From: Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org> To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org Cc: w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org> Subject: [PATCHv3 3/4] mc13xxx: Add i2c driver Date: Mon, 20 Dec 2010 14:50:54 +1100 [thread overview] Message-ID: <1292817055-17715-4-git-send-email-marc@cpdesign.com.au> (raw) In-Reply-To: <1292817055-17715-1-git-send-email-marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org> Adds i2c specific code for mc13xxx. Signed-off-by: Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org> --- drivers/mfd/mc13xxx-i2c.c | 115 +++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 115 insertions(+), 0 deletions(-) create mode 100644 drivers/mfd/mc13xxx-i2c.c diff --git a/drivers/mfd/mc13xxx-i2c.c b/drivers/mfd/mc13xxx-i2c.c new file mode 100644 index 0000000..f7ceed8 --- /dev/null +++ b/drivers/mfd/mc13xxx-i2c.c @@ -0,0 +1,115 @@ +/* + * Copyright 2009-2010 Creative Product Design + * Marc Reilly marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/mfd/core.h> +#include <linux/mfd/mc13xxx.h> +#include <linux/i2c.h> + +static int mc13xxx_i2c_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, + u32 *val) +{ + int ret; + unsigned char buf[3] = {0, 0, 0}; + + ret = i2c_smbus_read_i2c_block_data(mc13xxx->i2cclient, + offset, 3, buf); + *val = buf[0] << 16 | buf[1] << 8 | buf[2]; + + return ret == 3 ? 0 : ret; +} + +static int mc13xxx_i2c_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, + u32 val) +{ + int ret; + unsigned char buf[3]; + + buf[0] = (val >> 16) & 0xff; + buf[1] = (val >> 8) & 0xff; + buf[2] = val & 0xff; + + ret = i2c_smbus_write_i2c_block_data(mc13xxx->i2cclient, + offset, 3, buf); + + return ret; +} + +static int mc13xxx_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mc13xxx *mc13xxx; + struct mc13xxx_platform_data *pdata = dev_get_platdata(&client->dev); + int ret; + + mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL); + if (!mc13xxx) + return -ENOMEM; + + dev_set_drvdata(&client->dev, mc13xxx); + mc13xxx->dev = &client->dev; + mc13xxx->i2cclient = client; + mc13xxx->read_dev = mc13xxx_i2c_reg_read; + mc13xxx->write_dev = mc13xxx_i2c_reg_write; + + ret = mc13xxx_common_init(mc13xxx, pdata, client->irq); + + if (ret == 0 && (id->driver_data != mc13xxx->ictype)) + dev_warn(mc13xxx->dev, + "device id doesn't match auto detection!\n"); + + return ret; +} + +static int __devexit mc13xxx_i2c_remove(struct i2c_client *client) +{ + struct mc13xxx *mc13xxx = dev_get_drvdata(&client->dev); + + free_irq(client->irq, mc13xxx); + + mfd_remove_devices(&client->dev); + + kfree(mc13xxx); + + return 0; +} + +static const struct i2c_device_id mc13xxx_i2c_idtable[] = { + { "mc13892", MC13XXX_ID_MC13892}, + { } +}; + +static struct i2c_driver mc13xxx_i2c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "mc13xxx-i2c" + }, + .id_table = mc13xxx_i2c_idtable, + .probe = mc13xxx_i2c_probe, + .remove = __devexit_p(mc13xxx_i2c_remove), +}; + +static int __init mc13xxx_i2c_init(void) +{ + return i2c_add_driver(&mc13xxx_i2c_driver); +} +subsys_initcall(mc13xxx_i2c_init); + +static void __exit mc13xxx_i2c_exit(void) +{ + i2c_del_driver(&mc13xxx_i2c_driver); +} +module_exit(mc13xxx_i2c_exit); + +MODULE_DESCRIPTION("i2c driver for Freescale MC13XXX PMIC"); +MODULE_AUTHOR("Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org"); +MODULE_LICENSE("GPL v2"); -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: marc@cpdesign.com.au (Marc Reilly) To: linux-arm-kernel@lists.infradead.org Subject: [PATCHv3 3/4] mc13xxx: Add i2c driver Date: Mon, 20 Dec 2010 14:50:54 +1100 [thread overview] Message-ID: <1292817055-17715-4-git-send-email-marc@cpdesign.com.au> (raw) In-Reply-To: <1292817055-17715-1-git-send-email-marc@cpdesign.com.au> Adds i2c specific code for mc13xxx. Signed-off-by: Marc Reilly <marc@cpdesign.com.au> --- drivers/mfd/mc13xxx-i2c.c | 115 +++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 115 insertions(+), 0 deletions(-) create mode 100644 drivers/mfd/mc13xxx-i2c.c diff --git a/drivers/mfd/mc13xxx-i2c.c b/drivers/mfd/mc13xxx-i2c.c new file mode 100644 index 0000000..f7ceed8 --- /dev/null +++ b/drivers/mfd/mc13xxx-i2c.c @@ -0,0 +1,115 @@ +/* + * Copyright 2009-2010 Creative Product Design + * Marc Reilly marc at cpdesign.com.au + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/mfd/core.h> +#include <linux/mfd/mc13xxx.h> +#include <linux/i2c.h> + +static int mc13xxx_i2c_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, + u32 *val) +{ + int ret; + unsigned char buf[3] = {0, 0, 0}; + + ret = i2c_smbus_read_i2c_block_data(mc13xxx->i2cclient, + offset, 3, buf); + *val = buf[0] << 16 | buf[1] << 8 | buf[2]; + + return ret == 3 ? 0 : ret; +} + +static int mc13xxx_i2c_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, + u32 val) +{ + int ret; + unsigned char buf[3]; + + buf[0] = (val >> 16) & 0xff; + buf[1] = (val >> 8) & 0xff; + buf[2] = val & 0xff; + + ret = i2c_smbus_write_i2c_block_data(mc13xxx->i2cclient, + offset, 3, buf); + + return ret; +} + +static int mc13xxx_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mc13xxx *mc13xxx; + struct mc13xxx_platform_data *pdata = dev_get_platdata(&client->dev); + int ret; + + mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL); + if (!mc13xxx) + return -ENOMEM; + + dev_set_drvdata(&client->dev, mc13xxx); + mc13xxx->dev = &client->dev; + mc13xxx->i2cclient = client; + mc13xxx->read_dev = mc13xxx_i2c_reg_read; + mc13xxx->write_dev = mc13xxx_i2c_reg_write; + + ret = mc13xxx_common_init(mc13xxx, pdata, client->irq); + + if (ret == 0 && (id->driver_data != mc13xxx->ictype)) + dev_warn(mc13xxx->dev, + "device id doesn't match auto detection!\n"); + + return ret; +} + +static int __devexit mc13xxx_i2c_remove(struct i2c_client *client) +{ + struct mc13xxx *mc13xxx = dev_get_drvdata(&client->dev); + + free_irq(client->irq, mc13xxx); + + mfd_remove_devices(&client->dev); + + kfree(mc13xxx); + + return 0; +} + +static const struct i2c_device_id mc13xxx_i2c_idtable[] = { + { "mc13892", MC13XXX_ID_MC13892}, + { } +}; + +static struct i2c_driver mc13xxx_i2c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "mc13xxx-i2c" + }, + .id_table = mc13xxx_i2c_idtable, + .probe = mc13xxx_i2c_probe, + .remove = __devexit_p(mc13xxx_i2c_remove), +}; + +static int __init mc13xxx_i2c_init(void) +{ + return i2c_add_driver(&mc13xxx_i2c_driver); +} +subsys_initcall(mc13xxx_i2c_init); + +static void __exit mc13xxx_i2c_exit(void) +{ + i2c_del_driver(&mc13xxx_i2c_driver); +} +module_exit(mc13xxx_i2c_exit); + +MODULE_DESCRIPTION("i2c driver for Freescale MC13XXX PMIC"); +MODULE_AUTHOR("Marc Reilly <marc@cpdesign.com.au"); +MODULE_LICENSE("GPL v2"); -- 1.7.1
next prev parent reply other threads:[~2010-12-20 3:50 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2010-12-20 3:50 mc13xxx core support for i2c Marc Reilly 2010-12-20 3:50 ` Marc Reilly [not found] ` <1292817055-17715-1-git-send-email-marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org> 2010-12-20 3:50 ` [PATCHv3 1/4] mc13xxx-core: Consolidate common code to prepare for separate i2c and spi Marc Reilly 2010-12-20 3:50 ` Marc Reilly [not found] ` <1292817055-17715-2-git-send-email-marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org> 2010-12-20 8:31 ` Uwe Kleine-König 2010-12-20 8:31 ` Uwe Kleine-König [not found] ` <20101220083120.GP1940-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> 2010-12-20 10:00 ` Marc Reilly 2010-12-20 10:00 ` Marc Reilly [not found] ` <201012202100.29212.marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org> 2010-12-20 11:48 ` Mark Brown 2010-12-20 11:48 ` Mark Brown 2010-12-29 7:40 ` Grant Likely 2010-12-29 7:40 ` Grant Likely 2010-12-20 3:50 ` [PATCHv3 2/4] mc13xxx: Add spi driver Marc Reilly 2010-12-20 3:50 ` Marc Reilly 2010-12-20 3:50 ` Marc Reilly [this message] 2010-12-20 3:50 ` [PATCHv3 3/4] mc13xxx: Add i2c driver Marc Reilly 2010-12-20 3:50 ` [PATCHv3 4/4] mc13xxx: Add i2c and spi drivers to Kconfig and Makefile Marc Reilly 2010-12-20 3:50 ` Marc Reilly [not found] ` <1292817055-17715-5-git-send-email-marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org> 2010-12-20 8:38 ` Uwe Kleine-König 2010-12-20 8:38 ` Uwe Kleine-König [not found] ` <20101220083839.GQ1940-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> 2010-12-20 10:22 ` Marc Reilly 2010-12-20 10:22 ` Marc Reilly 2011-01-04 1:01 ` mc13xxx core support for i2c Ben Dooks 2011-01-04 1:01 ` Ben Dooks
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1292817055-17715-4-git-send-email-marc@cpdesign.com.au \ --to=marc-dte7ei5u7kg0n/f98k4iww@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \ --cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \ --cc=w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.