From: Peter Hurley <peter@hurleysoftware.com>
To: Shawn Starr <shawn.starr@rogers.com>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)
Date: Fri, 08 Mar 2013 16:33:02 -0500 [thread overview]
Message-ID: <1362778382.20990.17.camel@thor.lan> (raw)
In-Reply-To: <2663178.G2EStYDi2n@segfault.sh0n.net>
[ +linux-usb ]
On Fri, 2013-03-08 at 14:12 -0500, Shawn Starr wrote:
> Hello folks,
>
> I am noticing since rc0 and now rc1, very poor interrupt handling. Keyboard response, mouse movements, display refreshing etc. General input/display sluggishness. Did something break IRQ handling somewhere? I need to validate if this happens with X not running also if it is i915 related somehow. The behavor is noticed in a console login however.
>
> Device: Lenovo W500 laptop
Hi Shawn,
Unhandled interrupts is the problem.
Is the device below being id'd properly?
If you remove this device, does the problem go away?
> Bus 006 Device 004: ID 0557:2004 ATEN International Co., Ltd UC-100KM PS/2 Mouse and Keyboard adapter
> [ 2.947806] usb 6-2: New USB device found, idVendor=0557, idProduct=2004
> [ 2.947825] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 2.947832] usb 6-2: Product: UC100KM V2.10
> [ 2.947837] usb 6-2: Manufacturer: ATEN
> [ 2.968796] input: ATEN UC100KM V2.10 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input7
> [ 2.969451] hid-generic 0003:0557:2004.0002: input,hidraw1: USB HID v1.00 Keyboard [ATEN UC100KM V2.10] on usb-0000:00:1d.0-2/input0
> [ 2.991716] input: ATEN UC100KM V2.10 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input8
> [ 2.992227] hid-generic 0003:0557:2004.0003: input,hidraw2: USB HID v1.00 Mouse [ATEN UC100KM V2.10] on usb-0000:00:1d.0-2/input1
> [ 3.538457] irq 16: nobody cared (try booting with the "irqpoll" option)
> [ 3.538463] Pid: 0, comm: swapper/1 Not tainted 3.9.0-0.rc1.git0.5.fc19.x86_64 #1
> [ 3.538464] Call Trace:
> [ 3.538466] <IRQ> [<ffffffff810ee1f2>] __report_bad_irq+0x32/0xd0
> [ 3.538475] [<ffffffff810ee608>] note_interrupt+0x138/0x1f0
> [ 3.538479] [<ffffffff814f0461>] ? cpuidle_wrap_enter+0x41/0x80
> [ 3.538482] [<ffffffff814efae0>] ? intel_pstate_timer_func+0x350/0x350
> [ 3.538485] [<ffffffff810ebfc1>] handle_irq_event_percpu+0xe1/0x1e0
> [ 3.538488] [<ffffffff814efae0>] ? intel_pstate_timer_func+0x350/0x350
> [ 3.538490] [<ffffffff810ec0f6>] handle_irq_event+0x36/0x60
> [ 3.538493] [<ffffffff810ef145>] handle_fasteoi_irq+0x55/0xf0
> [ 3.538496] [<ffffffff810151ef>] handle_irq+0xbf/0x150
> [ 3.538500] [<ffffffff81649e5a>] ? atomic_notifier_call_chain+0x1a/0x20
> [ 3.538503] [<ffffffff8164ff0d>] do_IRQ+0x4d/0xc0
> [ 3.538505] [<ffffffff816461ad>] common_interrupt+0x6d/0x6d
> [ 3.538506] <EOI> [<ffffffff814f0461>] ? cpuidle_wrap_enter+0x41/0x80
> [ 3.538511] [<ffffffff814f04b0>] cpuidle_enter_tk+0x10/0x20
> [ 3.538513] [<ffffffff814f0212>] cpuidle_idle_call+0xb2/0x1e0
> [ 3.538516] [<ffffffff8101c025>] cpu_idle+0xe5/0x140
> [ 3.538520] [<ffffffff81634226>] start_secondary+0x249/0x24b
> [ 3.538522] handlers:
> [ 3.538525] [<ffffffff81458bf0>] usb_hcd_irq
> [ 3.538530] [<ffffffffa0173a00>] yenta_interrupt [yenta_socket]
> [ 3.538531] Disabling IRQ #16
> [ 5.281769] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64>
> -- device info --
>
> PCI Bus:
>
> 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
> 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
> 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
> 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
> 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
> 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
> 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
> 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
> 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
> 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
> 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
> 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
> 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
> 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
> 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
> 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
> 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
> 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
> 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
> 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
> 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
>
> USB Bus:
>
> Bus 001 Device 003: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000
> Bus 006 Device 005: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
> Bus 006 Device 004: ID 0557:2004 ATEN International Co., Ltd UC-100KM PS/2 Mouse and Keyboard adapter
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
>
> IRQ listing:
>
> CPU0 CPU1
> 0: 69725 70165 IO-APIC-edge timer
> 1: 394 399 IO-APIC-edge i8042
> 8: 1 0 IO-APIC-edge rtc0
> 9: 832 838 IO-APIC-fasteoi acpi
> 12: 12274 12373 IO-APIC-edge i8042
> 16: 50489 49512 IO-APIC-fasteoi uhci_hcd:usb6, yenta
> 17: 0 0 IO-APIC-fasteoi uhci_hcd:usb7
> 18: 27 25 IO-APIC-fasteoi uhci_hcd:usb8, mmc0, r592
> 19: 4 3 IO-APIC-fasteoi ehci_hcd:usb2
> 20: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
> 21: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
> 22: 0 0 IO-APIC-fasteoi uhci_hcd:usb5
> 23: 8252 7917 IO-APIC-fasteoi ehci_hcd:usb1, i801_smbus
> 40: 0 0 PCI-MSI-edge PCIe PME, pciehp
> 41: 0 0 PCI-MSI-edge PCIe PME, pciehp
> 42: 0 0 PCI-MSI-edge PCIe PME, pciehp
> 43: 15869 15940 PCI-MSI-edge ahci
> 44: 78508 78030 PCI-MSI-edge i915
> 45: 10 3243 PCI-MSI-edge eth0
> 46: 0 1 PCI-MSI-edge iwlwifi
> 47: 151 145 PCI-MSI-edge snd_hda_intel
> NMI: 53 60 Non-maskable interrupts
> LOC: 90697 218602 Local timer interrupts
> SPU: 0 0 Spurious interrupts
> PMI: 53 60 Performance monitoring interrupts
> IWI: 0 1 IRQ work interrupts
> RTR: 0 0 APIC ICR read retries
> RES: 30534 11218 Rescheduling interrupts
> CAL: 40751 15944 Function call interrupts
> TLB: 279 402 TLB shootdowns
> TRM: 0 0 Thermal event interrupts
> THR: 0 0 Threshold APIC interrupts
> MCE: 0 0 Machine check exceptions
> MCP: 5 5 Machine check polls
> ERR: 0
> MIS: 0
>
>
> full kernel boot:
>
> [spstarr@segfault ~]$ dmesg -f kern
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.9.0-0.rc1.git0.5.fc19.x86_64 (mockbuild@buildvm-22.phx2.fedoraproject.org) (gcc version 4.8.0 20130304 (Red Hat 4.8.0-0.15) (GCC) ) #1 SMP Thu Mar 7 04:22:17 UTC 2013
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.9.0-0.rc1.git0.5.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.luks=0 rd.lvm.lv=fedora/root rhgb quiet elevator=deadline slub_debug=- LANG=en_US.UTF-8
> [ 0.000000] Disabled fast string operations
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd4a0fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000bd4a1000-0x00000000bd4a6fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000bd4a7000-0x00000000bd5b6fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000bd5b7000-0x00000000bd60efff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000bd60f000-0x00000000bd6c5fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000bd6c6000-0x00000000bd6d0fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bd6d1000-0x00000000bd6d3fff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000bd6d4000-0x00000000bd6d7fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000bd6d8000-0x00000000bd6dbfff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bd6dc000-0x00000000bd6defff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000bd6df000-0x00000000bd705fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bd706000-0x00000000bd707fff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000bd708000-0x00000000bd90efff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000bd90f000-0x00000000bd99efff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bd99f000-0x00000000bd9fefff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000bd9ff000-0x00000000bd9fffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000bdc00000-0x00000000bfffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023bffffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.4 present.
> [ 0.000000] DMI: LENOVO 4058CTO/4058CTO, BIOS 6FET93WW (3.23 ) 10/12/2012
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 23C000000 mask FFC000000 uncachable
> [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable
> [ 0.000000] 2 base 000000000 mask F80000000 write-back
> [ 0.000000] 3 base 080000000 mask FC0000000 write-back
> [ 0.000000] 4 base 100000000 mask F00000000 write-back
> [ 0.000000] 5 base 200000000 mask FC0000000 write-back
> [ 0.000000] 6 base 0BDE00000 mask FFFE00000 uncachable
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] original variable MTRRs
> [ 0.000000] reg 0, base: 9152MB, range: 64MB, type UC
> [ 0.000000] reg 1, base: 3040MB, range: 32MB, type UC
> [ 0.000000] reg 2, base: 0GB, range: 2GB, type WB
> [ 0.000000] reg 3, base: 2GB, range: 1GB, type WB
> [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
> [ 0.000000] reg 5, base: 8GB, range: 1GB, type WB
> [ 0.000000] reg 6, base: 3038MB, range: 2MB, type UC
> [ 0.000000] total RAM covered: 8094M
> [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 192M
> [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 7 lose cover RAM: 0G
> [ 0.000000] *BAD*gran_size: 64K chunk_size: 2G num_reg: 7 lose cover RAM: -1G
> [ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 7 lose cover RAM: 192M
> [ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 128K chunk_size: 512M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 7 lose cover RAM: 0G
> [ 0.000000] *BAD*gran_size: 128K chunk_size: 2G num_reg: 7 lose cover RAM: -1G
> [ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 7 lose cover RAM: 192M
> [ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 256K chunk_size: 512M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 7 lose cover RAM: 0G
> [ 0.000000] *BAD*gran_size: 256K chunk_size: 2G num_reg: 7 lose cover RAM: -1G
> [ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 7 lose cover RAM: 192M
> [ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 512K chunk_size: 512M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 7 lose cover RAM: 0G
> [ 0.000000] *BAD*gran_size: 512K chunk_size: 2G num_reg: 7 lose cover RAM: -1G
> [ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 7 lose cover RAM: 192M
> [ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 1M chunk_size: 512M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 7 lose cover RAM: 0G
> [ 0.000000] *BAD*gran_size: 1M chunk_size: 2G num_reg: 7 lose cover RAM: -1G
> [ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 7 lose cover RAM: 5056M
> [ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 7 lose cover RAM: 192M
> [ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 2M chunk_size: 512M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 7 lose cover RAM: 0G
> [ 0.000000] *BAD*gran_size: 2M chunk_size: 2G num_reg: 7 lose cover RAM: -1G
> [ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 7 lose cover RAM: 5058M
> [ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 7 lose cover RAM: 5058M
> [ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 7 lose cover RAM: 5058M
> [ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 7 lose cover RAM: 194M
> [ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 7 lose cover RAM: 2M
> [ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 7 lose cover RAM: 2M
> [ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 7 lose cover RAM: 2M
> [ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 7 lose cover RAM: 2M
> [ 0.000000] *BAD*gran_size: 4M chunk_size: 2G num_reg: 7 lose cover RAM: -1022M
> [ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 7 lose cover RAM: 5062M
> [ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 7 lose cover RAM: 198M
> [ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 7 lose cover RAM: 6M
> [ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 7 lose cover RAM: 6M
> [ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 7 lose cover RAM: 6M
> [ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 7 lose cover RAM: 6M
> [ 0.000000] *BAD*gran_size: 8M chunk_size: 2G num_reg: 7 lose cover RAM: -1018M
> [ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 974M
> [ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 7 lose cover RAM: 5070M
> [ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 7 lose cover RAM: 206M
> [ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 7 lose cover RAM: 14M
> [ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 7 lose cover RAM: 14M
> [ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 7 lose cover RAM: 14M
> [ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 7 lose cover RAM: 14M
> [ 0.000000] *BAD*gran_size: 16M chunk_size: 2G num_reg: 7 lose cover RAM: -1010M
> [ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 7 lose cover RAM: 478M
> [ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: 478M
> [ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 6 lose cover RAM: 30M
> [ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 6 lose cover RAM: 30M
> [ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 6 lose cover RAM: 30M
> [ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 6 lose cover RAM: 30M
> [ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 7 lose cover RAM: 30M
> [ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 478M
> [ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 6 lose cover RAM: 30M
> [ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 6 lose cover RAM: 30M
> [ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 6 lose cover RAM: 30M
> [ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 6 lose cover RAM: 30M
> [ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 7 lose cover RAM: 30M
> [ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 7 lose cover RAM: 286M
> [ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 6 lose cover RAM: 158M
> [ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 6 lose cover RAM: 158M
> [ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 6 lose cover RAM: 158M
> [ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 7 lose cover RAM: 158M
> [ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 6 lose cover RAM: 414M
> [ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 6 lose cover RAM: 414M
> [ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 6 lose cover RAM: 414M
> [ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 7 lose cover RAM: 414M
> [ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 4 lose cover RAM: 926M
> [ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 6 lose cover RAM: 926M
> [ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 7 lose cover RAM: 926M
> [ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 2 lose cover RAM: 1950M
> [ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 2 lose cover RAM: 1950M
> [ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 2 lose cover RAM: 1950M
> [ 0.000000] mtrr_cleanup: can not find optimal value
> [ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size
> [ 0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
> [ 0.000000] e820: last_pfn = 0xbda00 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000f6480-0x000f648f] mapped at [ffff8800000f6480]
> [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01fc8000, 0x01fc8fff] PGTABLE
> [ 0.000000] BRK [0x01fc9000, 0x01fc9fff] PGTABLE
> [ 0.000000] BRK [0x01fca000, 0x01fcafff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
> [ 0.000000] [mem 0x23be00000-0x23bffffff] page 2M
> [ 0.000000] BRK [0x01fcb000, 0x01fcbfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
> [ 0.000000] [mem 0x238000000-0x23bdfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
> [ 0.000000] [mem 0x200000000-0x237ffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbd4a0fff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0xbd3fffff] page 2M
> [ 0.000000] [mem 0xbd400000-0xbd4a0fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xbd4a7000-0xbd5b6fff]
> [ 0.000000] [mem 0xbd4a7000-0xbd5b6fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xbd60f000-0xbd6c5fff]
> [ 0.000000] [mem 0xbd60f000-0xbd6c5fff] page 4k
> [ 0.000000] BRK [0x01fcc000, 0x01fccfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0xbd9ff000-0xbd9fffff]
> [ 0.000000] [mem 0xbd9ff000-0xbd9fffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
> [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
> [ 0.000000] RAMDISK: [mem 0x343b4000-0x361d1fff]
> [ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO)
> [ 0.000000] ACPI: XSDT 00000000bd949b3a 0009C (v01 LENOVO TP-6F 00003230 LTP 00000000)
> [ 0.000000] ACPI: FACP 00000000bd949c00 000F4 (v03 LENOVO TP-6F 00003230 LNVO 00000001)
> [ 0.000000] ACPI: DSDT 00000000bd94a00e 0FB01 (v01 LENOVO TP-6F 00003230 MSFT 03000000)
> [ 0.000000] ACPI: FACS 00000000bd98e000 00040
> [ 0.000000] ACPI: SSDT 00000000bd949db4 0025A (v01 LENOVO TP-6F 00003230 MSFT 03000000)
> [ 0.000000] ACPI: ECDT 00000000bd959b0f 00052 (v01 LENOVO TP-6F 00003230 LNVO 00000001)
> [ 0.000000] ACPI: APIC 00000000bd959b61 00078 (v01 LENOVO TP-6F 00003230 LNVO 00000001)
> [ 0.000000] ACPI: MCFG 00000000bd959bd9 0003C (v01 LENOVO TP-6F 00003230 LNVO 00000001)
> [ 0.000000] ACPI: HPET 00000000bd959c15 00038 (v01 LENOVO TP-6F 00003230 LNVO 00000001)
> [ 0.000000] ACPI: SLIC 00000000bd959dc2 00176 (v01 LENOVO TP-6F 00003230 LTP 00000000)
> [ 0.000000] ACPI: BOOT 00000000bd959f38 00028 (v01 LENOVO TP-6F 00003230 LTP 00000001)
> [ 0.000000] ACPI: ASF! 00000000bd959f60 000A0 (v16 LENOVO TP-6F 00003230 PTL 00000001)
> [ 0.000000] ACPI: SSDT 00000000bd98d1fa 00568 (v01 LENOVO TP-6F 00003230 INTL 20050513)
> [ 0.000000] ACPI: TCPA 00000000bd707000 00032 (v00 00000000 00000000)
> [ 0.000000] ACPI: DMAR 00000000bd706000 00120 (v01 ? 00000001 00000000)
> [ 0.000000] ACPI: SSDT 00000000bd6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000bd6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000bd6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23bffffff]
> [ 0.000000] NODE_DATA [mem 0x23bfe4000-0x23bff7fff]
> [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x23bffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
> [ 0.000000] node 0: [mem 0x00100000-0xbd4a0fff]
> [ 0.000000] node 0: [mem 0xbd4a7000-0xbd5b6fff]
> [ 0.000000] node 0: [mem 0xbd60f000-0xbd6c5fff]
> [ 0.000000] node 0: [mem 0xbd9ff000-0xbd9fffff]
> [ 0.000000] node 0: [mem 0x100000000-0x23bffffff]
> [ 0.000000] On node 0 totalpages: 2070022
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 12058 pages used for memmap
> [ 0.000000] DMA32 zone: 771689 pages, LIFO batch:31
> [ 0.000000] Normal zone: 20224 pages used for memmap
> [ 0.000000] Normal zone: 1294336 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
> [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000bd4a1000 - 00000000bd4a7000
> [ 0.000000] PM: Registered nosave memory: 00000000bd5b7000 - 00000000bd60f000
> [ 0.000000] PM: Registered nosave memory: 00000000bd6c6000 - 00000000bd6d1000
> [ 0.000000] PM: Registered nosave memory: 00000000bd6d1000 - 00000000bd6d4000
> [ 0.000000] PM: Registered nosave memory: 00000000bd6d4000 - 00000000bd6d8000
> [ 0.000000] PM: Registered nosave memory: 00000000bd6d8000 - 00000000bd6dc000
> [ 0.000000] PM: Registered nosave memory: 00000000bd6dc000 - 00000000bd6df000
> [ 0.000000] PM: Registered nosave memory: 00000000bd6df000 - 00000000bd706000
> [ 0.000000] PM: Registered nosave memory: 00000000bd706000 - 00000000bd708000
> [ 0.000000] PM: Registered nosave memory: 00000000bd708000 - 00000000bd90f000
> [ 0.000000] PM: Registered nosave memory: 00000000bd90f000 - 00000000bd99f000
> [ 0.000000] PM: Registered nosave memory: 00000000bd99f000 - 00000000bd9ff000
> [ 0.000000] PM: Registered nosave memory: 00000000bda00000 - 00000000bdc00000
> [ 0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000
> [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
> [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
> [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
> [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
> [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
> [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
> [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
> [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
> [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
> [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
> [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
> [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
> [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023bc00000 s85120 r8192 d21376 u524288
> [ 0.000000] pcpu-alloc: s85120 r8192 d21376 u524288 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037655
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.9.0-0.rc1.git0.5.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.luks=0 rd.lvm.lv=fedora/root rhgb quiet elevator=deadline slub_debug=- LANG=en_US.UTF-8
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] __ex_table already sorted, skipping sort
> [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Memory: 8035144k/9371648k available (6472k kernel code, 1091560k absent, 244944k reserved, 6771k data, 1356k init)
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
> [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 33554432 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration failed
> [ 0.000000] tsc: Unable to calibrate against PIT
> [ 0.000000] tsc: using HPET reference calibration
> [ 0.000000] tsc: Detected 2526.945 MHz processor
> [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.89 BogoMIPS (lpj=2526945)
> [ 0.004006] pid_max: default: 32768 minimum: 301
> [ 0.004043] Security Framework initialized
> [ 0.004053] SELinux: Initializing.
> [ 0.004063] SELinux: Starting in permissive mode
> [ 0.005544] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> [ 0.009804] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.011821] Mount-cache hash table entries: 256
> [ 0.012083] Initializing cgroup subsys cpuacct
> [ 0.012087] Initializing cgroup subsys memory
> [ 0.012101] Initializing cgroup subsys devices
> [ 0.012103] Initializing cgroup subsys freezer
> [ 0.012104] Initializing cgroup subsys net_cls
> [ 0.012106] Initializing cgroup subsys blkio
> [ 0.012108] Initializing cgroup subsys perf_event
> [ 0.012140] Disabled fast string operations
> [ 0.012145] CPU: Physical Processor ID: 0
> [ 0.012146] CPU: Processor Core ID: 0
> [ 0.012148] mce: CPU supports 6 MCE banks
> [ 0.012156] CPU0: Thermal monitoring enabled (TM2)
> [ 0.012164] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
> Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
> tlb_flushall_shift: -1
> [ 0.012226] Freeing SMP alternatives: 24k freed
> [ 0.014051] ACPI: Core revision 20130117
> [ 0.020620] ACPI: All ACPI Tables successfully acquired
> [ 0.021011] ftrace: allocating 24409 entries in 96 pages
> [ 0.027091] dmar: Host address width 36
> [ 0.027093] dmar: DRHD base: 0x000000feb03000 flags: 0x0
> [ 0.027099] dmar: IOMMU 0: reg_base_addr feb03000 ver 1:0 cap c9008020e30260 ecap 1000
> [ 0.027100] dmar: DRHD base: 0x000000feb01000 flags: 0x0
> [ 0.027105] dmar: IOMMU 1: reg_base_addr feb01000 ver 1:0 cap c0000020630260 ecap 1000
> [ 0.027106] dmar: DRHD base: 0x000000feb00000 flags: 0x0
> [ 0.027110] dmar: IOMMU 2: reg_base_addr feb00000 ver 1:0 cap c0000020630270 ecap 1000
> [ 0.027112] dmar: DRHD base: 0x000000feb02000 flags: 0x1
> [ 0.027116] dmar: IOMMU 3: reg_base_addr feb02000 ver 1:0 cap c9008020630260 ecap 1000
> [ 0.027117] dmar: RMRR base: 0x000000fc226c00 end: 0x000000fc2273ff
> [ 0.027119] dmar: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
> [ 0.027631] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.037835] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz (fam: 06, model: 17, stepping: 0a)
> [ 0.038000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
> [ 0.038000] ... version: 2
> [ 0.038000] ... bit width: 40
> [ 0.038000] ... generic registers: 2
> [ 0.038000] ... value mask: 000000ffffffffff
> [ 0.038000] ... max period: 000000007fffffff
> [ 0.038000] ... fixed-purpose events: 3
> [ 0.038000] ... event mask: 0000000700000003
> [ 0.005000] Disabled fast string operations
> [ 0.038679] smpboot: Booting Node 0, Processors #1
> [ 0.050035] Brought up 2 CPUs
> [ 0.050039] smpboot: Total of 2 processors activated (10107.78 BogoMIPS)
> [ 0.050167] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [ 0.052046] devtmpfs: initialized
> [ 0.052173] PM: Registering ACPI NVS region [mem 0xbd6c6000-0xbd6d0fff] (45056 bytes)
> [ 0.052173] PM: Registering ACPI NVS region [mem 0xbd6d8000-0xbd6dbfff] (16384 bytes)
> [ 0.052173] PM: Registering ACPI NVS region [mem 0xbd6df000-0xbd705fff] (159744 bytes)
> [ 0.052173] PM: Registering ACPI NVS region [mem 0xbd90f000-0xbd99efff] (589824 bytes)
> [ 0.052528] atomic64 test passed for x86-64 platform with CX8 and with SSE
> [ 0.052528] RTC time: 13:44:06, date: 03/08/13
> [ 0.052528] NET: Registered protocol family 16
> [ 0.052557] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [ 0.052559] ACPI: bus type pci registered
> [ 0.052612] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
> [ 0.052615] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
> [ 0.060706] PCI: Using configuration type 1 for base access
> [ 0.062025] bio: create slab <bio-0> at 0
> [ 0.062053] ACPI: Added _OSI(Module Device)
> [ 0.062053] ACPI: Added _OSI(Processor Device)
> [ 0.062053] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.062053] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.064005] ACPI: EC: EC description table is found, configuring boot EC
> [ 0.068782] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 0.077314] ACPI: SSDT 00000000bd6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
> [ 0.077689] ACPI: Dynamic OEM Table Load:
> [ 0.077691] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
> [ 0.077792] ACPI: SSDT 00000000bd6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
> [ 0.078189] ACPI: Dynamic OEM Table Load:
> [ 0.078191] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
> [ 0.084182] ACPI: SSDT 00000000bd6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
> [ 0.084570] ACPI: Dynamic OEM Table Load:
> [ 0.084572] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
> [ 0.087056] ACPI: SSDT 00000000bd6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
> [ 0.087431] ACPI: Dynamic OEM Table Load:
> [ 0.087432] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
> [ 0.092089] ACPI: Interpreter enabled
> [ 0.092093] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
> [ 0.092099] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
> [ 0.092104] S3 S4 S5)
> [ 0.092111] ACPI: Using IOAPIC for interrupt routing
> [ 0.092132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.099038] ACPI: Power Resource [PUBS] (on)
> [ 0.103305] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 9 10 11)
> [ 0.103386] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.103465] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11)
> [ 0.103544] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.103622] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11)
> [ 0.103700] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11)
> [ 0.103778] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.103856] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
> [ 0.103903] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.104235] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
> [ 0.104532] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
> [ 0.104560] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
> [ 0.104585] PCI host bridge to bus 0000:00
> [ 0.104587] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.104589] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.104591] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.104593] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 0.104594] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
> [ 0.104596] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
> [ 0.104598] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
> [ 0.104599] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
> [ 0.104608] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
> [ 0.104627] DMAR: Forcing write-buffer flush capability
> [ 0.104628] DMAR: Disabling IOMMU for graphics on this chipset
> [ 0.104694] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
> [ 0.104706] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit]
> [ 0.104713] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.104718] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
> [ 0.104774] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
> [ 0.104784] pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit]
> [ 0.104873] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
> [ 0.104888] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit]
> [ 0.104935] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> [ 0.105047] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
> [ 0.105071] pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff]
> [ 0.105081] pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff]
> [ 0.105092] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
> [ 0.105179] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> [ 0.105206] pci 0000:00:19.0: System wakeup disabled by ACPI
> [ 0.105244] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
> [ 0.105298] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
> [ 0.105389] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 0.105425] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
> [ 0.105480] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
> [ 0.105585] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
> [ 0.105640] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
> [ 0.105729] pci 0000:00:1a.2: System wakeup disabled by ACPI
> [ 0.105776] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
> [ 0.105800] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff]
> [ 0.105907] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.105952] pci 0000:00:1a.7: System wakeup disabled by ACPI
> [ 0.105993] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
> [ 0.106016] pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit]
> [ 0.106111] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.106159] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 0.106195] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
> [ 0.106295] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.106325] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.106363] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
> [ 0.106462] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.106493] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [ 0.106531] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
> [ 0.106630] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.106664] pci 0000:00:1c.4: System wakeup disabled by ACPI
> [ 0.106705] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
> [ 0.106760] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
> [ 0.106844] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.106880] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
> [ 0.106935] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
> [ 0.107042] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
> [ 0.107097] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
> [ 0.107211] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
> [ 0.107236] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff]
> [ 0.107343] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.107383] pci 0000:00:1d.7: System wakeup disabled by ACPI
> [ 0.107420] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
> [ 0.107510] pci 0000:00:1e.0: System wakeup disabled by ACPI
> [ 0.107551] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
> [ 0.107737] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
> [ 0.107764] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
> [ 0.107774] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
> [ 0.107785] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
> [ 0.107796] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
> [ 0.107806] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
> [ 0.107817] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff]
> [ 0.107884] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.107945] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
> [ 0.107966] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit]
> [ 0.107994] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
> [ 0.108135] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [ 0.108272] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000
> [ 0.108316] pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit]
> [ 0.108517] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 0.110043] pci 0000:00:1c.1: PCI bridge to [bus 03]
> [ 0.110051] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
> [ 0.110126] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
> [ 0.110131] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
> [ 0.110135] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
> [ 0.110142] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
> [ 0.110196] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
> [ 0.110218] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
> [ 0.110220] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
> [ 0.110234] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff]
> [ 0.110270] pci 0000:15:00.0: supports D1 D2
> [ 0.110271] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.110321] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
> [ 0.110342] pci 0000:15:00.2: reg 10: [mem 0xf4801000-0xf48010ff]
> [ 0.110433] pci 0000:15:00.2: supports D1 D2
> [ 0.110434] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.110483] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
> [ 0.110503] pci 0000:15:00.4: reg 10: [mem 0xf4801800-0xf48018ff]
> [ 0.110593] pci 0000:15:00.4: supports D1 D2
> [ 0.110595] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.110644] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
> [ 0.110664] pci 0000:15:00.5: reg 10: [mem 0xf4801c00-0xf4801cff]
> [ 0.110757] pci 0000:15:00.5: supports D1 D2
> [ 0.110758] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.110851] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
> [ 0.110856] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
> [ 0.110860] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
> [ 0.110867] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
> [ 0.110869] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> [ 0.110871] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> [ 0.110872] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.110874] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
> [ 0.110876] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
> [ 0.110877] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
> [ 0.110879] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
> [ 0.110928] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
> [ 0.110933] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
> [ 0.112524] ACPI: Enabled 3 GPEs in block 00 to 3F
> [ 0.112558] acpi root: \_SB_.PCI0 notify handler is installed
> [ 0.112605] Found 1 acpi root devices
> [ 0.115055] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
> [ 0.116047] ACPI: ACPI Dock Station Driver: 3 docks/bays found
> [ 0.116081] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.116081] vgaarb: loaded
> [ 0.116081] vgaarb: bridge control possible 0000:00:02.0
> [ 0.116084] SCSI subsystem initialized
> [ 0.116086] ACPI: bus type scsi registered
> [ 0.116093] libata version 3.00 loaded.
> [ 0.116093] ACPI: bus type usb registered
> [ 0.116093] usbcore: registered new interface driver usbfs
> [ 0.116093] usbcore: registered new interface driver hub
> [ 0.116093] usbcore: registered new device driver usb
> [ 0.116093] PCI: Using ACPI for IRQ routing
> [ 0.117821] PCI: pci_cache_line_size set to 64 bytes
> [ 0.117900] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
> [ 0.117902] e820: reserve RAM buffer [mem 0xbd4a1000-0xbfffffff]
> [ 0.117904] e820: reserve RAM buffer [mem 0xbd5b7000-0xbfffffff]
> [ 0.117906] e820: reserve RAM buffer [mem 0xbd6c6000-0xbfffffff]
> [ 0.117908] e820: reserve RAM buffer [mem 0xbda00000-0xbfffffff]
> [ 0.117993] NetLabel: Initializing
> [ 0.117994] NetLabel: domain hash size = 128
> [ 0.117995] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.118010] NetLabel: unlabeled traffic allowed by default
> [ 0.118056] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> [ 0.118061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [ 0.118065] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> [ 0.120009] Switching to clocksource hpet
> [ 0.126103] pnp: PnP ACPI init
> [ 0.126116] ACPI: bus type pnp registered
> [ 0.146386] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.146389] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
> [ 0.146391] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
> [ 0.146393] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
> [ 0.146395] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
> [ 0.146400] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
> [ 0.146402] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
> [ 0.146404] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
> [ 0.146406] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
> [ 0.146408] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
> [ 0.146410] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
> [ 0.146412] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
> [ 0.146414] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
> [ 0.146418] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.166430] system 00:01: [io 0x1000-0x107f] has been reserved
> [ 0.166432] system 00:01: [io 0x1180-0x11ff] has been reserved
> [ 0.166435] system 00:01: [io 0x0800-0x080f] has been reserved
> [ 0.166437] system 00:01: [io 0x15e0-0x15ef] has been reserved
> [ 0.166439] system 00:01: [io 0x1600-0x167f] has been reserved
> [ 0.166441] system 00:01: [io 0x1680-0x169f] has been reserved
> [ 0.166443] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.166445] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.166447] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
> [ 0.166449] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 0.166451] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 0.166453] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
> [ 0.166455] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
> [ 0.166458] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.166508] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 0.166516] pnp 00:03: [dma 4]
> [ 0.166532] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.166556] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.166588] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.166616] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.166642] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
> [ 0.166671] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
> [ 0.187030] pnp: PnP ACPI: found 9 devices
> [ 0.187032] ACPI: ACPI bus type pnp unregistered
> [ 0.193674] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
> [ 0.193678] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
> [ 0.193680] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
> [ 0.193690] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
> [ 0.193693] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
> [ 0.193724] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
> [ 0.193726] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> [ 0.193728] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> [ 0.193730] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> [ 0.193731] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> [ 0.193736] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
> [ 0.193739] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.193742] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.193745] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
> [ 0.193747] pci 0000:00:1c.1: BAR 13: assigned [io 0x8000-0x8fff]
> [ 0.193750] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [ 0.193754] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
> [ 0.193759] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
> [ 0.193764] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.193771] pci 0000:00:1c.1: PCI bridge to [bus 03]
> [ 0.193774] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
> [ 0.193779] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
> [ 0.193783] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.193790] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
> [ 0.193793] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
> [ 0.193799] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
> [ 0.193803] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
> [ 0.193811] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
> [ 0.193813] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
> [ 0.193815] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
> [ 0.193817] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
> [ 0.193819] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
> [ 0.193823] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
> [ 0.193824] pci 0000:15:00.0: BAR 13: assigned [io 0x4000-0x40ff]
> [ 0.193826] pci 0000:15:00.0: BAR 14: assigned [io 0x4400-0x44ff]
> [ 0.193829] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
> [ 0.193830] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff]
> [ 0.193835] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff]
> [ 0.193839] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
> [ 0.193843] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
> [ 0.193848] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
> [ 0.193851] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
> [ 0.193856] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
> [ 0.193860] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
> [ 0.193975] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.194013] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.194015] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.194017] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.194019] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
> [ 0.194020] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
> [ 0.194022] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
> [ 0.194024] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
> [ 0.194026] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
> [ 0.194027] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
> [ 0.194029] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.194031] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
> [ 0.194033] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
> [ 0.194035] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.194036] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
> [ 0.194038] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
> [ 0.194040] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref]
> [ 0.194042] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff]
> [ 0.194043] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff]
> [ 0.194045] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
> [ 0.194047] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
> [ 0.194049] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
> [ 0.194050] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.194052] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
> [ 0.194054] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
> [ 0.194055] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
> [ 0.194057] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff]
> [ 0.194059] pci_bus 0000:16: resource 0 [io 0x4000-0x40ff]
> [ 0.194061] pci_bus 0000:16: resource 1 [io 0x4400-0x44ff]
> [ 0.194063] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
> [ 0.194064] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
> [ 0.194099] NET: Registered protocol family 2
> [ 0.194327] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.194811] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.195230] TCP: Hash tables configured (established 65536 bind 65536)
> [ 0.195288] TCP: reno registered
> [ 0.195302] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.195365] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.195474] NET: Registered protocol family 1
> [ 0.195485] pci 0000:00:02.0: Boot video device
> [ 0.195498] pci 0000:00:1a.0: power state changed by ACPI to D0
> [ 0.195641] pci 0000:00:1a.2: power state changed by ACPI to D0
> [ 0.195799] pci 0000:00:1d.0: power state changed by ACPI to D0
> [ 0.196113] PCI: CLS 64 bytes, default 64
> [ 0.196152] Unpacking initramfs...
> [ 0.744148] Freeing initrd memory: 30840k freed
> [ 0.760504] dmar: Device scope device [0000:00:03.02] not found
> [ 0.760508] dmar: Device scope device [0000:00:03.03] not found
> [ 0.760515] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.760518] software IO TLB [mem 0xb94a1000-0xbd4a1000] (64MB) mapped at [ffff8800b94a1000-ffff8800bd4a0fff]
> [ 0.760576] Simple Boot Flag at 0x35 set to 0x1
> [ 0.761000] Initialise system trusted keyring
> [ 0.761079] audit: initializing netlink socket (disabled)
> [ 0.761094] type=2000 audit(1362750246.760:1): initialized
> [ 0.783251] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.785106] VFS: Disk quotas dquot_6.5.2
> [ 0.785147] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.785524] msgmni has been set to 15753
> [ 0.785580] SELinux: Registering netfilter hooks
> [ 0.786083] alg: No test for stdrng (krng)
> [ 0.786091] NET: Registered protocol family 38
> [ 0.786094] Key type asymmetric registered
> [ 0.786096] Asymmetric key parser 'x509' registered
> [ 0.786097] Asymmetric key parser 'pefile' registered
> [ 0.786130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 0.786159] io scheduler noop registered
> [ 0.786161] io scheduler deadline registered (default)
> [ 0.786168] io scheduler cfq registered
> [ 0.786326] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
> [ 0.786467] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
> [ 0.786613] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
> [ 0.786729] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
> [ 0.786735] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
> [ 0.786753] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
> [ 0.786755] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
> [ 0.786760] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
> [ 0.786781] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
> [ 0.786785] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
> [ 0.786798] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.786844] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 17aa ss_did 20f3
> [ 0.786866] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
> [ 0.786878] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 17aa ss_did 20f3
> [ 0.786896] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
> [ 0.786908] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 17aa ss_did 20f3
> [ 0.786925] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
> [ 0.786930] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.786931] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.787106] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
> [ 0.787107] vesafb: scrolling: redraw
> [ 0.787109] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 0.788296] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 7552k, total 7552k
> [ 0.788375] Console: switching to colour frame buffer device 200x75
> [ 0.846978] fb0: VESA VGA frame buffer device
> [ 0.846987] intel_idle: does not run on family 6 model 23
> [ 0.847285] ACPI: AC Adapter [AC] (on-line)
> [ 0.847429] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
> [ 0.847615] ACPI: Lid Switch [LID]
> [ 0.847647] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
> [ 0.847650] ACPI: Sleep Button [SLPB]
> [ 0.847692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 0.847694] ACPI: Power Button [PWRF]
> [ 0.847757] ACPI: Requesting acpi_cpufreq
> [ 0.848768] Monitor-Mwait will be used to enter C-1 state
> [ 0.848774] Monitor-Mwait will be used to enter C-2 state
> [ 0.848778] Monitor-Mwait will be used to enter C-3 state
> [ 0.848781] tsc: Marking TSC unstable due to TSC halts in idle
> [ 0.848790] ACPI: acpi_idle registered with cpuidle
> [ 0.892209] thermal LNXTHERM:00: registered as thermal_zone0
> [ 0.892211] ACPI: Thermal Zone [THM0] (48 C)
> [ 0.898875] thermal LNXTHERM:01: registered as thermal_zone1
> [ 0.898878] ACPI: Thermal Zone [THM1] (48 C)
> [ 0.898910] GHES: HEST is not enabled!
> [ 0.899035] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.899627] Non-volatile memory driver v1.3
> [ 0.899629] Linux agpgart interface v0.103
> [ 0.899741] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
> [ 0.899910] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
> [ 0.901815] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
> [ 0.902055] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
> [ 0.902888] loop: module loaded
> [ 0.902990] ahci 0000:00:1f.2: version 3.0
> [ 0.903146] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
> [ 0.903183] ahci: SSS flag set, parallel bus scan disabled
> [ 0.903208] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
> [ 0.903211] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
> [ 0.903216] ahci 0000:00:1f.2: setting latency timer to 64
> [ 0.903714] scsi0 : ahci
> [ 0.903790] scsi1 : ahci
> [ 0.903846] scsi2 : ahci
> [ 0.903904] scsi3 : ahci
> [ 0.903975] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 43
> [ 0.903978] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 43
> [ 0.903979] ata3: DUMMY
> [ 0.903980] ata4: DUMMY
> [ 0.904114] libphy: Fixed MDIO Bus: probed
> [ 0.904278] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.904280] ehci-pci: EHCI PCI platform driver
> [ 0.904356] ehci-pci 0000:00:1a.7: setting latency timer to 64
> [ 0.904360] ehci-pci 0000:00:1a.7: EHCI Host Controller
> [ 0.904396] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
> [ 0.904410] ehci-pci 0000:00:1a.7: debug port 1
> [ 0.908337] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
> [ 0.908355] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfc226c00
> [ 0.913647] ACPI: Battery Slot [BAT0] (battery present)
> [ 0.914013] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 0.914048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.914050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.914052] usb usb1: Product: EHCI Host Controller
> [ 0.914054] usb usb1: Manufacturer: Linux 3.9.0-0.rc1.git0.5.fc19.x86_64 ehci_hcd
> [ 0.914055] usb usb1: SerialNumber: 0000:00:1a.7
> [ 0.914154] hub 1-0:1.0: USB hub found
> [ 0.914158] hub 1-0:1.0: 6 ports detected
> [ 0.914393] ehci-pci 0000:00:1d.7: setting latency timer to 64
> [ 0.914397] ehci-pci 0000:00:1d.7: EHCI Host Controller
> [ 0.914436] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
> [ 0.914450] ehci-pci 0000:00:1d.7: debug port 1
> [ 0.918348] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
> [ 0.918361] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfc227000
> [ 0.924016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 0.924046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.924048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.924050] usb usb2: Product: EHCI Host Controller
> [ 0.924051] usb usb2: Manufacturer: Linux 3.9.0-0.rc1.git0.5.fc19.x86_64 ehci_hcd
> [ 0.924053] usb usb2: SerialNumber: 0000:00:1d.7
> [ 0.928216] hub 2-0:1.0: USB hub found
> [ 0.928220] hub 2-0:1.0: 6 ports detected
> [ 0.928279] Monitor-Mwait will be used to enter C-3 state
> [ 0.928575] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.928585] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.928664] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 0.928669] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 0.928713] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> [ 0.928748] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
> [ 0.928781] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.928784] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.928785] usb usb3: Product: UHCI Host Controller
> [ 0.928787] usb usb3: Manufacturer: Linux 3.9.0-0.rc1.git0.5.fc19.x86_64 uhci_hcd
> [ 0.928789] usb usb3: SerialNumber: 0000:00:1a.0
> [ 0.928876] hub 3-0:1.0: USB hub found
> [ 0.928880] hub 3-0:1.0: 2 ports detected
> [ 0.929009] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 0.929013] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 0.929053] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> [ 0.929087] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
> [ 0.929116] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.929118] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.929120] usb usb4: Product: UHCI Host Controller
> [ 0.929121] usb usb4: Manufacturer: Linux 3.9.0-0.rc1.git0.5.fc19.x86_64 uhci_hcd
> [ 0.929123] usb usb4: SerialNumber: 0000:00:1a.1
> [ 0.929201] hub 4-0:1.0: USB hub found
> [ 0.929204] hub 4-0:1.0: 2 ports detected
> [ 0.929324] uhci_hcd 0000:00:1a.2: setting latency timer to 64
> [ 0.929327] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> [ 0.929368] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
> [ 0.929400] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
> [ 0.929429] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.929431] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.929432] usb usb5: Product: UHCI Host Controller
> [ 0.929434] usb usb5: Manufacturer: Linux 3.9.0-0.rc1.git0.5.fc19.x86_64 uhci_hcd
> [ 0.929436] usb usb5: SerialNumber: 0000:00:1a.2
> [ 0.929517] hub 5-0:1.0: USB hub found
> [ 0.929520] hub 5-0:1.0: 2 ports detected
> [ 0.929639] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 0.929642] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 0.929689] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
> [ 0.929722] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
> [ 0.929751] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.929753] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.929754] usb usb6: Product: UHCI Host Controller
> [ 0.929756] usb usb6: Manufacturer: Linux 3.9.0-0.rc1.git0.5.fc19.x86_64 uhci_hcd
> [ 0.929758] usb usb6: SerialNumber: 0000:00:1d.0
> [ 0.929836] hub 6-0:1.0: USB hub found
> [ 0.929842] hub 6-0:1.0: 2 ports detected
> [ 0.929959] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 0.929962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 0.930011] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
> [ 0.930043] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
> [ 0.930072] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.930074] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.930075] usb usb7: Product: UHCI Host Controller
> [ 0.930077] usb usb7: Manufacturer: Linux 3.9.0-0.rc1.git0.5.fc19.x86_64 uhci_hcd
> [ 0.930079] usb usb7: SerialNumber: 0000:00:1d.1
> [ 0.930160] hub 7-0:1.0: USB hub found
> [ 0.930164] hub 7-0:1.0: 2 ports detected
> [ 0.930284] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 0.930287] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 0.930325] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
> [ 0.930359] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
> [ 0.930390] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.930392] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.930394] usb usb8: Product: UHCI Host Controller
> [ 0.930395] usb usb8: Manufacturer: Linux 3.9.0-0.rc1.git0.5.fc19.x86_64 uhci_hcd
> [ 0.930397] usb usb8: SerialNumber: 0000:00:1d.2
> [ 0.930480] hub 8-0:1.0: USB hub found
> [ 0.930484] hub 8-0:1.0: 2 ports detected
> [ 0.930619] usbcore: registered new interface driver usbserial
> [ 0.930626] usbcore: registered new interface driver usbserial_generic
> [ 0.930631] usbserial: USB Serial support registered for generic
> [ 0.930663] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> [ 0.939032] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.939037] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.939115] mousedev: PS/2 mouse device common for all mice
> [ 0.939286] rtc_cmos 00:06: RTC can wake from S4
> [ 0.939431] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> [ 0.939460] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> [ 0.939518] device-mapper: uevent: version 1.0.3
> [ 0.939580] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
> [ 0.939642] cpuidle: using governor ladder
> [ 0.939679] cpuidle: using governor menu
> [ 0.939963] EFI Variables Facility v0.08 2004-May-17
> [ 0.939978] hidraw: raw HID events driver (C) Jiri Kosina
> [ 0.940065] usbcore: registered new interface driver usbhid
> [ 0.940066] usbhid: USB HID core driver
> [ 0.940085] drop_monitor: Initializing network drop monitor service
> [ 0.940152] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 0.940182] TCP: cubic registered
> [ 0.940184] Initializing XFRM netlink socket
> [ 0.940287] NET: Registered protocol family 10
> [ 0.940446] mip6: Mobile IPv6
> [ 0.940448] NET: Registered protocol family 17
> [ 0.940727] PM: Hibernation image not present or could not be loaded.
> [ 0.940728] Loading compiled-in X.509 certificates
> [ 0.941717] Loaded X.509 cert 'Fedora kernel signing key: 56b865f7669446a039dbd72b05436a8504be0543'
> [ 0.941725] registered taskstats version 1
> [ 0.942622] Magic number: 5:643:735
> [ 0.945393] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> [ 1.260841] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.266821] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 1.266830] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [ 1.266906] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 1.266913] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [ 1.311081] ata1.00: ATA-8: WDC WD1600BEVS-08VAT2, 14.01A14, max UDMA/133
> [ 1.311089] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [ 1.312670] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 1.312678] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [ 1.312801] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 1.312809] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [ 1.314202] ata1.00: configured for UDMA/133
> [ 1.314503] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 14.0 PQ: 0 ANSI: 5
> [ 1.314834] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.314847] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
> [ 1.315048] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.315056] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.315177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.319292] sda: sda1 sda2 sda3
> [ 1.320272] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.567264] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [ 1.620087] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.623126] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
> [ 1.623964] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
> [ 1.625775] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AC, SB01, max UDMA/33
> [ 1.629167] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
> [ 1.629988] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
> [ 1.631797] ata2.00: configured for UDMA/33
> [ 1.634739] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AC SB01 PQ: 0 ANSI: 5
> [ 1.636956] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 1.636963] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.637237] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 1.637485] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 1.640943] Freeing unused kernel memory: 1356k freed
> [ 1.641771] Write protecting the kernel read-only data: 12288k
> [ 1.653434] Freeing unused kernel memory: 1708k freed
> [ 1.661862] Freeing unused kernel memory: 1324k freed
> [ 1.786089] RPC: Registered named UNIX socket transport module.
> [ 1.786092] RPC: Registered udp transport module.
> [ 1.786093] RPC: Registered tcp transport module.
> [ 1.786094] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 1.795152] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000, board id: 71, fw id: 434116
> [ 1.795158] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
> [ 1.816537] usb 1-1: New USB device found, idVendor=046d, idProduct=0990
> [ 1.816539] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
> [ 1.816541] usb 1-1: SerialNumber: B4261720
> [ 1.836908] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
> [ 1.932341] wmi: Mapper loaded
> [ 1.938671] [drm] Initialized drm 1.1.0 20060810
> [ 1.938975] pps_core: LinuxPPS API ver. 1 registered
> [ 1.938978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 1.942334] PTP clock support registered
> [ 1.953441] [drm] Memory usable by graphics device = 2048M
> [ 1.953446] checking generic (d0000000 760000) vs hw (d0000000 10000000)
> [ 1.953448] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
> [ 1.953468] Console: switching to colour dummy device 80x25
> [ 1.953574] i915 0000:00:02.0: setting latency timer to 64
> [ 1.953666] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
> [ 1.958987] sdhci: Secure Digital Host Controller Interface driver
> [ 1.958989] sdhci: Copyright(c) Pierre Ossman
> [ 1.961889] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k
> [ 1.961891] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> [ 1.997815] i915 0000:00:02.0: irq 44 for MSI/MSI-X
> [ 1.997824] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 1.997826] [drm] Driver supports precise vblank timestamp query.
> [ 1.997877] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 2.078158] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
> [ 2.078168] yenta_cardbus 0000:15:00.0: Socket status: 30000006
> [ 2.078174] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x7fff]
> [ 2.078176] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff]
> [ 2.078184] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff:
> [ 2.078273] excluding 0xf4800000-0xf4b7ffff
> [ 2.078364] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
> [ 2.078366] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff:
> [ 2.078948] excluding 0xf0000000-0xf3ffffff
> [ 2.079649] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
> [ 2.080778] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
> [ 2.081803] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
> [ 2.082461] fbcon: inteldrmfb (fb0) is primary device
> [ 2.103060] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
> [ 2.140290] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
> [ 2.175158] Console: switching to colour frame buffer device 240x75
> [ 2.195689] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 2.195690] i915 0000:00:02.0: registered panic notifier
> [ 2.201084] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
> [ 2.205575] acpi device:01: registered as cooling_device2
> [ 2.205646] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> [ 2.205823] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
> [ 2.206585] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 2.206706] e1000e 0000:00:19.0: setting latency timer to 64
> [ 2.206835] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
> [ 2.206912] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
> [ 2.249033] usb 6-1: new low-speed USB device number 2 using uhci_hcd
> [ 2.271005] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
> [ 2.346170] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
> [ 2.396934] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:68:0c:96:e3
> [ 2.396946] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
> [ 2.396991] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
> [ 2.421784] usb 6-1: New USB device found, idVendor=045e, idProduct=00cb
> [ 2.421798] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 2.421800] usb 6-1: Product: Microsoft Basic Optical Mouse v2.0
> [ 2.421802] usb 6-1: Manufacturer: Microsoft
> [ 2.449350] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input6
> [ 2.449557] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.0-1/input0
> [ 2.505061] bio: create slab <bio-1> at 1
> [ 2.655101] usb 6-2: new full-speed USB device number 3 using uhci_hcd
> [ 2.901843] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
> [ 2.947806] usb 6-2: New USB device found, idVendor=0557, idProduct=2004
> [ 2.947825] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 2.947832] usb 6-2: Product: UC100KM V2.10
> [ 2.947837] usb 6-2: Manufacturer: ATEN
> [ 2.968796] input: ATEN UC100KM V2.10 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input7
> [ 2.969451] hid-generic 0003:0557:2004.0002: input,hidraw1: USB HID v1.00 Keyboard [ATEN UC100KM V2.10] on usb-0000:00:1d.0-2/input0
> [ 2.991716] input: ATEN UC100KM V2.10 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input8
> [ 2.992227] hid-generic 0003:0557:2004.0003: input,hidraw2: USB HID v1.00 Mouse [ATEN UC100KM V2.10] on usb-0000:00:1d.0-2/input1
> [ 3.301886] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
> [ 3.538457] irq 16: nobody cared (try booting with the "irqpoll" option)
> [ 3.538463] Pid: 0, comm: swapper/1 Not tainted 3.9.0-0.rc1.git0.5.fc19.x86_64 #1
> [ 3.538464] Call Trace:
> [ 3.538466] <IRQ> [<ffffffff810ee1f2>] __report_bad_irq+0x32/0xd0
> [ 3.538475] [<ffffffff810ee608>] note_interrupt+0x138/0x1f0
> [ 3.538479] [<ffffffff814f0461>] ? cpuidle_wrap_enter+0x41/0x80
> [ 3.538482] [<ffffffff814efae0>] ? intel_pstate_timer_func+0x350/0x350
> [ 3.538485] [<ffffffff810ebfc1>] handle_irq_event_percpu+0xe1/0x1e0
> [ 3.538488] [<ffffffff814efae0>] ? intel_pstate_timer_func+0x350/0x350
> [ 3.538490] [<ffffffff810ec0f6>] handle_irq_event+0x36/0x60
> [ 3.538493] [<ffffffff810ef145>] handle_fasteoi_irq+0x55/0xf0
> [ 3.538496] [<ffffffff810151ef>] handle_irq+0xbf/0x150
> [ 3.538500] [<ffffffff81649e5a>] ? atomic_notifier_call_chain+0x1a/0x20
> [ 3.538503] [<ffffffff8164ff0d>] do_IRQ+0x4d/0xc0
> [ 3.538505] [<ffffffff816461ad>] common_interrupt+0x6d/0x6d
> [ 3.538506] <EOI> [<ffffffff814f0461>] ? cpuidle_wrap_enter+0x41/0x80
> [ 3.538511] [<ffffffff814f04b0>] cpuidle_enter_tk+0x10/0x20
> [ 3.538513] [<ffffffff814f0212>] cpuidle_idle_call+0xb2/0x1e0
> [ 3.538516] [<ffffffff8101c025>] cpu_idle+0xe5/0x140
> [ 3.538520] [<ffffffff81634226>] start_secondary+0x249/0x24b
> [ 3.538522] handlers:
> [ 3.538525] [<ffffffff81458bf0>] usb_hcd_irq
> [ 3.538530] [<ffffffffa0173a00>] yenta_interrupt [yenta_socket]
> [ 3.538531] Disabling IRQ #16
> [ 5.281769] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
> [ 6.022427] SELinux: Disabled at runtime.
> [ 6.022494] SELinux: Unregistering netfilter hooks
> [ 6.260082] type=1404 audit(1362750252.259:2): selinux=0 auid=4294967295 ses=4294967295
> [ 8.967056] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
> [ 9.211142] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
> [ 10.506770] EXT4-fs (dm-1): re-mounted. Opts: (null)
> [ 11.387958] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 12.027499] tun: Universal TUN/TAP device driver, 1.6
> [ 12.027508] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [ 13.385148] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0c
> [ 13.647354] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0c
> [ 13.647577] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 15.191106] Adding 3948540k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:3948540k
> [ 16.245335] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> [ 16.255823] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130117/utaddress-251)
> [ 16.255838] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 16.255847] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130117/utaddress-251)
> [ 16.255856] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 16.255860] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130117/utaddress-251)
> [ 16.255869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 16.255873] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 16.309505] thinkpad_acpi: ThinkPad ACPI Extras v0.24
> [ 16.309507] thinkpad_acpi: http://ibm-acpi.sf.net/
> [ 16.309509] thinkpad_acpi: ThinkPad BIOS 6FET93WW (3.23 ), EC 7VHT16WW-1.06
> [ 16.309510] thinkpad_acpi: Lenovo ThinkPad W500, model 4058CTO
> [ 16.330444] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
> [ 16.330616] thinkpad_acpi: radio switch found; radios are disabled
> [ 16.330633] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
> [ 16.330635] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
> [ 16.334361] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
> [ 16.334421] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
> [ 16.336087] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
> [ 16.486199] r592: driver successfully loaded
> [ 16.929605] iTCO_vendor_support: vendor-support=0
> [ 17.051207] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> [ 17.051280] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
> [ 17.051520] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 17.466064] media: Linux media interface: v0.10
> [ 17.523768] cfg80211: Calling CRDA to update world regulatory domain
> [ 17.643441] Linux video capture interface: v2.00
> [ 17.989437] cfg80211: World regulatory domain updated:
> [ 17.989445] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 17.989451] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 17.989456] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 17.989461] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> [ 17.989466] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 17.989470] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 18.047565] Intel(R) Wireless WiFi driver for Linux, in-tree:d
> [ 18.047572] Copyright(c) 2003-2013 Intel Corporation
> [ 18.047927] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
> [ 18.066621] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
> [ 18.083256] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input11
> [ 18.083439] usbcore: registered new interface driver uvcvideo
> [ 18.083444] USB Video Class driver (1.1.1)
> [ 18.108898] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
> [ 18.712924] ALSA sound/usb/mixer.c:930 5:2: cannot get min/max values for control 2 (id 5)
> [ 18.713528] usbcore: registered new interface driver snd-usb-audio
> [ 18.793339] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
> [ 18.793348] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
> [ 18.793354] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
> [ 18.793359] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
> [ 18.793363] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
> [ 18.793370] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
> [ 18.793410] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
> [ 18.793818] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
> [ 18.824343] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
> [ 18.857964] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
> [ 19.002676] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
> [ 19.002676] ALSA sound/pci/hda/hda_auto_parser.c:335 autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
> [ 19.002676] ALSA sound/pci/hda/hda_auto_parser.c:339 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 19.002676] ALSA sound/pci/hda/hda_auto_parser.c:343 hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
> [ 19.002676] ALSA sound/pci/hda/hda_auto_parser.c:344 mono: mono_out=0x0
> [ 19.002676] ALSA sound/pci/hda/hda_auto_parser.c:347 dig-out=0x1c/0x0
> [ 19.002676] ALSA sound/pci/hda/hda_auto_parser.c:348 inputs:
> [ 19.002676] ALSA sound/pci/hda/hda_auto_parser.c:352 Mic=0x18
> [ 19.002676] ALSA sound/pci/hda/hda_auto_parser.c:352 Internal Mic=0x1d
> [ 19.002676] ALSA sound/pci/hda/hda_auto_parser.c:352 Dock Mic=0x17
> [ 19.002676] ALSA sound/pci/hda/patch_conexant.c:3402 hda_codec: Enable sync_write for stable communication
> [ 19.017975] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
> [ 19.018092] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
> [ 19.018152] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
> [ 19.018207] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
> [ 23.156571] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
> [ 24.218894] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
> [ 30.143895] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
> [ 30.244192] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
> [ 30.244383] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 30.421616] Bridge firewalling registered
> [ 32.718939] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
> [ 32.719150] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 36.682554] NFSD: starting 90-second grace period (net ffffffff81cbb000)
> [ 46.220573] Ebtables v2.0 registered
> [ 46.417191] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 46.605109] cgroup: libvirtd (907) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
> [ 46.605113] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
> [ 46.605167] cgroup: libvirtd (907) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
> [ 46.605221] cgroup: libvirtd (907) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2013-03-08 21:33 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 19:12 [3.9-rc1] very poor interrupt responses Shawn Starr
2013-03-08 21:33 ` Peter Hurley [this message]
2013-03-09 2:19 ` [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Alan Stern
2013-03-09 8:53 ` Thomas Meyer
2013-03-09 13:07 ` Peter Hurley
2013-03-13 21:35 ` Jiri Kosina
2013-03-14 14:51 ` Alan Stern
2013-03-14 14:51 ` Alan Stern
2013-03-14 14:56 ` Jiri Kosina
2013-03-14 15:18 ` Alan Stern
2013-03-14 15:18 ` Alan Stern
2013-03-14 15:39 ` Jiri Kosina
2013-03-14 15:47 ` Jiri Kosina
2013-03-14 16:10 ` Alan Stern
2013-03-14 16:10 ` Alan Stern
2013-03-14 16:13 ` Alan Stern
2013-03-14 16:13 ` Alan Stern
2013-03-14 16:09 ` Jiri Kosina
2013-03-14 16:42 ` Peter Hurley
2013-03-14 16:46 ` Rafael J. Wysocki
2013-03-14 17:06 ` Peter Hurley
2013-03-14 17:22 ` Rafael J. Wysocki
2013-03-14 17:26 ` Peter Hurley
2013-03-15 7:59 ` Jiri Kosina
2013-03-15 9:20 ` Harald Arnesen
2013-03-15 13:33 ` Jiri Kosina
2013-03-15 13:33 ` Jiri Kosina
2013-03-15 15:14 ` Jiri Kosina
2013-03-15 19:14 ` Yinghai Lu
2013-03-18 2:41 ` Shawn Starr
2013-03-18 9:12 ` Jiri Kosina
2013-03-18 18:57 ` Yinghai Lu
2013-03-18 22:05 ` Jiri Kosina
2013-03-18 22:50 ` Yinghai Lu
[not found] ` <alpine.LNX.2.00.1303181010080.9529-ztGlSCb7Y1iN3ZZ/Hiejyg@public.gmane.org>
2013-03-18 19:19 ` Daniel Vetter
2013-03-18 19:19 ` Daniel Vetter
2013-03-18 19:57 ` Chris Wilson
2013-03-18 22:04 ` Jiri Kosina
2013-03-15 15:32 ` Greg KH
2013-03-15 15:37 ` Jiri Kosina
2013-03-15 15:47 ` Greg KH
2013-03-15 16:21 ` Jiri Kosina
2013-03-18 8:21 ` Daniel Vetter
2013-03-18 15:56 ` [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) Jiri Kosina
2013-03-18 17:04 ` Chris Wilson
2013-03-19 8:56 ` Jiri Kosina
2013-03-19 9:03 ` Chris Wilson
2013-03-18 19:21 ` Daniel Vetter
2013-03-18 11:13 ` [PATCH] drm/i915: Flush writes to GMBUS registers Chris Wilson
2013-03-18 11:51 ` Jiri Kosina
2013-03-18 12:48 ` Chris Wilson
2013-03-14 18:48 ` [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Yinghai Lu
2013-03-11 3:38 ` [3.9-rc1] very poor interrupt responses Rafael J. Wysocki
2013-03-11 10:09 ` Harald Arnesen
2013-03-11 14:55 ` Rafael J. Wysocki
2013-03-18 7:14 [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Thomas Meyer
2013-03-18 7:14 ` Thomas Meyer
2013-03-18 7:14 ` Thomas Meyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362778382.20990.17.camel@thor.lan \
--to=peter@hurleysoftware.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=shawn.starr@rogers.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.