From: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Cc: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>, Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>, Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>, Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>, Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>, Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>, Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> Subject: [PATCH 05/10 V2] mmc: spi: Pull out the SSP clock configuration function Date: Mon, 23 Jul 2012 22:40:47 +0200 [thread overview] Message-ID: <1343076052-27312-6-git-send-email-marex@denx.de> (raw) In-Reply-To: <1343076052-27312-1-git-send-email-marex-ynQEQJNshbs@public.gmane.org> Pull out the MMC clock configuration function and make it into SSP clock configuration function, so it can be used by the SPI driver too. Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org> Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org> CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Cc: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- drivers/clk/mxs/Makefile | 2 +- drivers/clk/mxs/clk-ssp.c | 62 +++++++++++++++++++++++++++++++++++++++++++ drivers/mmc/host/mxs-mmc.c | 39 +-------------------------- include/linux/spi/mxs-spi.h | 2 ++ 4 files changed, 66 insertions(+), 39 deletions(-) create mode 100644 drivers/clk/mxs/clk-ssp.c V2: Add EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate); to allow compiling as a module. (Thanks to Attila Kinali). diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile index 7bedeec..a6a2223 100644 --- a/drivers/clk/mxs/Makefile +++ b/drivers/clk/mxs/Makefile @@ -2,7 +2,7 @@ # Makefile for mxs specific clk # -obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o +obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o clk-ssp.o obj-$(CONFIG_SOC_IMX23) += clk-imx23.o obj-$(CONFIG_SOC_IMX28) += clk-imx28.o diff --git a/drivers/clk/mxs/clk-ssp.c b/drivers/clk/mxs/clk-ssp.c new file mode 100644 index 0000000..af7bdbf --- /dev/null +++ b/drivers/clk/mxs/clk-ssp.c @@ -0,0 +1,62 @@ +/* + * Copyright 2012 DENX Software Engineering, GmbH + * + * Pulled from code: + * Portions copyright (C) 2003 Russell King, PXA MMCI Driver + * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver + * + * Copyright 2008 Embedded Alley Solutions, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/spi/mxs-spi.h> + +void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate) +{ + unsigned int ssp_clk, ssp_sck; + u32 clock_divide, clock_rate; + u32 val; + + ssp_clk = clk_get_rate(ssp->clk); + + for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) { + clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide); + clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0; + if (clock_rate <= 255) + break; + } + + if (clock_divide > 254) { + dev_err(ssp->dev, + "%s: cannot set clock to %d\n", __func__, rate); + return; + } + + ssp_sck = ssp_clk / clock_divide / (1 + clock_rate); + + val = readl(ssp->base + HW_SSP_TIMING(ssp)); + val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE); + val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE); + val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE); + writel(val, ssp->base + HW_SSP_TIMING(ssp)); + + ssp->clk_rate = ssp_sck; + + dev_dbg(ssp->dev, + "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n", + __func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate); +} +EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate); diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 7b85e03..0813340 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -501,43 +501,6 @@ static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) mxs_mmc_start_cmd(host, mrq->cmd); } -static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate) -{ - struct mxs_ssp *ssp = &host->ssp; - unsigned int ssp_clk, ssp_sck; - u32 clock_divide, clock_rate; - u32 val; - - ssp_clk = clk_get_rate(ssp->clk); - - for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) { - clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide); - clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0; - if (clock_rate <= 255) - break; - } - - if (clock_divide > 254) { - dev_err(mmc_dev(host->mmc), - "%s: cannot set clock to %d\n", __func__, rate); - return; - } - - ssp_sck = ssp_clk / clock_divide / (1 + clock_rate); - - val = readl(ssp->base + HW_SSP_TIMING(ssp)); - val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE); - val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE); - val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE); - writel(val, ssp->base + HW_SSP_TIMING(ssp)); - - ssp->clk_rate = ssp_sck; - - dev_dbg(mmc_dev(host->mmc), - "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n", - __func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate); -} - static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct mxs_mmc_host *host = mmc_priv(mmc); @@ -550,7 +513,7 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->bus_width = 0; if (ios->clock) - mxs_mmc_set_clk_rate(host, ios->clock); + mxs_ssp_set_clk_rate(&host->ssp, ios->clock); } static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h index 475f69f..d07f8dc 100644 --- a/include/linux/spi/mxs-spi.h +++ b/include/linux/spi/mxs-spi.h @@ -136,4 +136,6 @@ struct mxs_ssp { enum mxs_ssp_id devid; }; +void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate); + #endif /* __LINUX_SPI_MXS_SPI_H__ */ -- 1.7.10.4 ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
WARNING: multiple messages have this Message-ID (diff)
From: marex@denx.de (Marek Vasut) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 05/10 V2] mmc: spi: Pull out the SSP clock configuration function Date: Mon, 23 Jul 2012 22:40:47 +0200 [thread overview] Message-ID: <1343076052-27312-6-git-send-email-marex@denx.de> (raw) In-Reply-To: <1343076052-27312-1-git-send-email-marex@denx.de> Pull out the MMC clock configuration function and make it into SSP clock configuration function, so it can be used by the SPI driver too. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Attila Kinali <attila@kinali.ch> Cc: Chris Ball <cjb@laptop.org> CC: Dong Aisheng <b29396@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: Shawn Guo <shawn.guo@linaro.org> --- drivers/clk/mxs/Makefile | 2 +- drivers/clk/mxs/clk-ssp.c | 62 +++++++++++++++++++++++++++++++++++++++++++ drivers/mmc/host/mxs-mmc.c | 39 +-------------------------- include/linux/spi/mxs-spi.h | 2 ++ 4 files changed, 66 insertions(+), 39 deletions(-) create mode 100644 drivers/clk/mxs/clk-ssp.c V2: Add EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate); to allow compiling as a module. (Thanks to Attila Kinali). diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile index 7bedeec..a6a2223 100644 --- a/drivers/clk/mxs/Makefile +++ b/drivers/clk/mxs/Makefile @@ -2,7 +2,7 @@ # Makefile for mxs specific clk # -obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o +obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o clk-ssp.o obj-$(CONFIG_SOC_IMX23) += clk-imx23.o obj-$(CONFIG_SOC_IMX28) += clk-imx28.o diff --git a/drivers/clk/mxs/clk-ssp.c b/drivers/clk/mxs/clk-ssp.c new file mode 100644 index 0000000..af7bdbf --- /dev/null +++ b/drivers/clk/mxs/clk-ssp.c @@ -0,0 +1,62 @@ +/* + * Copyright 2012 DENX Software Engineering, GmbH + * + * Pulled from code: + * Portions copyright (C) 2003 Russell King, PXA MMCI Driver + * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver + * + * Copyright 2008 Embedded Alley Solutions, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/spi/mxs-spi.h> + +void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate) +{ + unsigned int ssp_clk, ssp_sck; + u32 clock_divide, clock_rate; + u32 val; + + ssp_clk = clk_get_rate(ssp->clk); + + for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) { + clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide); + clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0; + if (clock_rate <= 255) + break; + } + + if (clock_divide > 254) { + dev_err(ssp->dev, + "%s: cannot set clock to %d\n", __func__, rate); + return; + } + + ssp_sck = ssp_clk / clock_divide / (1 + clock_rate); + + val = readl(ssp->base + HW_SSP_TIMING(ssp)); + val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE); + val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE); + val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE); + writel(val, ssp->base + HW_SSP_TIMING(ssp)); + + ssp->clk_rate = ssp_sck; + + dev_dbg(ssp->dev, + "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n", + __func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate); +} +EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate); diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 7b85e03..0813340 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -501,43 +501,6 @@ static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) mxs_mmc_start_cmd(host, mrq->cmd); } -static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate) -{ - struct mxs_ssp *ssp = &host->ssp; - unsigned int ssp_clk, ssp_sck; - u32 clock_divide, clock_rate; - u32 val; - - ssp_clk = clk_get_rate(ssp->clk); - - for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) { - clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide); - clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0; - if (clock_rate <= 255) - break; - } - - if (clock_divide > 254) { - dev_err(mmc_dev(host->mmc), - "%s: cannot set clock to %d\n", __func__, rate); - return; - } - - ssp_sck = ssp_clk / clock_divide / (1 + clock_rate); - - val = readl(ssp->base + HW_SSP_TIMING(ssp)); - val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE); - val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE); - val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE); - writel(val, ssp->base + HW_SSP_TIMING(ssp)); - - ssp->clk_rate = ssp_sck; - - dev_dbg(mmc_dev(host->mmc), - "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n", - __func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate); -} - static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct mxs_mmc_host *host = mmc_priv(mmc); @@ -550,7 +513,7 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->bus_width = 0; if (ios->clock) - mxs_mmc_set_clk_rate(host, ios->clock); + mxs_ssp_set_clk_rate(&host->ssp, ios->clock); } static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h index 475f69f..d07f8dc 100644 --- a/include/linux/spi/mxs-spi.h +++ b/include/linux/spi/mxs-spi.h @@ -136,4 +136,6 @@ struct mxs_ssp { enum mxs_ssp_id devid; }; +void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate); + #endif /* __LINUX_SPI_MXS_SPI_H__ */ -- 1.7.10.4
next prev parent reply other threads:[~2012-07-23 20:40 UTC|newest] Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-07-23 20:40 [PATCH 00/10 V2] MXS SPI driver Marek Vasut 2012-07-23 20:40 ` Marek Vasut [not found] ` <1343076052-27312-1-git-send-email-marex-ynQEQJNshbs@public.gmane.org> 2012-07-23 20:40 ` [PATCH 01/10 RESEND] mmc: spi: Move SSP register definitions into separate file Marek Vasut 2012-07-23 20:40 ` Marek Vasut 2012-07-23 20:40 ` [PATCH 02/10 RESEND] mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP Marek Vasut 2012-07-23 20:40 ` Marek Vasut 2012-07-23 20:40 ` [PATCH 03/10 V2] mmc: spi: Add necessary bits into mxs-spi.h Marek Vasut 2012-07-23 20:40 ` Marek Vasut 2012-07-23 20:40 ` [PATCH 04/10 RESEND] mmc: spi: Pull out parts shared between MMC and SPI Marek Vasut 2012-07-23 20:40 ` Marek Vasut 2012-07-23 20:40 ` Marek Vasut [this message] 2012-07-23 20:40 ` [PATCH 05/10 V2] mmc: spi: Pull out the SSP clock configuration function Marek Vasut 2012-07-23 20:40 ` [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28 Marek Vasut 2012-07-23 20:40 ` Marek Vasut [not found] ` <1343076052-27312-7-git-send-email-marex-ynQEQJNshbs@public.gmane.org> 2012-08-01 20:31 ` Mark Brown 2012-08-01 20:31 ` Mark Brown [not found] ` <20120801203106.GW4483-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-08-02 14:58 ` Marek Vasut 2012-08-02 14:58 ` Marek Vasut [not found] ` <201208021658.38237.marex-ynQEQJNshbs@public.gmane.org> 2012-08-02 16:00 ` Mark Brown 2012-08-02 16:00 ` Mark Brown [not found] ` <20120802160016.GA4537-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-08-02 16:03 ` Marek Vasut 2012-08-02 16:03 ` Marek Vasut 2012-08-03 1:29 ` Shawn Guo 2012-08-03 1:29 ` Shawn Guo 2012-08-03 13:38 ` Thomas Petazzoni 2012-08-03 13:38 ` Thomas Petazzoni 2012-08-03 13:46 ` Fabio Estevam 2012-08-03 13:46 ` Fabio Estevam [not found] ` <CAOMZO5AQs1NzJBogcLPcKtY=QSaxpDmzUTvpfScY7P10FEoMJw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-08-03 13:49 ` Marek Vasut 2012-08-03 13:49 ` Marek Vasut 2012-08-03 14:00 ` Marek Vasut 2012-08-03 14:00 ` Marek Vasut 2012-07-23 20:40 ` [PATCH 07/10 RESEND] mmc: spi: Pull out common DMA parts from MXS MMC Marek Vasut 2012-07-23 20:40 ` Marek Vasut 2012-07-23 20:40 ` [PATCH 08/10 RESEND] spi: Add DMA support into SPI driver Marek Vasut 2012-07-23 20:40 ` Marek Vasut [not found] ` <1343076052-27312-9-git-send-email-marex-ynQEQJNshbs@public.gmane.org> 2012-08-01 20:34 ` Mark Brown 2012-08-01 20:34 ` Mark Brown [not found] ` <20120801203448.GX4483-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-08-02 15:00 ` Marek Vasut 2012-08-02 15:00 ` Marek Vasut 2012-07-23 20:40 ` [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation Marek Vasut 2012-07-23 20:40 ` Marek Vasut 2012-07-24 18:15 ` Sergei Shtylyov 2012-07-24 18:15 ` Sergei Shtylyov [not found] ` <500EE64B.8080103-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org> 2012-07-24 19:43 ` Marek Vasut 2012-07-24 19:43 ` Marek Vasut [not found] ` <201207242143.49038.marex-ynQEQJNshbs@public.gmane.org> 2012-07-28 11:40 ` Shawn Guo 2012-07-28 11:40 ` Shawn Guo [not found] ` <20120728113957.GE2128-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org> 2012-07-28 11:42 ` Marek Vasut 2012-07-28 11:42 ` Marek Vasut 2012-07-23 20:40 ` [PATCH 10/10 RESEND] ARM: mx28: Add SPI pinmux into imx28.dtsi Marek Vasut 2012-07-23 20:40 ` Marek Vasut 2012-07-24 9:25 ` [PATCH 00/10 V2] MXS SPI driver Attila Kinali 2012-07-24 9:25 ` Attila Kinali 2012-08-03 14:30 ` [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree Maxime Ripard 2012-08-03 14:30 ` Maxime Ripard [not found] ` <1344004239-22868-1-git-send-email-maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> 2012-08-03 14:43 ` Shawn Guo 2012-08-03 14:43 ` Shawn Guo [not found] ` <20120803144326.GE23791-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org> 2012-08-03 16:27 ` Maxime Ripard 2012-08-03 16:27 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1343076052-27312-6-git-send-email-marex@denx.de \ --to=marex-ynqeqjnshbs@public.gmane.org \ --cc=attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org \ --cc=b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org \ --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \ --cc=cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org \ --cc=fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.