All of lore.kernel.org
 help / color / mirror / Atom feed
From: Artem Bityutskiy <dedekind1@gmail.com>
To: Matthieu CASTET <matthieu.castet@parrot.com>
Cc: "Murali Nalajala" <mnalajal@codeaurora.org>,
	"linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>,
	"Dima Zavin" <dima@android.com>,
	"Arve Hjønnevåg" <arve@android.com>,
	"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	"Brian Swetland" <swetland@google.com>,
	"dwmw2@infradead.org" <dwmw2@infradead.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.
Date: Mon, 18 Apr 2011 10:56:06 +0300	[thread overview]
Message-ID: <1303113366.2815.31.camel@localhost> (raw)
In-Reply-To: <4DABE8FE.5040300@parrot.com>

On Mon, 2011-04-18 at 09:32 +0200, Matthieu CASTET wrote:
> Hi,
> 
> Murali Nalajala a écrit :
> > Add initial msm nand driver support for Qualcomm MSM platforms.
> > This driver is capable of handling both 2k and 4k page support
> > nand devices.
> > 
> > This driver was originally developed by Arve Hjønnevåg at google.
> > Its source is available at
> > http://android.git.kernel.org/?p=kernel/msm.git under
> > android-msm-2.6.35 branch.
> > 
> > CC: Dima Zavin <dima@android.com>
> > CC: Brian Swetland <swetland@google.com>
> > CC: Arve Hjønnevåg <arve@android.com>
> > Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
> > ---
> > Changes in V2
> > * Turn most of the pr_info() calls into pr_debug().
> > 
> >  drivers/mtd/devices/Kconfig    |   11 +
> >  drivers/mtd/devices/Makefile   |    1 +
> >  drivers/mtd/devices/msm_nand.c | 1597 ++++++++++++++++++++++++++++++++++++++++
> >  drivers/mtd/devices/msm_nand.h |   77 ++
> >  4 files changed, 1686 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/mtd/devices/msm_nand.c
> >  create mode 100644 drivers/mtd/devices/msm_nand.h
> > 
> 
> For the record, I am not sure it is a great idea to make nand drivers
> independent of the nand layer.

This is not acceptable. Nand drivers should use the nand_base framework.
If the framework is limiting, buggy, slow, etc for your case (which is
quite possible) - the framework should be improved.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)

WARNING: multiple messages have this Message-ID (diff)
From: Artem Bityutskiy <dedekind1@gmail.com>
To: Matthieu CASTET <matthieu.castet@parrot.com>
Cc: "linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>,
	"Dima Zavin" <dima@android.com>,
	"Arve Hjønnevåg" <arve@android.com>,
	"Murali Nalajala" <mnalajal@codeaurora.org>,
	"Brian Swetland" <swetland@google.com>,
	"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	"dwmw2@infradead.org" <dwmw2@infradead.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.
Date: Mon, 18 Apr 2011 10:56:06 +0300	[thread overview]
Message-ID: <1303113366.2815.31.camel@localhost> (raw)
In-Reply-To: <4DABE8FE.5040300@parrot.com>

On Mon, 2011-04-18 at 09:32 +0200, Matthieu CASTET wrote:
> Hi,
> 
> Murali Nalajala a écrit :
> > Add initial msm nand driver support for Qualcomm MSM platforms.
> > This driver is capable of handling both 2k and 4k page support
> > nand devices.
> > 
> > This driver was originally developed by Arve Hjønnevåg at google.
> > Its source is available at
> > http://android.git.kernel.org/?p=kernel/msm.git under
> > android-msm-2.6.35 branch.
> > 
> > CC: Dima Zavin <dima@android.com>
> > CC: Brian Swetland <swetland@google.com>
> > CC: Arve Hjønnevåg <arve@android.com>
> > Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
> > ---
> > Changes in V2
> > * Turn most of the pr_info() calls into pr_debug().
> > 
> >  drivers/mtd/devices/Kconfig    |   11 +
> >  drivers/mtd/devices/Makefile   |    1 +
> >  drivers/mtd/devices/msm_nand.c | 1597 ++++++++++++++++++++++++++++++++++++++++
> >  drivers/mtd/devices/msm_nand.h |   77 ++
> >  4 files changed, 1686 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/mtd/devices/msm_nand.c
> >  create mode 100644 drivers/mtd/devices/msm_nand.h
> > 
> 
> For the record, I am not sure it is a great idea to make nand drivers
> independent of the nand layer.

This is not acceptable. Nand drivers should use the nand_base framework.
If the framework is limiting, buggy, slow, etc for your case (which is
quite possible) - the framework should be improved.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)

WARNING: multiple messages have this Message-ID (diff)
From: dedekind1@gmail.com (Artem Bityutskiy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.
Date: Mon, 18 Apr 2011 10:56:06 +0300	[thread overview]
Message-ID: <1303113366.2815.31.camel@localhost> (raw)
In-Reply-To: <4DABE8FE.5040300@parrot.com>

On Mon, 2011-04-18 at 09:32 +0200, Matthieu CASTET wrote:
> Hi,
> 
> Murali Nalajala a ?crit :
> > Add initial msm nand driver support for Qualcomm MSM platforms.
> > This driver is capable of handling both 2k and 4k page support
> > nand devices.
> > 
> > This driver was originally developed by Arve Hj?nnev?g at google.
> > Its source is available at
> > http://android.git.kernel.org/?p=kernel/msm.git under
> > android-msm-2.6.35 branch.
> > 
> > CC: Dima Zavin <dima@android.com>
> > CC: Brian Swetland <swetland@google.com>
> > CC: Arve Hj?nnev?g <arve@android.com>
> > Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
> > ---
> > Changes in V2
> > * Turn most of the pr_info() calls into pr_debug().
> > 
> >  drivers/mtd/devices/Kconfig    |   11 +
> >  drivers/mtd/devices/Makefile   |    1 +
> >  drivers/mtd/devices/msm_nand.c | 1597 ++++++++++++++++++++++++++++++++++++++++
> >  drivers/mtd/devices/msm_nand.h |   77 ++
> >  4 files changed, 1686 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/mtd/devices/msm_nand.c
> >  create mode 100644 drivers/mtd/devices/msm_nand.h
> > 
> 
> For the record, I am not sure it is a great idea to make nand drivers
> independent of the nand layer.

This is not acceptable. Nand drivers should use the nand_base framework.
If the framework is limiting, buggy, slow, etc for your case (which is
quite possible) - the framework should be improved.

-- 
Best Regards,
Artem Bityutskiy (????? ????????)

  reply	other threads:[~2011-04-18  7:59 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-16  7:17 [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support Murali Nalajala
2011-07-08 16:50 ` Murali Nalajala
2011-04-16  7:17 ` Murali Nalajala
2011-04-18  7:32 ` Matthieu CASTET
2011-04-18  7:32   ` Matthieu CASTET
2011-04-18  7:32   ` Matthieu CASTET
2011-04-18  7:56   ` Artem Bityutskiy [this message]
2011-04-18  7:56     ` Artem Bityutskiy
2011-04-18  7:56     ` Artem Bityutskiy
2011-04-26 12:57   ` Murali Nalajala
2011-04-26 12:57     ` Murali Nalajala
2011-04-26 12:57     ` Murali Nalajala
2011-04-27 12:38     ` Matthieu CASTET
2011-04-27 12:38       ` Matthieu CASTET
2011-04-27 12:38       ` Matthieu CASTET
2011-04-27 16:04       ` Murali Nalajala
2011-04-27 16:04         ` Murali Nalajala
2011-04-27 16:04         ` Murali Nalajala
2011-04-27 17:36         ` David Brown
2011-04-27 17:36           ` David Brown
2011-04-27 17:36           ` David Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1303113366.2815.31.camel@localhost \
    --to=dedekind1@gmail.com \
    --cc=arve@android.com \
    --cc=dima@android.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=matthieu.castet@parrot.com \
    --cc=mnalajal@codeaurora.org \
    --cc=swetland@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.