All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Rabeeh Khoury <rabeeh@solid-run.com>,
	Ian Molton <ian.molton@codethink.co.uk>,
	Maen Suleiman <maen@marvell.com>, Olof Johansson <olof@lixom.net>
Subject: [PATCH v2 0/6] ARM: dove: DT support for Marvell Dove
Date: Sat, 11 Aug 2012 12:35:20 +0200	[thread overview]
Message-ID: <1344681326-17946-1-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
In-Reply-To: <1344255815-4457-1-git-send-email-sebastian.hesselbarth@gmail.com>

This patch set adds DT support for Marvell Dove SoC and three boards
equipped with this SoC. The work is based on device tree support for
Marvell Orion based SoCs introduced in 3.6-rc1.

The first three patches move mach-dove closer to Marvell Kirkwood's
setup code by unifying the clock setup routines, adding clock gating
control, and support for Marvell's crypto engine to mach-dove.

Patches 4 and 5 add a generic DT machine descriptor to mach-dove and
corresponding DT descriptors for the SoC and already supported boards.

Finally, the last patch adds a DT descriptor for the SolidRun CuBox,
a plug computer based on Marvell Dove.

This patch set relies on a DT support patch for sdhci-dove that has
been sent to the corresponding maintainers a few days ago.

Sebastian Hesselbarth (6):
  ARM: dove: unify clock setup
  ARM: dove: add clock gating control
  ARM: dove: add crypto engine
  ARM: dove: add device tree based machine descriptor
  ARM: dove: add device tree descriptors
  ARM: dove: SolidRun CuBox DT

 arch/arm/boot/dts/dove-cm-a510.dts   |   38 +++++++++
 arch/arm/boot/dts/dove-cubox.dts     |   42 +++++++++
 arch/arm/boot/dts/dove-dove-db.dts   |   38 +++++++++
 arch/arm/boot/dts/dove.dtsi          |  143 +++++++++++++++++++++++++++++++
 arch/arm/mach-dove/Kconfig           |    7 ++
 arch/arm/mach-dove/Makefile.boot     |    4 +
 arch/arm/mach-dove/common.c          |  156 +++++++++++++++++++++++++++++++---
 arch/arm/mach-dove/include/mach/pm.h |   54 ++++++++----
 8 files changed, 452 insertions(+), 30 deletions(-)
 create mode 100644 arch/arm/boot/dts/dove-cm-a510.dts
 create mode 100644 arch/arm/boot/dts/dove-cubox.dts
 create mode 100644 arch/arm/boot/dts/dove-dove-db.dts
 create mode 100644 arch/arm/boot/dts/dove.dtsi

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Ian Molton <ian.molton@codethink.co.uk>
Cc: Maen Suleiman <maen@marvell.com>
Cc: Olof Johansson <olof@lixom.net>

v2: Removed clk_prepare_enable for tclk and updated subsequent patches
-- 
1.7.10.4


WARNING: multiple messages have this Message-ID (diff)
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/6] ARM: dove: DT support for Marvell Dove
Date: Sat, 11 Aug 2012 12:35:20 +0200	[thread overview]
Message-ID: <1344681326-17946-1-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
In-Reply-To: <1344255815-4457-1-git-send-email-sebastian.hesselbarth@gmail.com>

This patch set adds DT support for Marvell Dove SoC and three boards
equipped with this SoC. The work is based on device tree support for
Marvell Orion based SoCs introduced in 3.6-rc1.

The first three patches move mach-dove closer to Marvell Kirkwood's
setup code by unifying the clock setup routines, adding clock gating
control, and support for Marvell's crypto engine to mach-dove.

Patches 4 and 5 add a generic DT machine descriptor to mach-dove and
corresponding DT descriptors for the SoC and already supported boards.

Finally, the last patch adds a DT descriptor for the SolidRun CuBox,
a plug computer based on Marvell Dove.

This patch set relies on a DT support patch for sdhci-dove that has
been sent to the corresponding maintainers a few days ago.

Sebastian Hesselbarth (6):
  ARM: dove: unify clock setup
  ARM: dove: add clock gating control
  ARM: dove: add crypto engine
  ARM: dove: add device tree based machine descriptor
  ARM: dove: add device tree descriptors
  ARM: dove: SolidRun CuBox DT

 arch/arm/boot/dts/dove-cm-a510.dts   |   38 +++++++++
 arch/arm/boot/dts/dove-cubox.dts     |   42 +++++++++
 arch/arm/boot/dts/dove-dove-db.dts   |   38 +++++++++
 arch/arm/boot/dts/dove.dtsi          |  143 +++++++++++++++++++++++++++++++
 arch/arm/mach-dove/Kconfig           |    7 ++
 arch/arm/mach-dove/Makefile.boot     |    4 +
 arch/arm/mach-dove/common.c          |  156 +++++++++++++++++++++++++++++++---
 arch/arm/mach-dove/include/mach/pm.h |   54 ++++++++----
 8 files changed, 452 insertions(+), 30 deletions(-)
 create mode 100644 arch/arm/boot/dts/dove-cm-a510.dts
 create mode 100644 arch/arm/boot/dts/dove-cubox.dts
 create mode 100644 arch/arm/boot/dts/dove-dove-db.dts
 create mode 100644 arch/arm/boot/dts/dove.dtsi

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Ian Molton <ian.molton@codethink.co.uk>
Cc: Maen Suleiman <maen@marvell.com>
Cc: Olof Johansson <olof@lixom.net>

v2: Removed clk_prepare_enable for tclk and updated subsequent patches
-- 
1.7.10.4

  parent reply	other threads:[~2012-08-11 10:36 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-06 12:23 [PATCH 0/6] ARM: dove: DT support for Marvell Dove Sebastian Hesselbarth
2012-08-06 12:23 ` Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 1/6] ARM: dove: unify clock setup Sebastian Hesselbarth
2012-08-06 12:23   ` Sebastian Hesselbarth
2012-08-11  9:12   ` Andrew Lunn
2012-08-11  9:12     ` Andrew Lunn
2012-08-11  9:38     ` Sebastian Hesselbarth
2012-08-11  9:38       ` Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 2/6] ARM: dove: add clock gating control Sebastian Hesselbarth
2012-08-06 12:23   ` Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 3/6] ARM: dove: add crypto engine Sebastian Hesselbarth
2012-08-06 12:23   ` Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 4/6] ARM: dove: add device tree based machine descriptor Sebastian Hesselbarth
2012-08-06 12:23   ` Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 5/6] ARM: dove: add device tree descriptors Sebastian Hesselbarth
2012-08-06 12:23   ` Sebastian Hesselbarth
2012-08-06 12:23 ` [PATCH 6/6] ARM: dove: SolidRun CuBox DT Sebastian Hesselbarth
2012-08-06 12:23   ` Sebastian Hesselbarth
2012-08-06 14:02 ` [PATCH 0/6] ARM: dove: DT support for Marvell Dove Arnd Bergmann
2012-08-06 14:02   ` Arnd Bergmann
2012-08-06 14:16   ` Sebastian Hesselbarth
2012-08-06 14:16     ` Sebastian Hesselbarth
2012-08-06 14:23     ` Arnd Bergmann
2012-08-06 14:23       ` Arnd Bergmann
2012-08-07 16:53     ` Russell King - ARM Linux
2012-08-07 16:53       ` Russell King - ARM Linux
2012-08-07 19:32       ` Sebastian Hesselbarth
2012-08-07 19:32         ` Sebastian Hesselbarth
2012-08-11 10:35 ` Sebastian Hesselbarth [this message]
2012-08-11 10:35   ` [PATCH v2 " Sebastian Hesselbarth
2012-08-11 10:35   ` [PATCH v2 1/6] ARM: dove: unify clock setup Sebastian Hesselbarth
2012-08-11 10:35     ` Sebastian Hesselbarth
2012-08-11 10:35   ` [PATCH v2 2/6] ARM: dove: add clock gating control Sebastian Hesselbarth
2012-08-11 10:35     ` Sebastian Hesselbarth
2012-08-12 15:22     ` Andrew Lunn
2012-08-12 15:22       ` Andrew Lunn
2012-08-11 10:35   ` [PATCH v2 3/6] ARM: dove: add crypto engine Sebastian Hesselbarth
2012-08-11 10:35     ` Sebastian Hesselbarth
2012-08-11 10:35   ` [PATCH v2 4/6] ARM: dove: add device tree based machine descriptor Sebastian Hesselbarth
2012-08-11 10:35     ` Sebastian Hesselbarth
2012-08-11 10:35   ` [PATCH v2 5/6] ARM: dove: add device tree descriptors Sebastian Hesselbarth
2012-08-11 10:35     ` Sebastian Hesselbarth
2012-08-11 10:35   ` [PATCH v2 6/6] ARM: dove: SolidRun CuBox DT Sebastian Hesselbarth
2012-08-11 10:35     ` Sebastian Hesselbarth
2012-08-15 17:07   ` [PATCH v3 0/6] ARM: dove: DT support for Marvell Dove Sebastian Hesselbarth
2012-08-15 17:07     ` Sebastian Hesselbarth
2012-08-15 17:07     ` [PATCH v3 1/6] ARM: dove: unify clock setup Sebastian Hesselbarth
2012-08-15 17:07       ` Sebastian Hesselbarth
2012-08-15 17:07     ` [PATCH v3 2/6] ARM: dove: add clock gating control Sebastian Hesselbarth
2012-08-15 17:07       ` Sebastian Hesselbarth
2012-08-15 17:07     ` [PATCH v3 3/6] ARM: dove: add crypto engine Sebastian Hesselbarth
2012-08-15 17:07       ` Sebastian Hesselbarth
2012-08-15 17:07     ` [PATCH v3 4/6] ARM: dove: add device tree based machine descriptor Sebastian Hesselbarth
2012-08-15 17:07       ` Sebastian Hesselbarth
2012-08-15 17:07     ` [PATCH v3 5/6] ARM: dove: add device tree descriptors Sebastian Hesselbarth
2012-08-15 17:07       ` Sebastian Hesselbarth
2012-08-15 17:07     ` [PATCH v3 6/6] ARM: dove: SolidRun CuBox DT Sebastian Hesselbarth
2012-08-15 17:07       ` Sebastian Hesselbarth
2012-09-10  2:41     ` [PATCH v3 0/6] ARM: dove: DT support for Marvell Dove Jason Cooper
2012-09-10  2:41       ` Jason Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1344681326-17946-1-git-send-email-sebastian.hesselbarth@gmail.com \
    --to=sebastian.hesselbarth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=ian.molton@codethink.co.uk \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=maen@marvell.com \
    --cc=olof@lixom.net \
    --cc=rabeeh@solid-run.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.