From: Kevin Hilman <khilman@ti.com>
To: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/22] OMAP2+: voltage: move PRCM mod offets into VC/VP structures
Date: Mon, 29 Aug 2011 10:35:35 -0700 [thread overview]
Message-ID: <1314639355-12713-3-git-send-email-khilman@ti.com> (raw)
In-Reply-To: <1314639355-12713-1-git-send-email-khilman@ti.com>
Eliminate need for global variables for the various PRM module offsets by
making them part of the VP/VC common structures
Eventually, these will likely be moved again, or more likely removed
when VP/VC code is isolated, but for now just getting rid of them as
global variabes so that the voltage domain initialization can be
cleaned up.
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
arch/arm/mach-omap2/vc.h | 2 +
arch/arm/mach-omap2/vc3xxx_data.c | 1 +
arch/arm/mach-omap2/vc44xx_data.c | 1 +
arch/arm/mach-omap2/voltage.c | 109 ++++++++++++-------------
arch/arm/mach-omap2/voltage.h | 6 +-
arch/arm/mach-omap2/voltagedomains3xxx_data.c | 8 +-
arch/arm/mach-omap2/voltagedomains44xx_data.c | 9 +-
arch/arm/mach-omap2/vp.h | 2 +
arch/arm/mach-omap2/vp3xxx_data.c | 1 +
arch/arm/mach-omap2/vp44xx_data.c | 1 +
10 files changed, 70 insertions(+), 70 deletions(-)
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index e776777..f7338af 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -23,6 +23,7 @@
* struct omap_vc_common_data - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
+ * @prm_mod: PRM module id used for PRM register access
* @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
* @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
@@ -40,6 +41,7 @@
struct omap_vc_common_data {
u32 cmd_on_mask;
u32 valid;
+ s16 prm_mod;
u8 smps_sa_reg;
u8 smps_volra_reg;
u8 bypass_val_reg;
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index f37dc4b..55caccb 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -30,6 +30,7 @@
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static struct omap_vc_common_data omap3_vc_common = {
+ .prm_mod = OMAP3430_GR_MOD,
.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index a98da8d..b62678e 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -31,6 +31,7 @@
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static const struct omap_vc_common_data omap4_vc_common = {
+ .prm_mod = OMAP4430_PRM_DEVICE_INST,
.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 9ef3789..3151d75 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -50,10 +50,6 @@ static struct omap_vdd_info **vdd_info;
*/
static int nr_scalable_vdd;
-/* XXX document */
-static s16 prm_mod_offs;
-static s16 prm_irqst_ocp_mod_offs;
-
static struct dentry *voltage_dir;
/* Init function pointers */
@@ -147,7 +143,7 @@ static int vp_volt_debug_get(void *data, u64 *val)
return -EINVAL;
}
- vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
+ vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
if (!vdd->pmic_info->vsel_to_uv) {
pr_warning("PMIC function to convert vsel to voltage"
@@ -197,19 +193,19 @@ static void vp_latch_vsel(struct omap_vdd_info *vdd)
vsel = vdd->pmic_info->uv_to_vsel(uvdc);
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask |
vdd->vp_data->vp_common->vpconfig_initvdd);
vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Trigger initVDD value copy to voltage processor */
vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd),
- prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Clear initVDD copy trigger bit */
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
}
/* Generic voltage init functions */
@@ -227,19 +223,19 @@ static void __init vp_init(struct omap_vdd_info *vdd)
(vdd->vp_rt_data.vpconfig_errorgain <<
vdd->vp_data->vp_common->vpconfig_errorgain_shift) |
vdd->vp_data->vp_common->vpconfig_timeouten;
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin <<
vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) |
(vdd->vp_rt_data.vstepmin_stepmin <<
vdd->vp_data->vp_common->vstepmin_stepmin_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmin);
vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax <<
vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) |
(vdd->vp_rt_data.vstepmax_stepmax <<
vdd->vp_data->vp_common->vstepmax_stepmax_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmax);
vp_val = ((vdd->vp_rt_data.vlimitto_vddmax <<
vdd->vp_data->vp_common->vlimitto_vddmax_shift) |
@@ -247,7 +243,7 @@ static void __init vp_init(struct omap_vdd_info *vdd)
vdd->vp_data->vp_common->vlimitto_vddmin_shift) |
(vdd->vp_rt_data.vlimitto_timeout <<
vdd->vp_data->vp_common->vlimitto_timeout_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vlimitto);
}
static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
@@ -336,23 +332,23 @@ static int _pre_volt_scale(struct omap_vdd_info *vdd,
volt_data = NULL;
*target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
- *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
+ *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
/* Setting the ON voltage to the new target voltage */
- vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg);
+ vc_cmdval = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
vc_cmdval &= ~vc_common->cmd_on_mask;
vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
- vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg);
+ vdd->write_reg(vc_cmdval, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
/* Setting vp errorgain based on the voltage */
if (volt_data) {
- vp_errgain_val = vdd->read_reg(prm_mod_offs,
+ vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod,
vdd->vp_data->vpconfig);
vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
vp_common->vpconfig_errorgain_shift;
- vdd->write_reg(vp_errgain_val, prm_mod_offs,
+ vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod,
vdd->vp_data->vpconfig);
}
@@ -394,11 +390,11 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
(vdd->pmic_info->i2c_slave_addr <<
vdd->vc_data->vc_common->slaveaddr_shift);
- vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg);
- vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs,
+ vdd->write_reg(vc_bypass_value, vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg);
+ vdd->write_reg(vc_bypass_value | vc_valid, vdd->vc_data->vc_common->prm_mod,
vc_bypass_val_reg);
- vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg);
+ vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg);
/*
* Loop till the bypass command is acknowledged from the SMPS.
* NOTE: This is legacy code. The loop count and retry count needs
@@ -417,7 +413,7 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
loop_cnt = 0;
udelay(10);
}
- vc_bypass_value = vdd->read_reg(prm_mod_offs,
+ vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
vc_bypass_val_reg);
}
@@ -445,8 +441,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
*/
while (timeout++ < VP_TRANXDONE_TIMEOUT) {
vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
+ vdd->prm_irqst_mod, prm_irqst_reg);
+ if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) &
vdd->vp_data->prm_irqst_data->tranxdone_status))
break;
udelay(1);
@@ -458,28 +454,28 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
}
/* Configure for VP-Force Update */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd |
vdd->vp_data->vp_common->vpconfig_forceupdate |
vdd->vp_data->vp_common->vpconfig_initvoltage_mask);
vpconfig |= ((target_vsel <<
vdd->vp_data->vp_common->vpconfig_initvoltage_shift));
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Trigger initVDD value copy to voltage processor */
vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Force update of voltage */
vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/*
* Wait for TransactionDone. Typical latency is <200us.
* Depends on SMPSWAITTIMEMIN/MAX and voltage change
*/
timeout = 0;
- omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
+ omap_test_timeout((vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) &
vdd->vp_data->prm_irqst_data->tranxdone_status),
VP_TRANXDONE_TIMEOUT, timeout);
if (timeout >= VP_TRANXDONE_TIMEOUT)
@@ -496,8 +492,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
timeout = 0;
while (timeout++ < VP_TRANXDONE_TIMEOUT) {
vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
+ vdd->prm_irqst_mod, prm_irqst_reg);
+ if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) &
vdd->vp_data->prm_irqst_data->tranxdone_status))
break;
udelay(1);
@@ -508,13 +504,13 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
"to clear the TRANXDONE status\n",
__func__, vdd->voltdm.name);
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Clear initVDD copy trigger bit */
vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Clear force bit */
vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
return 0;
}
@@ -525,10 +521,10 @@ static void __init omap3_vfsm_init(struct omap_vdd_info *vdd)
* Voltage Manager FSM parameters init
* XXX This data should be passed in from the board file
*/
- vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET);
- vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs,
+ vdd->write_reg(OMAP3_CLKSETUP, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET);
+ vdd->write_reg(OMAP3_VOLTOFFSET, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VOLTOFFSET_OFFSET);
- vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs,
+ vdd->write_reg(OMAP3_VOLTSETUP2, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VOLTSETUP2_OFFSET);
}
@@ -550,15 +546,15 @@ static void __init omap3_vc_init(struct omap_vdd_info *vdd)
(onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) |
(ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) |
(off_vsel << vdd->vc_data->vc_common->cmd_off_shift));
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
/*
* Generic VC parameters init
* XXX This data should be abstracted out
*/
- vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs,
+ vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VC_CH_CONF_OFFSET);
- vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs,
+ vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VC_I2C_CFG_OFFSET);
omap3_vfsm_init(vdd);
@@ -585,11 +581,11 @@ static void __init omap4_vc_init(struct omap_vdd_info *vdd)
vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
/* XXX These are magic numbers and do not belong! */
vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
is_initialized = true;
}
@@ -612,27 +608,27 @@ static void __init omap_vc_init(struct omap_vdd_info *vdd)
}
/* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
+ vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_sa_reg);
vc_val &= ~vdd->vc_data->smps_sa_mask;
vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_sa_reg);
/* Setup the VOLRA(pmic reg addr) in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
+ vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_volra_reg);
vc_val &= ~vdd->vc_data->smps_volra_mask;
vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_volra_reg);
/* Configure the setup times */
- vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg);
+ vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
vc_val &= ~vdd->vfsm->voltsetup_mask;
vc_val |= vdd->pmic_info->volt_setup_time <<
vdd->vfsm->voltsetup_shift;
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
if (cpu_is_omap34xx())
omap3_vc_init(vdd);
@@ -713,7 +709,7 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
return 0;
}
- curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
+ curr_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
pr_warning("%s: PMIC function to convert vsel to voltage"
@@ -755,9 +751,9 @@ void omap_vp_enable(struct voltagedomain *voltdm)
vp_latch_vsel(vdd);
/* Enable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vdd->vp_enabled = true;
}
@@ -794,14 +790,14 @@ void omap_vp_disable(struct voltagedomain *voltdm)
}
/* Disable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/*
* Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
*/
- omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)),
+ omap_test_timeout((vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstatus)),
VP_IDLE_TIMEOUT, timeout);
if (timeout >= VP_IDLE_TIMEOUT)
@@ -1094,12 +1090,9 @@ int __init omap_voltage_late_init(void)
}
/* XXX document */
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod,
- struct omap_vdd_info *omap_vdd_array[],
+int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[],
u8 omap_vdd_count)
{
- prm_mod_offs = prm_mod;
- prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod;
vdd_info = omap_vdd_array;
nr_scalable_vdd = omap_vdd_count;
return 0;
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index e9f5408..ffdc55e 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -119,6 +119,7 @@ struct omap_volt_pmic_info {
* @voltdm : pointer to the voltage domain structure
* @debug_dir : debug directory for this voltage domain.
* @curr_volt : current voltage for this vdd.
+ * @prm_irqst_mod : PRM module id used for PRM IRQ status register access
* @vp_enabled : flag to keep track of whether vp is enabled or not
* @volt_scale : API to scale the voltage of the vdd.
*/
@@ -133,6 +134,8 @@ struct omap_vdd_info {
struct dentry *debug_dir;
u32 curr_volt;
bool vp_enabled;
+
+ s16 prm_irqst_mod;
u32 (*read_reg) (u16 mod, u8 offset);
void (*write_reg) (u32 val, u16 mod, u8 offset);
int (*volt_scale) (struct omap_vdd_info *vdd,
@@ -151,8 +154,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod,
- struct omap_vdd_info *omap_vdd_array[],
+int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[],
u8 omap_vdd_count);
#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index def230f..0d30b7f 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -38,6 +38,7 @@ static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = {
};
static struct omap_vdd_info omap3_vdd1_info = {
+ .prm_irqst_mod = OCP_MOD,
.vp_data = &omap3_vp1_data,
.vc_data = &omap3_vc1_data,
.vfsm = &omap3_vdd1_vfsm_data,
@@ -53,6 +54,7 @@ static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = {
};
static struct omap_vdd_info omap3_vdd2_info = {
+ .prm_irqst_mod = OCP_MOD,
.vp_data = &omap3_vp2_data,
.vc_data = &omap3_vc2_data,
.vfsm = &omap3_vdd2_vfsm_data,
@@ -70,9 +72,6 @@ static struct omap_vdd_info *omap3_vdd_info[] = {
/* OMAP3 specific voltage init functions */
static int __init omap3xxx_voltage_early_init(void)
{
- s16 prm_mod = OMAP3430_GR_MOD;
- s16 prm_irqst_ocp_mod = OCP_MOD;
-
if (!cpu_is_omap34xx())
return 0;
@@ -88,8 +87,7 @@ static int __init omap3xxx_voltage_early_init(void)
omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data;
}
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap3_vdd_info,
+ return omap_voltage_early_init(omap3_vdd_info,
ARRAY_SIZE(omap3_vdd_info));
};
core_initcall(omap3xxx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index cb64996..1c2d7d7 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -37,6 +37,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = {
};
static struct omap_vdd_info omap4_vdd_mpu_info = {
+ .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.vp_data = &omap4_vp_mpu_data,
.vc_data = &omap4_vc_mpu_data,
.vfsm = &omap4_vdd_mpu_vfsm_data,
@@ -50,6 +51,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = {
};
static struct omap_vdd_info omap4_vdd_iva_info = {
+ .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.vp_data = &omap4_vp_iva_data,
.vc_data = &omap4_vc_iva_data,
.vfsm = &omap4_vdd_iva_vfsm_data,
@@ -63,6 +65,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = {
};
static struct omap_vdd_info omap4_vdd_core_info = {
+ .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.vp_data = &omap4_vp_core_data,
.vc_data = &omap4_vc_core_data,
.vfsm = &omap4_vdd_core_vfsm_data,
@@ -81,9 +84,6 @@ static struct omap_vdd_info *omap4_vdd_info[] = {
/* OMAP4 specific voltage init functions */
static int __init omap44xx_voltage_early_init(void)
{
- s16 prm_mod = OMAP4430_PRM_DEVICE_INST;
- s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
-
if (!cpu_is_omap44xx())
return 0;
@@ -95,8 +95,7 @@ static int __init omap44xx_voltage_early_init(void)
omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap4_vdd_info,
+ return omap_voltage_early_init(omap4_vdd_info,
ARRAY_SIZE(omap4_vdd_info));
};
core_initcall(omap44xx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 7ce134f..d277da6 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -42,6 +42,7 @@
* @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
* @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
* @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
+ * @prm_mod: PRM module id used for PRM register access
*
* XXX It it not necessary to have both a mask and a shift for the same
* bitfield - remove one
@@ -54,6 +55,7 @@ struct omap_vp_common_data {
u32 vpconfig_initvdd;
u32 vpconfig_forceupdate;
u32 vpconfig_vpenable;
+ s16 prm_mod;
u8 vpconfig_erroroffset_shift;
u8 vpconfig_errorgain_shift;
u8 vpconfig_initvoltage_shift;
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 6452170..c9b3e64 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -31,6 +31,7 @@
* XXX This stuff presumably belongs in the vp3xxx.c or vp.c file.
*/
static const struct omap_vp_common_data omap3_vp_common = {
+ .prm_mod = OMAP3430_GR_MOD,
.vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT,
.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK,
.vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT,
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index 65d1ad6..1a0842e 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -32,6 +32,7 @@
* XXX This stuff presumably belongs in the vp44xx.c or vp.c file.
*/
static const struct omap_vp_common_data omap4_vp_common = {
+ .prm_mod = OMAP4430_PRM_DEVICE_INST,
.vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT,
.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK,
.vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT,
--
1.7.6
WARNING: multiple messages have this Message-ID (diff)
From: khilman@ti.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/22] OMAP2+: voltage: move PRCM mod offets into VC/VP structures
Date: Mon, 29 Aug 2011 10:35:35 -0700 [thread overview]
Message-ID: <1314639355-12713-3-git-send-email-khilman@ti.com> (raw)
In-Reply-To: <1314639355-12713-1-git-send-email-khilman@ti.com>
Eliminate need for global variables for the various PRM module offsets by
making them part of the VP/VC common structures
Eventually, these will likely be moved again, or more likely removed
when VP/VC code is isolated, but for now just getting rid of them as
global variabes so that the voltage domain initialization can be
cleaned up.
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
arch/arm/mach-omap2/vc.h | 2 +
arch/arm/mach-omap2/vc3xxx_data.c | 1 +
arch/arm/mach-omap2/vc44xx_data.c | 1 +
arch/arm/mach-omap2/voltage.c | 109 ++++++++++++-------------
arch/arm/mach-omap2/voltage.h | 6 +-
arch/arm/mach-omap2/voltagedomains3xxx_data.c | 8 +-
arch/arm/mach-omap2/voltagedomains44xx_data.c | 9 +-
arch/arm/mach-omap2/vp.h | 2 +
arch/arm/mach-omap2/vp3xxx_data.c | 1 +
arch/arm/mach-omap2/vp44xx_data.c | 1 +
10 files changed, 70 insertions(+), 70 deletions(-)
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index e776777..f7338af 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -23,6 +23,7 @@
* struct omap_vc_common_data - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
+ * @prm_mod: PRM module id used for PRM register access
* @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
* @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
@@ -40,6 +41,7 @@
struct omap_vc_common_data {
u32 cmd_on_mask;
u32 valid;
+ s16 prm_mod;
u8 smps_sa_reg;
u8 smps_volra_reg;
u8 bypass_val_reg;
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index f37dc4b..55caccb 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -30,6 +30,7 @@
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static struct omap_vc_common_data omap3_vc_common = {
+ .prm_mod = OMAP3430_GR_MOD,
.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index a98da8d..b62678e 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -31,6 +31,7 @@
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static const struct omap_vc_common_data omap4_vc_common = {
+ .prm_mod = OMAP4430_PRM_DEVICE_INST,
.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 9ef3789..3151d75 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -50,10 +50,6 @@ static struct omap_vdd_info **vdd_info;
*/
static int nr_scalable_vdd;
-/* XXX document */
-static s16 prm_mod_offs;
-static s16 prm_irqst_ocp_mod_offs;
-
static struct dentry *voltage_dir;
/* Init function pointers */
@@ -147,7 +143,7 @@ static int vp_volt_debug_get(void *data, u64 *val)
return -EINVAL;
}
- vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
+ vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
if (!vdd->pmic_info->vsel_to_uv) {
pr_warning("PMIC function to convert vsel to voltage"
@@ -197,19 +193,19 @@ static void vp_latch_vsel(struct omap_vdd_info *vdd)
vsel = vdd->pmic_info->uv_to_vsel(uvdc);
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask |
vdd->vp_data->vp_common->vpconfig_initvdd);
vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Trigger initVDD value copy to voltage processor */
vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd),
- prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Clear initVDD copy trigger bit */
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
}
/* Generic voltage init functions */
@@ -227,19 +223,19 @@ static void __init vp_init(struct omap_vdd_info *vdd)
(vdd->vp_rt_data.vpconfig_errorgain <<
vdd->vp_data->vp_common->vpconfig_errorgain_shift) |
vdd->vp_data->vp_common->vpconfig_timeouten;
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin <<
vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) |
(vdd->vp_rt_data.vstepmin_stepmin <<
vdd->vp_data->vp_common->vstepmin_stepmin_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmin);
vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax <<
vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) |
(vdd->vp_rt_data.vstepmax_stepmax <<
vdd->vp_data->vp_common->vstepmax_stepmax_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmax);
vp_val = ((vdd->vp_rt_data.vlimitto_vddmax <<
vdd->vp_data->vp_common->vlimitto_vddmax_shift) |
@@ -247,7 +243,7 @@ static void __init vp_init(struct omap_vdd_info *vdd)
vdd->vp_data->vp_common->vlimitto_vddmin_shift) |
(vdd->vp_rt_data.vlimitto_timeout <<
vdd->vp_data->vp_common->vlimitto_timeout_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vlimitto);
}
static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
@@ -336,23 +332,23 @@ static int _pre_volt_scale(struct omap_vdd_info *vdd,
volt_data = NULL;
*target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
- *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
+ *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
/* Setting the ON voltage to the new target voltage */
- vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg);
+ vc_cmdval = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
vc_cmdval &= ~vc_common->cmd_on_mask;
vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
- vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg);
+ vdd->write_reg(vc_cmdval, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
/* Setting vp errorgain based on the voltage */
if (volt_data) {
- vp_errgain_val = vdd->read_reg(prm_mod_offs,
+ vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod,
vdd->vp_data->vpconfig);
vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
vp_common->vpconfig_errorgain_shift;
- vdd->write_reg(vp_errgain_val, prm_mod_offs,
+ vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod,
vdd->vp_data->vpconfig);
}
@@ -394,11 +390,11 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
(vdd->pmic_info->i2c_slave_addr <<
vdd->vc_data->vc_common->slaveaddr_shift);
- vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg);
- vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs,
+ vdd->write_reg(vc_bypass_value, vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg);
+ vdd->write_reg(vc_bypass_value | vc_valid, vdd->vc_data->vc_common->prm_mod,
vc_bypass_val_reg);
- vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg);
+ vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg);
/*
* Loop till the bypass command is acknowledged from the SMPS.
* NOTE: This is legacy code. The loop count and retry count needs
@@ -417,7 +413,7 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
loop_cnt = 0;
udelay(10);
}
- vc_bypass_value = vdd->read_reg(prm_mod_offs,
+ vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
vc_bypass_val_reg);
}
@@ -445,8 +441,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
*/
while (timeout++ < VP_TRANXDONE_TIMEOUT) {
vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
+ vdd->prm_irqst_mod, prm_irqst_reg);
+ if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) &
vdd->vp_data->prm_irqst_data->tranxdone_status))
break;
udelay(1);
@@ -458,28 +454,28 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
}
/* Configure for VP-Force Update */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd |
vdd->vp_data->vp_common->vpconfig_forceupdate |
vdd->vp_data->vp_common->vpconfig_initvoltage_mask);
vpconfig |= ((target_vsel <<
vdd->vp_data->vp_common->vpconfig_initvoltage_shift));
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Trigger initVDD value copy to voltage processor */
vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Force update of voltage */
vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/*
* Wait for TransactionDone. Typical latency is <200us.
* Depends on SMPSWAITTIMEMIN/MAX and voltage change
*/
timeout = 0;
- omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
+ omap_test_timeout((vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) &
vdd->vp_data->prm_irqst_data->tranxdone_status),
VP_TRANXDONE_TIMEOUT, timeout);
if (timeout >= VP_TRANXDONE_TIMEOUT)
@@ -496,8 +492,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
timeout = 0;
while (timeout++ < VP_TRANXDONE_TIMEOUT) {
vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
+ vdd->prm_irqst_mod, prm_irqst_reg);
+ if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) &
vdd->vp_data->prm_irqst_data->tranxdone_status))
break;
udelay(1);
@@ -508,13 +504,13 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
"to clear the TRANXDONE status\n",
__func__, vdd->voltdm.name);
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Clear initVDD copy trigger bit */
vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Clear force bit */
vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
return 0;
}
@@ -525,10 +521,10 @@ static void __init omap3_vfsm_init(struct omap_vdd_info *vdd)
* Voltage Manager FSM parameters init
* XXX This data should be passed in from the board file
*/
- vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET);
- vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs,
+ vdd->write_reg(OMAP3_CLKSETUP, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET);
+ vdd->write_reg(OMAP3_VOLTOFFSET, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VOLTOFFSET_OFFSET);
- vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs,
+ vdd->write_reg(OMAP3_VOLTSETUP2, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VOLTSETUP2_OFFSET);
}
@@ -550,15 +546,15 @@ static void __init omap3_vc_init(struct omap_vdd_info *vdd)
(onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) |
(ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) |
(off_vsel << vdd->vc_data->vc_common->cmd_off_shift));
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
/*
* Generic VC parameters init
* XXX This data should be abstracted out
*/
- vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs,
+ vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VC_CH_CONF_OFFSET);
- vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs,
+ vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VC_I2C_CFG_OFFSET);
omap3_vfsm_init(vdd);
@@ -585,11 +581,11 @@ static void __init omap4_vc_init(struct omap_vdd_info *vdd)
vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
/* XXX These are magic numbers and do not belong! */
vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
is_initialized = true;
}
@@ -612,27 +608,27 @@ static void __init omap_vc_init(struct omap_vdd_info *vdd)
}
/* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
+ vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_sa_reg);
vc_val &= ~vdd->vc_data->smps_sa_mask;
vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_sa_reg);
/* Setup the VOLRA(pmic reg addr) in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
+ vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_volra_reg);
vc_val &= ~vdd->vc_data->smps_volra_mask;
vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_volra_reg);
/* Configure the setup times */
- vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg);
+ vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
vc_val &= ~vdd->vfsm->voltsetup_mask;
vc_val |= vdd->pmic_info->volt_setup_time <<
vdd->vfsm->voltsetup_shift;
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
if (cpu_is_omap34xx())
omap3_vc_init(vdd);
@@ -713,7 +709,7 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
return 0;
}
- curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
+ curr_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
pr_warning("%s: PMIC function to convert vsel to voltage"
@@ -755,9 +751,9 @@ void omap_vp_enable(struct voltagedomain *voltdm)
vp_latch_vsel(vdd);
/* Enable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vdd->vp_enabled = true;
}
@@ -794,14 +790,14 @@ void omap_vp_disable(struct voltagedomain *voltdm)
}
/* Disable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/*
* Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
*/
- omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)),
+ omap_test_timeout((vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstatus)),
VP_IDLE_TIMEOUT, timeout);
if (timeout >= VP_IDLE_TIMEOUT)
@@ -1094,12 +1090,9 @@ int __init omap_voltage_late_init(void)
}
/* XXX document */
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod,
- struct omap_vdd_info *omap_vdd_array[],
+int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[],
u8 omap_vdd_count)
{
- prm_mod_offs = prm_mod;
- prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod;
vdd_info = omap_vdd_array;
nr_scalable_vdd = omap_vdd_count;
return 0;
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index e9f5408..ffdc55e 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -119,6 +119,7 @@ struct omap_volt_pmic_info {
* @voltdm : pointer to the voltage domain structure
* @debug_dir : debug directory for this voltage domain.
* @curr_volt : current voltage for this vdd.
+ * @prm_irqst_mod : PRM module id used for PRM IRQ status register access
* @vp_enabled : flag to keep track of whether vp is enabled or not
* @volt_scale : API to scale the voltage of the vdd.
*/
@@ -133,6 +134,8 @@ struct omap_vdd_info {
struct dentry *debug_dir;
u32 curr_volt;
bool vp_enabled;
+
+ s16 prm_irqst_mod;
u32 (*read_reg) (u16 mod, u8 offset);
void (*write_reg) (u32 val, u16 mod, u8 offset);
int (*volt_scale) (struct omap_vdd_info *vdd,
@@ -151,8 +154,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod,
- struct omap_vdd_info *omap_vdd_array[],
+int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[],
u8 omap_vdd_count);
#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index def230f..0d30b7f 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -38,6 +38,7 @@ static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = {
};
static struct omap_vdd_info omap3_vdd1_info = {
+ .prm_irqst_mod = OCP_MOD,
.vp_data = &omap3_vp1_data,
.vc_data = &omap3_vc1_data,
.vfsm = &omap3_vdd1_vfsm_data,
@@ -53,6 +54,7 @@ static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = {
};
static struct omap_vdd_info omap3_vdd2_info = {
+ .prm_irqst_mod = OCP_MOD,
.vp_data = &omap3_vp2_data,
.vc_data = &omap3_vc2_data,
.vfsm = &omap3_vdd2_vfsm_data,
@@ -70,9 +72,6 @@ static struct omap_vdd_info *omap3_vdd_info[] = {
/* OMAP3 specific voltage init functions */
static int __init omap3xxx_voltage_early_init(void)
{
- s16 prm_mod = OMAP3430_GR_MOD;
- s16 prm_irqst_ocp_mod = OCP_MOD;
-
if (!cpu_is_omap34xx())
return 0;
@@ -88,8 +87,7 @@ static int __init omap3xxx_voltage_early_init(void)
omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data;
}
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap3_vdd_info,
+ return omap_voltage_early_init(omap3_vdd_info,
ARRAY_SIZE(omap3_vdd_info));
};
core_initcall(omap3xxx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index cb64996..1c2d7d7 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -37,6 +37,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = {
};
static struct omap_vdd_info omap4_vdd_mpu_info = {
+ .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.vp_data = &omap4_vp_mpu_data,
.vc_data = &omap4_vc_mpu_data,
.vfsm = &omap4_vdd_mpu_vfsm_data,
@@ -50,6 +51,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = {
};
static struct omap_vdd_info omap4_vdd_iva_info = {
+ .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.vp_data = &omap4_vp_iva_data,
.vc_data = &omap4_vc_iva_data,
.vfsm = &omap4_vdd_iva_vfsm_data,
@@ -63,6 +65,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = {
};
static struct omap_vdd_info omap4_vdd_core_info = {
+ .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.vp_data = &omap4_vp_core_data,
.vc_data = &omap4_vc_core_data,
.vfsm = &omap4_vdd_core_vfsm_data,
@@ -81,9 +84,6 @@ static struct omap_vdd_info *omap4_vdd_info[] = {
/* OMAP4 specific voltage init functions */
static int __init omap44xx_voltage_early_init(void)
{
- s16 prm_mod = OMAP4430_PRM_DEVICE_INST;
- s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
-
if (!cpu_is_omap44xx())
return 0;
@@ -95,8 +95,7 @@ static int __init omap44xx_voltage_early_init(void)
omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap4_vdd_info,
+ return omap_voltage_early_init(omap4_vdd_info,
ARRAY_SIZE(omap4_vdd_info));
};
core_initcall(omap44xx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 7ce134f..d277da6 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -42,6 +42,7 @@
* @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
* @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
* @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
+ * @prm_mod: PRM module id used for PRM register access
*
* XXX It it not necessary to have both a mask and a shift for the same
* bitfield - remove one
@@ -54,6 +55,7 @@ struct omap_vp_common_data {
u32 vpconfig_initvdd;
u32 vpconfig_forceupdate;
u32 vpconfig_vpenable;
+ s16 prm_mod;
u8 vpconfig_erroroffset_shift;
u8 vpconfig_errorgain_shift;
u8 vpconfig_initvoltage_shift;
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 6452170..c9b3e64 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -31,6 +31,7 @@
* XXX This stuff presumably belongs in the vp3xxx.c or vp.c file.
*/
static const struct omap_vp_common_data omap3_vp_common = {
+ .prm_mod = OMAP3430_GR_MOD,
.vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT,
.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK,
.vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT,
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index 65d1ad6..1a0842e 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -32,6 +32,7 @@
* XXX This stuff presumably belongs in the vp44xx.c or vp.c file.
*/
static const struct omap_vp_common_data omap4_vp_common = {
+ .prm_mod = OMAP4430_PRM_DEVICE_INST,
.vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT,
.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK,
.vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT,
--
1.7.6
next prev parent reply other threads:[~2011-08-29 17:35 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-29 17:35 [PATCH 00/22] OMAP: voltage cleanup part A Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 01/22] OMAP2+: hwmod: remove unused voltagedomain pointer Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman [this message]
2011-08-29 17:35 ` [PATCH 02/22] OMAP2+: voltage: move PRCM mod offets into VC/VP structures Kevin Hilman
2011-08-29 17:35 ` [PATCH 03/22] OMAP2+: voltage: move prm_irqst_reg from VP into voltage domain Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 04/22] OMAP2+: voltage: start towards a new voltagedomain layer Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 05/22] OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva" Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 06/22] OMAP3: voltagedomain data: add wakeup domain Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 07/22] OMAP3+: voltage: add scalable flag to voltagedomain Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 08/22] OMAP2+: powerdomain: add voltagedomain to struct powerdomain Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 09/22] OMAP2: add voltage domains and connect to powerdomains Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-09-07 10:39 ` Jean Pihet
2011-09-07 10:39 ` Jean Pihet
2011-09-09 21:41 ` Kevin Hilman
2011-09-09 21:41 ` Kevin Hilman
2011-09-09 21:46 ` Kevin Hilman
2011-09-09 21:46 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 10/22] OMAP3: powerdomain data: add voltage domains Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 11/22] OMAP4: " Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-09-07 9:04 ` Jean Pihet
2011-09-07 9:04 ` Jean Pihet
2011-09-09 21:48 ` Kevin Hilman
2011-09-09 21:48 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 12/22] OMAP2+: powerdomain: add voltage domain lookup during register Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 13/22] OMAP2+: voltage: keep track of powerdomains in each voltagedomain Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-09-07 9:23 ` Jean Pihet
2011-09-07 9:23 ` Jean Pihet
2011-09-09 21:52 ` Kevin Hilman
2011-09-09 21:52 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 14/22] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-09-07 10:42 ` Jean Pihet
2011-09-07 10:42 ` Jean Pihet
2011-09-09 21:51 ` Kevin Hilman
2011-09-09 21:51 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 15/22] OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 16/22] OMAP2+: voltage: enable VC bypass scale method when VC is initialized Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 17/22] OMAP2+: voltage: split out voltage processor (VP) code into new layer Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-09-07 9:52 ` Jean Pihet
2011-09-07 9:52 ` Jean Pihet
2011-08-29 17:35 ` [PATCH 18/22] OMAP2+: VC: support PMICs with separate voltage and command registers Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 19/22] OMAP2+: add PRM VP functions for checking/clearing VP TX done status Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 20/22] OMAP3+ VP: replace transaction done check/clear with VP ops Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 21/22] OMAP2+: PRM: add register access functions for VC/VP Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 22/22] OMAP3+: voltage: convert to PRM register access functions Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman
2011-09-07 19:12 ` [PATCH 00/22] OMAP: voltage cleanup part A Jean Pihet
2011-09-07 19:12 ` Jean Pihet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314639355-12713-3-git-send-email-khilman@ti.com \
--to=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.