All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [RFC PATCH 3/3] ARM: gic: add OF based initialization
Date: Tue,  9 Aug 2011 15:17:00 -0500	[thread overview]
Message-ID: <1312921020-6820-4-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1312921020-6820-1-git-send-email-robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>

This adds gic initialization using device tree data. An example device tree
binding looks like this:

intc: interrupt-controller@fff11000 {
        compatible = "arm,cortex-a9-gic";
        #interrupt-cells = <1>;
        interrupt-controller;
        reg = <0xfff11000 0x1000>,
              <0xfff10100 0x100>;
};

Signed-off-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/gic.txt |   28 ++++++++++++++++++++
 arch/arm/common/gic.c                         |   34 +++++++++++++++++++++++++
 arch/arm/include/asm/hardware/gic.h           |    2 +
 3 files changed, 64 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/gic.txt

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
new file mode 100644
index 0000000..78012e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -0,0 +1,28 @@
+* ARM Generic Interrupt Controller
+
+Some ARM cores have an interrupt controller called GIC. The ARM GIC
+representation in the device tree should be done as under:-
+
+Required properties:
+
+- compatible : should be one of:
+	"arm,cortex-a9-gic"
+	"arm,arm11mp-gic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source.  The type shall be a <u32> and the value shall be 1.
+- reg : Specifies base physical address(s) and size of the GIC registers. The
+  first 2 values are the GIC distributor register base and size. The 2nd 2
+  values are the GIC cpu interface register base and size.
+
+Example:
+
+intc: interrupt-controller@fff11000 {
+        compatible = "arm,cortex-a9-gic";
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        reg = <0xfff11000 0x1000>,
+              <0xfff10100 0x100>;
+};
+
+
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index f13298e..0626bb7 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -28,6 +28,10 @@
 #include <linux/smp.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
 
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -394,3 +398,33 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 	writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif
+
+#ifdef CONFIG_OF
+static int gic_cnt __initdata = 0;
+
+void __init gic_of_init(struct of_intc_desc *d)
+{
+	struct device_node *np = d->controller;
+	void __iomem *cpu_base;
+	void __iomem *dist_base;
+	int irq;
+
+	if (WARN_ON(!d || !d->controller))
+		return;
+
+	dist_base = of_iomap(np, 0);
+	WARN(!dist_base, "unable to map gic dist registers\n");
+
+	cpu_base = of_iomap(np, 1);
+	WARN(!cpu_base, "unable to map gic cpu registers\n");
+
+	gic_init(gic_cnt, d->irq_base, dist_base, cpu_base);
+	irq_domain_add_simple(d->controller, d->irq_base);
+
+	if (d->parent) {
+		irq = irq_of_parse_and_map(np, 0);
+		gic_cascade_irq(gic_cnt, irq);
+	}
+	gic_cnt++;
+}
+#endif
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 435d3f8..64ef90d 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -37,6 +37,8 @@ extern void __iomem *gic_cpu_base_addr;
 extern struct irq_chip gic_arch_extn;
 
 void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
+struct of_intc_desc;
+void gic_of_init(struct of_intc_desc *d);
 void gic_secondary_init(unsigned int);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-- 
1.7.4.1

WARNING: multiple messages have this Message-ID (diff)
From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 3/3] ARM: gic: add OF based initialization
Date: Tue,  9 Aug 2011 15:17:00 -0500	[thread overview]
Message-ID: <1312921020-6820-4-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1312921020-6820-1-git-send-email-robherring2@gmail.com>

From: Rob Herring <rob.herring@calxeda.com>

This adds gic initialization using device tree data. An example device tree
binding looks like this:

intc: interrupt-controller at fff11000 {
        compatible = "arm,cortex-a9-gic";
        #interrupt-cells = <1>;
        interrupt-controller;
        reg = <0xfff11000 0x1000>,
              <0xfff10100 0x100>;
};

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
 Documentation/devicetree/bindings/arm/gic.txt |   28 ++++++++++++++++++++
 arch/arm/common/gic.c                         |   34 +++++++++++++++++++++++++
 arch/arm/include/asm/hardware/gic.h           |    2 +
 3 files changed, 64 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/gic.txt

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
new file mode 100644
index 0000000..78012e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -0,0 +1,28 @@
+* ARM Generic Interrupt Controller
+
+Some ARM cores have an interrupt controller called GIC. The ARM GIC
+representation in the device tree should be done as under:-
+
+Required properties:
+
+- compatible : should be one of:
+	"arm,cortex-a9-gic"
+	"arm,arm11mp-gic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source.  The type shall be a <u32> and the value shall be 1.
+- reg : Specifies base physical address(s) and size of the GIC registers. The
+  first 2 values are the GIC distributor register base and size. The 2nd 2
+  values are the GIC cpu interface register base and size.
+
+Example:
+
+intc: interrupt-controller at fff11000 {
+        compatible = "arm,cortex-a9-gic";
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        reg = <0xfff11000 0x1000>,
+              <0xfff10100 0x100>;
+};
+
+
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index f13298e..0626bb7 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -28,6 +28,10 @@
 #include <linux/smp.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
 
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -394,3 +398,33 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 	writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif
+
+#ifdef CONFIG_OF
+static int gic_cnt __initdata = 0;
+
+void __init gic_of_init(struct of_intc_desc *d)
+{
+	struct device_node *np = d->controller;
+	void __iomem *cpu_base;
+	void __iomem *dist_base;
+	int irq;
+
+	if (WARN_ON(!d || !d->controller))
+		return;
+
+	dist_base = of_iomap(np, 0);
+	WARN(!dist_base, "unable to map gic dist registers\n");
+
+	cpu_base = of_iomap(np, 1);
+	WARN(!cpu_base, "unable to map gic cpu registers\n");
+
+	gic_init(gic_cnt, d->irq_base, dist_base, cpu_base);
+	irq_domain_add_simple(d->controller, d->irq_base);
+
+	if (d->parent) {
+		irq = irq_of_parse_and_map(np, 0);
+		gic_cascade_irq(gic_cnt, irq);
+	}
+	gic_cnt++;
+}
+#endif
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 435d3f8..64ef90d 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -37,6 +37,8 @@ extern void __iomem *gic_cpu_base_addr;
 extern struct irq_chip gic_arch_extn;
 
 void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
+struct of_intc_desc;
+void gic_of_init(struct of_intc_desc *d);
 void gic_secondary_init(unsigned int);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-- 
1.7.4.1

  parent reply	other threads:[~2011-08-09 20:17 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-09 20:16 [RFC PATCH 0/3] Yet another GIC OF binding series Rob Herring
2011-08-09 20:16 ` Rob Herring
     [not found] ` <1312921020-6820-1-git-send-email-robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-08-09 20:16   ` [RFC PATCH 1/3] dt: irq: add interrupt controller descriptor struct Rob Herring
2011-08-09 20:16     ` Rob Herring
     [not found]     ` <1312921020-6820-2-git-send-email-robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-08-10 13:14       ` Jamie Iles
2011-08-10 13:14         ` Jamie Iles
2011-08-10 13:23         ` Rob Herring
2011-08-10 13:23           ` Rob Herring
2011-08-09 20:16   ` [RFC PATCH 2/3] ARM: gic: allow irq_start to be 0 Rob Herring
2011-08-09 20:16     ` Rob Herring
2011-08-09 20:17   ` Rob Herring [this message]
2011-08-09 20:17     ` [RFC PATCH 3/3] ARM: gic: add OF based initialization Rob Herring
2011-08-10  8:08     ` Marc Zyngier
2011-08-10  8:08       ` Marc Zyngier
     [not found]       ` <4E423C98.3040305-5wv7dgnIgG8@public.gmane.org>
2011-08-10 18:30         ` Rob Herring
2011-08-10 18:30           ` Rob Herring
2011-09-03 13:34   ` [RFC PATCH 0/3] Yet another GIC OF binding series Thomas Abraham
2011-09-03 13:34     ` Thomas Abraham
2011-08-25 21:49 ` [PATCH v2] ARM: gic: add OF based initialization Rob Herring
2011-08-25 21:49   ` Rob Herring
2011-08-26  2:37   ` Rob Herring
2011-08-26  2:37     ` Rob Herring
2011-08-30  3:26 ` [RFC PATCH 0/3] Yet another GIC OF binding series Shawn Guo
2011-08-30  3:26   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1312921020-6820-4-git-send-email-robherring2@gmail.com \
    --to=robherring2-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.