE_NOCACHE);
+ clks[IMX8MN_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mn_dram_apb_sels, base + 0xa080,
+ CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
+
clks[IMX8MN_CLK_DISP_PIXEL] = imx8m_clk_composite("disp_pixel", imx8mn_disp_pixel_sels, base + 0xa500);
clks[IMX8MN_CLK_SAI2] = imx8m_clk_composite("sai2", imx8mn_sai2_sels, base + 0xa600);
clks[IMX8MN_CLK_SAI3] = imx8m_clk_composite("sai3", imx8mn_sai3_sels, base + 0xa680);
clks[IMX8MN_CLK_SAI5] = imx8m_clk_composite("sai5", imx8mn_sai5_sels, base + 0xa780);
clks[IMX8MN_CLK_SAI6] = imx8m_clk_composite("sai6", imx8mn_sai6_sels, base + 0xa800);
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 5f10a606d836..3e2ccc17dc66 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -341,11 +341,12 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
clks[IMX8MQ_VIDEO_PLL1_OUT] = imx_clk_gate("video_pll1_out", "video_pll1_bypass", base + 0x10, 21);
clks[IMX8MQ_SYS1_PLL_OUT] = imx_clk_fixed("sys1_pll_out", 800000000);
clks[IMX8MQ_SYS2_PLL_OUT] = imx_clk_fixed("sys2_pll_out", 1000000000);
clks[IMX8MQ_SYS3_PLL_OUT] = imx_clk_sccg_pll("sys3_pll_out", sys3_pll_out_sels, ARRAY_SIZE(sys3_pll_out_sels), 0, 0, 0, base + 0x48, CLK_IS_CRITICAL);
- clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60, CLK_IS_CRITICAL);
+ clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60,
+ CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
clks[IMX8MQ_VIDEO2_PLL_OUT] = imx_clk_sccg_pll("video2_pll_out", video2_pll_out_sels, ARRAY_SIZE(video2_pll_out_sels), 0, 0, 0, base + 0x54, 0);
/* SYS PLL1 fixed output */
clks[IMX8MQ_SYS1_PLL_40M_CG] = imx_clk_gate("sys1_pll_40m_cg", "sys1_pll_out", base + 0x30, 9);
clks[IMX8MQ_SYS1_PLL_80M_CG] = imx_clk_gate("sys1_pll_80m_cg", "sys1_pll_out", base + 0x30, 11);
@@ -433,15 +434,21 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
/* IPG */
clks[IMX8MQ_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
clks[IMX8MQ_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
- /* IP */
+ /*
+ * DRAM clocks are manipulated from TF-A outside clock framework.
+ * Mark with GET_RATE_NOCACHE to always read div value from hardware
+ */
clks[IMX8MQ_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mq_dram_core_sels, ARRAY_SIZE(imx8mq_dram_core_sels), CLK_IS_CRITICAL);
+ clks[IMX8MQ_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000,
+ CLK_GET_RATE_NOCACHE);
+ clks[IMX8MQ_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mq_dram_apb_sels, base + 0xa080,
+ CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
- clks[IMX8MQ_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000);
- clks[IMX8MQ_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mq_dram_apb_sels, base + 0xa080);
+ /* IP */
clks[IMX8MQ_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mq_vpu_g1_sels, base + 0xa100);
clks[IMX8MQ_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mq_vpu_g2_sels, base + 0xa180);
clks[IMX8MQ_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mq_disp_dtrc_sels, base + 0xa200);
clks[IMX8MQ_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mq_disp_dc8000_sels, base + 0xa280);
clks[IMX8MQ_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mq_pcie1_ctrl_sels, base + 0xa300);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-08 22:40 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-08 22:39 [PATCH v4 0/6] PM / devfreq: Add dynamic scaling for imx8m ddr controller Leonard Crestez
2019-11-08 22:39 ` Leonard Crestez
2019-11-08 22:39 ` Leonard Crestez [this message]
2019-11-08 22:39 ` [PATCH v4 1/6] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocks Leonard Crestez
2019-11-12 11:18 ` Abel Vesa
2019-11-12 11:18 ` Abel Vesa
2019-11-12 13:43 ` Leonard Crestez
2019-11-12 13:43 ` Leonard Crestez
2019-11-12 15:10 ` Abel Vesa
2019-11-12 15:10 ` Abel Vesa
2019-11-08 22:39 ` [PATCH v4 2/6] clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHE Leonard Crestez
2019-11-08 22:39 ` Leonard Crestez
2019-11-12 11:18 ` Abel Vesa
2019-11-12 11:18 ` Abel Vesa
2019-11-08 22:39 ` [PATCH v4 3/6] dt-bindings: memory: Add bindings for imx8m ddr controller Leonard Crestez
2019-11-08 22:39 ` Leonard Crestez
2019-11-08 22:39 ` [PATCH v4 4/6] PM / devfreq: Add dynamic scaling " Leonard Crestez
2019-11-08 22:39 ` Leonard Crestez
2019-11-11 3:23 ` Chanwoo Choi
2019-11-11 3:23 ` Chanwoo Choi
2019-11-11 17:23 ` Leonard Crestez
2019-11-11 17:23 ` Leonard Crestez
2019-11-12 1:00 ` Chanwoo Choi
2019-11-12 1:00 ` Chanwoo Choi
2019-11-12 14:47 ` Leonard Crestez
2019-11-12 14:47 ` Leonard Crestez
2019-11-08 22:39 ` [PATCH v4 5/6] PM / devfreq: imx8m-ddrc: Measure bandwidth with perf Leonard Crestez
2019-11-08 22:39 ` Leonard Crestez
2019-11-11 5:18 ` Chanwoo Choi
2019-11-11 5:18 ` Chanwoo Choi
2019-11-12 13:17 ` Leonard Crestez
2019-11-12 13:17 ` Leonard Crestez
2019-11-13 1:43 ` Chanwoo Choi
2019-11-13 1:43 ` Chanwoo Choi
2019-11-08 22:39 ` [PATCH v4 6/6] arm64: dts: imx8m: Add ddr controller nodes Leonard Crestez
2019-11-08 22:39 ` Leonard Crestez
2020-06-22 13:58 ` [PATCH v4 0/6] PM / devfreq: Add dynamic scaling for imx8m ddr controller Martin Kepplinger
2020-06-24 6:08 ` Leonard Crestez
2020-06-24 6:08 ` Leonard Crestez
2020-06-25 6:57 ` Martin Kepplinger
2020-06-25 6:57 ` Martin Kepplinger
2020-06-25 14:47 ` Abel Vesa
2020-06-25 14:47 ` Abel Vesa
2020-06-29 6:32 ` Martin Kepplinger
2020-06-29 6:32 ` Martin Kepplinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0e0eeeee546a3bb664935184d66866f1c66458ce.1573252696.git.leonard.crestez@nxp.com \
--to=leonard.crestez@nxp.com \
--cc=Anson.Huang@nxp.com \
--cc=a.swigon@partner.samsung.com \
--cc=abailon@baylibre.com \
--cc=abel.vesa@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=angus@akkea.ca \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=georgi.djakov@linaro.org \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martink@posteo.de \
--cc=mka@chromium.org \
--cc=mturquette@baylibre.com \
--cc=myungjoo.ham@samsung.com \
--cc=ping.bai@nxp.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=saravanak@google.com \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.