From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 16/18] drm/i915: set/unset the DDI eDP backlight
Date: Tue, 23 Oct 2012 18:30:06 -0200 [thread overview]
Message-ID: <1351024208-3489-17-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1351024208-3489-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 15 +++++++++++++--
drivers/gpu/drm/i915/intel_dp.c | 4 ++--
drivers/gpu/drm/i915/intel_drv.h | 6 ++++--
3 files changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 30b0db7..232f2d0 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1231,12 +1231,23 @@ void intel_enable_ddi(struct intel_encoder *intel_encoder)
* enabling the port.
*/
I915_WRITE(DDI_BUF_CTL(port), DDI_BUF_CTL_ENABLE);
+ } else if (type == INTEL_OUTPUT_EDP) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ ironlake_edp_backlight_on(intel_dp);
}
}
-void intel_disable_ddi(struct intel_encoder *encoder)
+void intel_disable_ddi(struct intel_encoder *intel_encoder)
{
- /* This will be needed in the future, so leave it here for now */
+ struct drm_encoder *encoder = &intel_encoder->base;
+ int type = intel_encoder->type;
+
+ if (type == INTEL_OUTPUT_EDP) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ ironlake_edp_backlight_off(intel_dp);
+ }
}
int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 6d30b2d..d926f99 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1166,7 +1166,7 @@ static void ironlake_edp_panel_off(struct intel_dp *intel_dp)
ironlake_wait_panel_off(intel_dp);
}
-static void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
+void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -1192,7 +1192,7 @@ static void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
intel_panel_enable_backlight(dev, pipe);
}
-static void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
+void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index c05e892..47d62fb 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -439,6 +439,8 @@ extern void intel_dp_start_link_train(struct intel_dp *intel_dp);
extern void intel_dp_complete_link_train(struct intel_dp *intel_dp);
extern void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
extern bool intel_dpd_is_edp(struct drm_device *dev);
+extern void ironlake_edp_backlight_on(struct intel_dp *intel_dp);
+extern void ironlake_edp_backlight_off(struct intel_dp *intel_dp);
extern void intel_edp_link_config(struct intel_encoder *, int *, int *);
extern int intel_edp_target_clock(struct intel_encoder *,
struct drm_display_mode *mode);
@@ -602,8 +604,8 @@ extern void intel_disable_gt_powersave(struct drm_device *dev);
extern void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv);
extern void ironlake_teardown_rc6(struct drm_device *dev);
-extern void intel_enable_ddi(struct intel_encoder *encoder);
-extern void intel_disable_ddi(struct intel_encoder *encoder);
+extern void intel_enable_ddi(struct intel_encoder *intel_encoder);
+extern void intel_disable_ddi(struct intel_encoder *intel_encoder);
extern bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe);
extern void intel_ddi_mode_set(struct drm_encoder *encoder,
--
1.7.11.4
next prev parent reply other threads:[~2012-10-23 20:30 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-23 20:29 [PATCH 00/18] Haswell eDP enablement v3 Paulo Zanoni
2012-10-23 20:29 ` [PATCH 01/18] drm/i915: fork a Haswell version of ironlake_crtc_{enable, disable} Paulo Zanoni
2012-10-24 13:15 ` Rodrigo Vivi
2012-10-25 11:03 ` Jani Nikula
2012-10-23 20:29 ` [PATCH 02/18] drm/i915: fix the checks inside Ironlake/Haswell crtc enable/disable Paulo Zanoni
2012-10-24 13:18 ` Rodrigo Vivi
2012-10-24 13:31 ` Paulo Zanoni
2012-10-23 20:29 ` [PATCH 03/18] drm/i915: simplify intel_crtc_driving_pch Paulo Zanoni
2012-10-25 11:13 ` Jani Nikula
2012-10-25 12:04 ` Paulo Zanoni
2012-10-25 12:37 ` Paulo Zanoni
2012-10-23 20:29 ` [PATCH 04/18] drm/i915: don't call Haswell PCH code when we can't or don't need Paulo Zanoni
2012-10-25 12:18 ` Jani Nikula
2012-10-23 20:29 ` [PATCH 05/18] drm/i915: add TRANSCODER_EDP Paulo Zanoni
2012-10-24 14:50 ` Lespiau, Damien
2012-10-24 16:33 ` Paulo Zanoni
2012-10-24 16:43 ` Daniel Vetter
2012-10-24 17:59 ` Paulo Zanoni
2012-10-25 10:23 ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 06/18] drm/i915: convert PIPE_CLK_SEL to transcoder Paulo Zanoni
2012-10-24 14:55 ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 07/18] drm/i915: convert DDI_FUNC_CTL " Paulo Zanoni
2012-10-24 15:12 ` Lespiau, Damien
2012-10-24 15:30 ` Lespiau, Damien
2012-10-24 16:44 ` Paulo Zanoni
2012-10-24 18:06 ` Paulo Zanoni
2012-10-25 10:24 ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 08/18] drm/i915: check TRANSCODER_EDP on intel_modeset_setup_hw_state Paulo Zanoni
2012-10-24 12:38 ` Daniel Vetter
2012-10-24 15:45 ` Lespiau, Damien
2012-10-24 15:50 ` Daniel Vetter
2012-10-24 18:09 ` Paulo Zanoni
2012-10-25 10:26 ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 09/18] drm/i915: convert PIPECONF to use transcoder instead of pipe Paulo Zanoni
2012-10-25 11:12 ` Lespiau, Damien
2012-10-23 20:30 ` [PATCH 10/18] drm/i915: convert PIPE_MSA_MISC to transcoder Paulo Zanoni
2012-10-25 11:09 ` Lespiau, Damien
2012-10-23 20:30 ` [PATCH 11/18] drm/i915: convert CPU M/N timings " Paulo Zanoni
2012-10-25 11:10 ` Lespiau, Damien
2012-10-23 20:30 ` [PATCH 12/18] drm/i915: convert pipe timing definitions " Paulo Zanoni
2012-10-25 11:12 ` Lespiau, Damien
2012-10-23 20:30 ` [PATCH 13/18] drm/i915: implement workaround for VTOTAL when using TRANSCODER_EDP Paulo Zanoni
2012-10-23 20:44 ` Daniel Vetter
2012-10-24 13:34 ` Paulo Zanoni
2012-10-24 15:24 ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 14/18] drm/i915: select the correct pipe " Paulo Zanoni
2012-10-24 13:58 ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 15/18] drm/i915: set the correct eDP aux channel clock divider on DDI Paulo Zanoni
2012-10-24 14:07 ` Rodrigo Vivi
2012-10-23 20:30 ` Paulo Zanoni [this message]
2012-10-24 14:11 ` [PATCH 16/18] drm/i915: set/unset the DDI eDP backlight Rodrigo Vivi
2012-10-24 14:22 ` Daniel Vetter
2012-10-24 14:43 ` Paulo Zanoni
2012-10-23 20:30 ` [PATCH 17/18] drm/i915: turn the eDP DDI panel on/off Paulo Zanoni
2012-10-24 15:20 ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 18/18] drm/i915: enable DDI eDP Paulo Zanoni
2012-10-24 14:24 ` Rodrigo Vivi
2012-10-25 20:17 ` Daniel Vetter
2012-10-24 13:31 ` [PATCH 02-1/18] drm/i915: fix checks inside ironlake_crtc_{enable, disable} Paulo Zanoni
2012-10-24 13:32 ` [PATCH 02-2/18] drm/i915: fix checks inside haswell_crtc_{enable, disable} Paulo Zanoni
2012-10-25 11:07 ` Jani Nikula
2012-10-25 11:04 ` [PATCH 02-1/18] drm/i915: fix checks inside ironlake_crtc_{enable, disable} Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351024208-3489-17-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.