From: Jiri Kosina <jkosina@suse.cz>
To: Peter Hurley <peter@hurleysoftware.com>
Cc: Thomas Meyer <thomas@m3y3r.de>,
Shawn Starr <shawn.starr@rogers.com>,
Alan Stern <stern@rowland.harvard.edu>,
Kernel development list <linux-kernel@vger.kernel.org>,
USB list <linux-usb@vger.kernel.org>,
linux-acpi@vger.kernel.org, "Rafael J. Wysocki" <rjw@sisk.pl>,
Bjorn Helgaas <bhelgaas@google.com>,
linux-pci@vger.kernel.org
Subject: Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)
Date: Wed, 13 Mar 2013 22:35:10 +0100 (CET) [thread overview]
Message-ID: <alpine.LRH.2.00.1303132233080.27467@twin.jikos.cz> (raw)
In-Reply-To: <1362834476.7755.33.camel@thor.lan>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 2566 bytes --]
OK, this is a "me too", on Thinkpad x200s.
[ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186
[ 4.116850] Call Trace:
[ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0
[ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240
[ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230
[ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70
[ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100
[ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150
[ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80
[ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0
[ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d
[ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0
[ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560
[ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630
[ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130
[ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630
[ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0
[ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40
[ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120
[ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90
[ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360
[ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10
[ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0
[ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30
[ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220
[ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70
[ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0
[ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0
[ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280
[ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110
[ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0
[ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130
[ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0
[ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b
[ 4.116943] handlers:
[ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore]
[ 4.116960] Disabling IRQ #16
I don't think I have seen this message on rc1+ (8343bce, to be precise),
but I have definitely seen sluggish system response on that kernel as
well.
Attaching lspci, /proc/interrupts and dmesg.
--
Jiri Kosina
SUSE Labs
[-- Attachment #2: Type: TEXT/plain, Size: 68458 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-rc2-00188-g6c23cbb (jkosina@noe) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #186 SMP Wed Mar 13 22:14:20 CET 2013
[ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c4a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c4a1000-0x000000007c4a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c4a7000-0x000000007c5b6fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c5b7000-0x000000007c60efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c60f000-0x000000007c6c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c6c6000-0x000000007c6d0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c6d1000-0x000000007c6d3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c6d4000-0x000000007c6d7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c6d8000-0x000000007c6dbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c6dc000-0x000000007c6defff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c6df000-0x000000007c705fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c706000-0x000000007c707fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c708000-0x000000007c90efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c90f000-0x000000007c99efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c99f000-0x000000007c9fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c9ff000-0x000000007c9fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ca00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f73c0-0x000f73cf] mapped at [ffff8800000f73c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 28672
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01d87000, 0x01d87fff] PGTABLE
[ 0.000000] BRK [0x01d88000, 0x01d88fff] PGTABLE
[ 0.000000] BRK [0x01d89000, 0x01d89fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c200000-0x7c3fffff]
[ 0.000000] [mem 0x7c200000-0x7c3fffff] page 2M
[ 0.000000] BRK [0x01d8a000, 0x01d8afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7c1fffff]
[ 0.000000] [mem 0x7c000000-0x7c1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x78000000-0x7bffffff]
[ 0.000000] [mem 0x78000000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x77ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x77ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7c400000-0x7c4a0fff]
[ 0.000000] [mem 0x7c400000-0x7c4a0fff] page 4k
[ 0.000000] BRK [0x01d8b000, 0x01d8bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c4a7000-0x7c5b6fff]
[ 0.000000] [mem 0x7c4a7000-0x7c5b6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7c60f000-0x7c6c5fff]
[ 0.000000] [mem 0x7c60f000-0x7c6c5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7c9ff000-0x7c9fffff]
[ 0.000000] [mem 0x7c9ff000-0x7c9fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x36b1f000-0x37feffff]
[ 0.000000] ACPI: RSDP 00000000000f7380 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000007c97bdcc 0009C (v01 LENOVO TP-6D 00002020 LTP 00000000)
[ 0.000000] ACPI: FACP 000000007c97bf00 000F4 (v03 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: DSDT 000000007c97c2f4 0D889 (v01 LENOVO TP-6D 00002020 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007c98e000 00040
[ 0.000000] ACPI: SSDT 000000007c97c0b4 00240 (v01 LENOVO TP-6D 00002020 MSFT 03000000)
[ 0.000000] ACPI: ECDT 000000007c989b7d 00052 (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: APIC 000000007c989bcf 00078 (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: MCFG 000000007c989c47 0003C (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: HPET 000000007c989c83 00038 (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: SLIC 000000007c989dc2 00176 (v01 LENOVO TP-6D 00002020 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000007c989f38 00028 (v01 LENOVO TP-6D 00002020 LTP 00000001)
[ 0.000000] ACPI: ASF! 000000007c989f60 000A0 (v16 LENOVO TP-6D 00002020 PTL 00000001)
[ 0.000000] ACPI: SSDT 000000007c98d203 0055F (v01 LENOVO TP-6D 00002020 INTL 20050513)
[ 0.000000] ACPI: TCPA 000000007c707000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: DMAR 000000007c706000 00120 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: SSDT 000000007c6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007c6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007c6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007c9fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7c9fffff]
[ 0.000000] NODE_DATA [mem 0x7c6b1000-0x7c6c4fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079c00000-ffff88007b7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x7c4a0fff]
[ 0.000000] node 0: [mem 0x7c4a7000-0x7c5b6fff]
[ 0.000000] node 0: [mem 0x7c60f000-0x7c6c5fff]
[ 0.000000] node 0: [mem 0x7c9ff000-0x7c9fffff]
[ 0.000000] On node 0 totalpages: 509446
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6923 pages used for memmap
[ 0.000000] DMA32 zone: 505449 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007c4a1000 - 000000007c4a7000
[ 0.000000] PM: Registered nosave memory: 000000007c5b7000 - 000000007c60f000
[ 0.000000] PM: Registered nosave memory: 000000007c6c6000 - 000000007c6d1000
[ 0.000000] PM: Registered nosave memory: 000000007c6d1000 - 000000007c6d4000
[ 0.000000] PM: Registered nosave memory: 000000007c6d4000 - 000000007c6d8000
[ 0.000000] PM: Registered nosave memory: 000000007c6d8000 - 000000007c6dc000
[ 0.000000] PM: Registered nosave memory: 000000007c6dc000 - 000000007c6df000
[ 0.000000] PM: Registered nosave memory: 000000007c6df000 - 000000007c706000
[ 0.000000] PM: Registered nosave memory: 000000007c706000 - 000000007c708000
[ 0.000000] PM: Registered nosave memory: 000000007c708000 - 000000007c90f000
[ 0.000000] PM: Registered nosave memory: 000000007c90f000 - 000000007c99f000
[ 0.000000] PM: Registered nosave memory: 000000007c99f000 - 000000007c9ff000
[ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007c200000 s81408 r8192 d20992 u524288
[ 0.000000] pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 502445
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1972936k/2041856k available (5512k kernel code, 4072k absent, 64848k reserved, 5408k data, 1364k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] kmemleak: Early log buffer exceeded (547), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1861.860 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.72 BogoMIPS (lpj=7447440)
[ 0.004154] pid_max: default: 32768 minimum: 301
[ 0.008178] Security Framework initialized
[ 0.008561] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009850] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010482] Mount-cache hash table entries: 256
[ 0.011234] Initializing cgroup subsys cpuacct
[ 0.011311] Initializing cgroup subsys devices
[ 0.011386] Initializing cgroup subsys freezer
[ 0.011462] Initializing cgroup subsys net_cls
[ 0.011538] Initializing cgroup subsys blkio
[ 0.011613] Initializing cgroup subsys perf_event
[ 0.011792] Disabled fast string operations
[ 0.011872] CPU: Physical Processor ID: 0
[ 0.011947] CPU: Processor Core ID: 0
[ 0.012006] mce: CPU supports 6 MCE banks
[ 0.012089] CPU0: Thermal monitoring enabled (TM2)
[ 0.012171] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.012171] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.012171] tlb_flushall_shift: -1
[ 0.012368] Freeing SMP alternatives: 20k freed
[ 0.013362] ACPI: Core revision 20130117
[ 0.028912] ACPI: All ACPI Tables successfully acquired
[ 0.032598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072731] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (fam: 06, model: 17, stepping: 06)
[ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076000] ... version: 2
[ 0.076000] ... bit width: 40
[ 0.076000] ... generic registers: 2
[ 0.076000] ... value mask: 000000ffffffffff
[ 0.076000] ... max period: 000000007fffffff
[ 0.076000] ... fixed-purpose events: 3
[ 0.076000] ... event mask: 0000000700000003
[ 0.008000] Disabled fast string operations
[ 0.076000] smpboot: Booting Node 0, Processors #1
[ 0.088030] Brought up 2 CPUs
[ 0.088251] smpboot: Total of 2 processors activated (7447.44 BogoMIPS)
[ 0.092773] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.093069] devtmpfs: initialized
[ 0.098804] PM: Registering ACPI NVS region [mem 0x7c6c6000-0x7c6d0fff] (45056 bytes)
[ 0.098804] PM: Registering ACPI NVS region [mem 0x7c6d8000-0x7c6dbfff] (16384 bytes)
[ 0.098804] PM: Registering ACPI NVS region [mem 0x7c6df000-0x7c705fff] (159744 bytes)
[ 0.098804] PM: Registering ACPI NVS region [mem 0x7c90f000-0x7c99efff] (589824 bytes)
[ 0.098804] regulator-dummy: no parameters
[ 0.098804] RTC time: 21:22:18, date: 03/13/13
[ 0.100100] NET: Registered protocol family 16
[ 0.100609] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.100716] ACPI: bus type PCI registered
[ 0.100897] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.101007] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.111009] PCI: Using configuration type 1 for base access
[ 0.113590] bio: create slab <bio-0> at 0
[ 0.113590] ACPI: Added _OSI(Module Device)
[ 0.113590] ACPI: Added _OSI(Processor Device)
[ 0.113590] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113590] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.117277] ACPI: EC: EC description table is found, configuring boot EC
[ 0.131147] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.142007] ACPI: SSDT 000000007c6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.142900] ACPI: Dynamic OEM Table Load:
[ 0.143058] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.143582] ACPI: SSDT 000000007c6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.144872] ACPI: Dynamic OEM Table Load:
[ 0.145030] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.145242] ACPI: SSDT 000000007c6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.145639] ACPI: Dynamic OEM Table Load:
[ 0.145797] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.148176] ACPI: SSDT 000000007c6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.149058] ACPI: Dynamic OEM Table Load:
[ 0.149216] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.152363] ACPI: Interpreter enabled
[ 0.152445] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.152640] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.152850] ACPI: (supports S0 S3 S4 S5)
[ 0.152925] ACPI: Using IOAPIC for interrupt routing
[ 0.153065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.184061] ACPI: Power Resource [PUBS] (on)
[ 0.193601] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.196183] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.196977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.197771] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.198564] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.199358] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.200157] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.200950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.201550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.202635] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.203662] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.203801] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.203990] PCI host bridge to bus 0000:00
[ 0.204005] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.204083] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.204161] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.204240] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.204319] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.204398] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.204477] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfebfffff]
[ 0.204574] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.204769] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.204784] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.204793] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.204801] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.204930] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.204943] pci 0000:00:02.1: reg 10: [mem 0xf2400000-0xf24fffff 64bit]
[ 0.205147] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
[ 0.205167] pci 0000:00:03.0: reg 10: [mem 0xf2826800-0xf282680f 64bit]
[ 0.205226] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.205401] pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185
[ 0.205418] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f]
[ 0.205426] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f]
[ 0.205435] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827]
[ 0.205443] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b]
[ 0.205451] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f]
[ 0.205652] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002
[ 0.205668] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837]
[ 0.205677] pci 0000:00:03.3: reg 14: [mem 0xf2624000-0xf2624fff]
[ 0.205944] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.205972] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff]
[ 0.205985] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff]
[ 0.205998] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.206095] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.206149] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.206320] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.206382] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.206548] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.206722] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.206784] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.206992] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.207054] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
[ 0.207226] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.207410] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.207439] pci 0000:00:1a.7: reg 10: [mem 0xf2826c00-0xf2826fff]
[ 0.207560] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.207667] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.207844] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.207868] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.208046] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.208168] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.208347] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.208459] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.208521] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.208693] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.208805] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.208869] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.209094] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.209204] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.209280] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.209456] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.209518] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
[ 0.209674] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.209846] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.209907] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
[ 0.210103] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.210165] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.210376] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.210405] pci 0000:00:1d.7: reg 10: [mem 0xf2827000-0xf28273ff]
[ 0.210526] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.210628] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.210797] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.211039] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.211300] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.211332] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
[ 0.211344] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
[ 0.211357] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
[ 0.211369] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
[ 0.211382] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.211395] pci 0000:00:1f.2: reg 24: [mem 0xf2826000-0xf28267ff]
[ 0.211471] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.211622] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.211647] pci 0000:00:1f.3: reg 10: [mem 0xf2827400-0xf28274ff 64bit]
[ 0.211679] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.211943] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.212217] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000
[ 0.212286] pci 0000:03:00.0: reg 10: [mem 0xf2500000-0xf2501fff 64bit]
[ 0.212526] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.220047] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.220130] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.220250] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.220330] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.220336] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.220345] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.220490] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 0.220581] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.220584] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.220587] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.220590] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.220593] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.220596] pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xfebfffff] (subtractive decode)
[ 0.225009] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.225185] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.225250] Found 1 acpi root devices
[ 0.225398] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.228956] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.229110] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.229110] vgaarb: loaded
[ 0.229110] vgaarb: bridge control possible 0000:00:02.0
[ 0.229110] SCSI subsystem initialized
[ 0.229110] ACPI: bus type ATA registered
[ 0.229110] libata version 3.00 loaded.
[ 0.229110] PCI: Using ACPI for IRQ routing
[ 0.232836] PCI: pci_cache_line_size set to 64 bytes
[ 0.232922] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.232925] e820: reserve RAM buffer [mem 0x7c4a1000-0x7fffffff]
[ 0.232932] e820: reserve RAM buffer [mem 0x7c5b7000-0x7fffffff]
[ 0.232936] e820: reserve RAM buffer [mem 0x7c6c6000-0x7fffffff]
[ 0.232939] e820: reserve RAM buffer [mem 0x7ca00000-0x7fffffff]
[ 0.233266] NetLabel: Initializing
[ 0.233340] NetLabel: domain hash size = 128
[ 0.233415] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.233552] NetLabel: unlabeled traffic allowed by default
[ 0.233645] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.233728] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.234012] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.236036] Switching to clocksource hpet
[ 0.245684] pnp: PnP ACPI init
[ 0.245779] ACPI: bus type PNP registered
[ 0.267601] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.267683] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.267764] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.267843] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.267922] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.268013] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.268093] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.268173] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.268253] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.268333] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.268413] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.268493] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.268573] system 00:00: [mem 0x00100000-0x7effffff] could not be reserved
[ 0.268653] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.268734] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.268815] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.289395] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.289475] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.289556] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.289635] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.289713] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.289792] system 00:01: [io 0x1600-0x1641] has been reserved
[ 0.289870] system 00:01: [io 0x1600-0x161b] has been reserved
[ 0.289950] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.290029] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.290109] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.290188] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.290268] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.290348] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.290428] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.290571] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.290599] pnp 00:03: [dma 4]
[ 0.290652] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.290721] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.290803] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.290880] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.290958] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.291036] pnp 00:08: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.311539] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.312276] pnp: PnP ACPI: found 10 devices
[ 0.312352] ACPI: bus type PNP unregistered
[ 0.322353] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.322359] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.322363] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.322376] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.322380] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.322413] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.322416] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.322419] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.322422] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.322425] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.322431] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f000000-0x7f1fffff]
[ 0.322512] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.322621] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f400000-0x7f5fffff 64bit pref]
[ 0.322730] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.322809] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.322890] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.322968] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.323050] pci 0000:00:1c.0: bridge window [mem 0x7f000000-0x7f1fffff]
[ 0.323132] pci 0000:00:1c.0: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.323245] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.323323] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.323404] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.323486] pci 0000:00:1c.1: bridge window [mem 0x7f400000-0x7f5fffff 64bit pref]
[ 0.323598] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.323675] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.323757] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.323839] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.323951] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 0.324388] pci 0000:00:1e.0: setting latency timer to 64
[ 0.324394] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.324396] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.324399] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.324402] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.324404] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.324407] pci_bus 0000:00: resource 9 [mem 0x7f000000-0xfebfffff]
[ 0.324410] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.324413] pci_bus 0000:02: resource 1 [mem 0x7f000000-0x7f1fffff]
[ 0.324415] pci_bus 0000:02: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.324418] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.324421] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.324424] pci_bus 0000:03: resource 2 [mem 0x7f400000-0x7f5fffff 64bit pref]
[ 0.324426] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.324429] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.324432] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.324435] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 0.324437] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 0.324440] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.324443] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.324445] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.324448] pci_bus 0000:0d: resource 9 [mem 0x7f000000-0xfebfffff]
[ 0.324592] NET: Registered protocol family 2
[ 0.325583] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.325846] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.326103] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.326543] TCP: reno registered
[ 0.326634] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.326757] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.327072] NET: Registered protocol family 1
[ 0.327168] pci 0000:00:02.0: Boot video device
[ 0.327190] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.327691] pci 0000:00:1a.2: power state changed by ACPI to D0
[ 0.328226] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.329188] PCI: CLS 64 bytes, default 64
[ 0.329452] Unpacking initramfs...
[ 0.879385] Freeing initrd memory: 21316k freed
[ 0.891050] Simple Boot Flag at 0x35 set to 0x1
[ 0.891616] Scanning for low memory corruption every 60 seconds
[ 0.892214] audit: initializing netlink socket (disabled)
[ 0.892316] type=2000 audit(1363209738.892:1): initialized
[ 0.925495] bounce pool size: 64 pages
[ 0.925584] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.926354] VFS: Disk quotas dquot_6.5.2
[ 0.926481] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.927302] msgmni has been set to 3895
[ 0.928040] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.928205] io scheduler noop registered
[ 0.928291] io scheduler deadline registered
[ 0.928406] io scheduler cfq registered (default)
[ 0.929750] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.930004] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.930256] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.930547] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.930631] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.930699] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.930779] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.930860] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.930928] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.931012] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.931257] intel_idle: does not run on family 6 model 23
[ 0.931318] GHES: HEST is not enabled!
[ 0.931481] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 0.955377] 0000:00:03.3: ttyS4 at I/O 0x1830 (irq = 17) is a 16550A
[ 0.955837] Non-volatile memory driver v1.3
[ 0.955913] Linux agpgart interface v0.103
[ 0.956139] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.956335] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.958785] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.959035] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.959357] ahci 0000:00:1f.2: version 3.0
[ 0.959590] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.959791] ahci: SSS flag set, parallel bus scan disabled
[ 0.959895] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.960022] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 0.960146] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.961168] scsi0 : ahci
[ 0.961468] scsi1 : ahci
[ 0.961708] scsi2 : ahci
[ 0.961949] scsi3 : ahci
[ 0.962131] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 43
[ 0.962241] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 43
[ 0.962348] ata3: DUMMY
[ 0.962420] ata4: DUMMY
[ 0.962683] libphy: Fixed MDIO Bus: probed
[ 0.962761] PPP generic driver version 2.4.2
[ 0.963025] PPP BSD Compression module registered
[ 0.963102] PPP Deflate Compression module registered
[ 0.963181] PPP MPPE Compression module registered
[ 0.963258] NET: Registered protocol family 24
[ 0.963430] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.974285] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.974368] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.974728] mousedev: PS/2 mouse device common for all mice
[ 0.974959] rtc_cmos 00:06: RTC can wake from S4
[ 0.975302] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.975420] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.975547] cpuidle: using governor ladder
[ 0.975622] cpuidle: using governor menu
[ 0.975697] EFI Variables Facility v0.08 2004-May-17
[ 0.975823] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.976041] TCP: cubic registered
[ 0.976224] NET: Registered protocol family 10
[ 0.977243] PM: Checking hibernation image partition /dev/sda1
[ 0.980750] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.280033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.280578] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.280582] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.280690] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.281019] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133
[ 1.281099] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.281662] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.281667] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.281775] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.282104] ata1.00: configured for UDMA/133
[ 1.282448] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 1.282892] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.283214] sd 0:0:0:0: [sda] Write Protect is off
[ 1.283293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.283352] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.284291] sda: sda1 sda2
[ 1.284944] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.444397] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 1.600029] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.777004] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1.794398] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1
[ 1.798483] PM: Hibernation image partition 8:1 present
[ 1.798486] PM: Looking for hibernation image.
[ 1.798711] PM: Image not found (code -22)
[ 1.798713] PM: Hibernation image not present or could not be loaded.
[ 1.798749] registered taskstats version 1
[ 1.799514] Magic number: 5:10:399
[ 1.801181] Freeing unused kernel memory: 1364k freed
[ 1.801647] Write protecting the kernel read-only data: 10240k
[ 1.803674] Freeing unused kernel memory: 620k freed
[ 1.808877] Freeing unused kernel memory: 1620k freed
[ 1.851024] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.851106] ACPI: Thermal Zone [THM0] (53 C)
[ 1.853562] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.853641] ACPI: Thermal Zone [THM1] (52 C)
[ 1.856461] ata_generic 0000:00:03.2: setting latency timer to 64
[ 1.857117] scsi4 : ata_generic
[ 1.857361] scsi5 : ata_generic
[ 1.857530] ata5: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18
[ 1.857611] ata6: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18
[ 1.888021] tsc: Refined TSC clocksource calibration: 1861.999 MHz
[ 1.888102] Switching to clocksource tsc
[ 2.192337] ACPI: Requesting acpi_cpufreq
[ 2.195404] Monitor-Mwait will be used to enter C-1 state
[ 2.195417] Monitor-Mwait will be used to enter C-2 state
[ 2.195426] Monitor-Mwait will be used to enter C-3 state
[ 2.195433] tsc: Marking TSC unstable due to TSC halts in idle
[ 2.195527] ACPI: acpi_idle registered with cpuidle
[ 2.196760] Switching to clocksource hpet
[ 2.252779] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 2.260440] udevd[99]: starting version 173
[ 2.299501] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 2.322120] ACPI: bus type USB registered
[ 2.322276] usbcore: registered new interface driver usbfs
[ 2.322384] usbcore: registered new interface driver hub
[ 2.327724] ACPI: Lid Switch [LID]
[ 2.327963] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 2.330234] ACPI: Sleep Button [SLPB]
[ 2.330437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.330918] ACPI: Power Button [PWRF]
[ 2.346946] [drm] Initialized drm 1.1.0 20060810
[ 2.361651] usbcore: registered new device driver usb
[ 2.413189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.419227] [drm] Memory usable by graphics device = 2048M
[ 2.419316] i915 0000:00:02.0: setting latency timer to 64
[ 2.420937] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.490517] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.490538] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.490626] [drm] Driver supports precise vblank timestamp query.
[ 2.490841] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.702183] fbcon: inteldrmfb (fb0) is primary device
[ 3.231763] Console: switching to colour frame buffer device 180x56
[ 3.235328] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.235358] i915 0000:00:02.0: registered panic notifier
[ 3.240880] acpi device:01: registered as cooling_device2
[ 3.241074] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.241221] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.241448] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.241714] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.241719] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.241762] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.241896] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 3.242024] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.242062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.242103] usb usb1: Product: UHCI Host Controller
[ 3.242131] usb usb1: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.242170] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.242585] hub 1-0:1.0: USB hub found
[ 3.242619] hub 1-0:1.0: 2 ports detected
[ 3.242945] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.242950] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.242992] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.243121] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 3.243237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.243276] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.243317] usb usb2: Product: UHCI Host Controller
[ 3.243346] usb usb2: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.243385] usb usb2: SerialNumber: 0000:00:1a.1
[ 3.243896] hub 2-0:1.0: USB hub found
[ 3.243928] hub 2-0:1.0: 2 ports detected
[ 3.244876] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.244882] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.244922] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 3.245048] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 3.245162] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.246688] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.248208] usb usb3: Product: UHCI Host Controller
[ 3.249728] usb usb3: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.251251] usb usb3: SerialNumber: 0000:00:1a.2
[ 3.255188] hub 3-0:1.0: USB hub found
[ 3.256724] hub 3-0:1.0: 2 ports detected
[ 3.258529] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.258534] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.260037] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.261634] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 3.263147] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.264541] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.266029] usb usb4: Product: UHCI Host Controller
[ 3.267401] usb usb4: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.268835] usb usb4: SerialNumber: 0000:00:1d.0
[ 3.270547] hub 4-0:1.0: USB hub found
[ 3.272045] hub 4-0:1.0: 2 ports detected
[ 3.274004] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.274012] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.275473] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.277009] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 3.278557] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.280015] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.281433] usb usb5: Product: UHCI Host Controller
[ 3.282738] usb usb5: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.284098] usb usb5: SerialNumber: 0000:00:1d.1
[ 3.285688] hub 5-0:1.0: USB hub found
[ 3.287089] hub 5-0:1.0: 2 ports detected
[ 3.288815] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.288821] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.290235] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.291683] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 3.293123] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.294397] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.295677] usb usb6: Product: UHCI Host Controller
[ 3.296982] usb usb6: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.298277] usb usb6: SerialNumber: 0000:00:1d.2
[ 3.299819] hub 6-0:1.0: USB hub found
[ 3.301200] hub 6-0:1.0: 2 ports detected
[ 3.462805] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 3.462814] PM: Marking nosave pages: [mem 0x7c4a1000-0x7c4a6fff]
[ 3.462817] PM: Marking nosave pages: [mem 0x7c5b7000-0x7c60efff]
[ 3.462821] PM: Marking nosave pages: [mem 0x7c6c6000-0x7c9fefff]
[ 3.462850] PM: Basic memory bitmaps created
[ 3.474989] PM: Basic memory bitmaps freed
[ 3.474997] video LNXVIDEO:00: Restoring backlight state
[ 3.495558] PM: Starting manual resume from disk
[ 3.496953] PM: Hibernation image partition 8:1 present
[ 3.496956] PM: Looking for hibernation image.
[ 3.497187] PM: Image not found (code -22)
[ 3.497189] PM: Hibernation image not present or could not be loaded.
[ 3.545910] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.556055] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 3.567188] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 3.727237] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810
[ 3.728695] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.730235] usb 2-1: Product: Fingerprint Sensor
[ 3.844047] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ 4.010237] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 4.011838] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.013326] usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 4.014906] usb 2-2: Manufacturer: Lenovo Computer Corp
[ 4.109393] systemd-readahead-replay[388]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186
[ 4.116850] Call Trace:
[ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0
[ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240
[ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230
[ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70
[ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100
[ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150
[ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80
[ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0
[ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d
[ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0
[ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560
[ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630
[ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130
[ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630
[ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0
[ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40
[ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120
[ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90
[ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360
[ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10
[ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0
[ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30
[ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220
[ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70
[ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0
[ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0
[ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280
[ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110
[ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0
[ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130
[ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0
[ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b
[ 4.116943] handlers:
[ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore]
[ 4.116960] Disabling IRQ #16
[ 4.215596] udevd[406]: starting version 173
[ 4.261438] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 4.474227] pps_core: LinuxPPS API ver. 1 registered
[ 4.475247] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.490149] PTP clock support registered
[ 4.496173] ehci-pci: EHCI PCI platform driver
[ 4.497504] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 4.497510] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 4.498644] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 4.499788] ehci-pci 0000:00:1a.7: debug port 1
[ 4.504820] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 4.504885] ehci-pci 0000:00:1a.7: irq 23, io mem 0xf2826c00
[ 4.516548] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.517755] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.518917] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.520113] usb usb7: Product: EHCI Host Controller
[ 4.521238] usb usb7: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb ehci_hcd
[ 4.522365] usb usb7: SerialNumber: 0000:00:1a.7
[ 4.528236] hub 7-0:1.0: USB hub found
[ 4.529464] hub 7-0:1.0: 6 ports detected
[ 4.531174] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 4.531180] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.532348] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 4.533549] ehci-pci 0000:00:1d.7: debug port 1
[ 4.538661] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 4.538735] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf2827000
[ 4.560515] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.561757] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.563083] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.564334] usb usb8: Product: EHCI Host Controller
[ 4.565569] usb usb8: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb ehci_hcd
[ 4.566902] usb usb8: SerialNumber: 0000:00:1d.7
[ 4.591515] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k
[ 4.592796] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 4.607818] mtp-probe[567]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1"
[ 4.610109] hub 8-0:1.0: USB hub found
[ 4.611543] hub 8-0:1.0: 6 ports detected
[ 4.613534] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.616308] usb 2-1: USB disconnect, device number 2
[ 4.616324] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130117/utaddress-251)
[ 4.616325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.616331] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130117/utaddress-251)
[ 4.616332] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.616336] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130117/utaddress-251)
[ 4.616337] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.616338] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.628318] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.628457] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.630368] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4.640424] wmi: Mapper loaded
[ 4.653195] cfg80211: Calling CRDA to update world regulatory domain
[ 4.701896] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 4.703611] Copyright(c) 2003-2013 Intel Corporation
[ 4.705632] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[ 4.725360] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
[ 4.740229] tpm_tis 00:09: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 4.741976] tpm_tis 00:09: Intel iTPM workaround enabled
[ 4.768109] usb 2-2: USB disconnect, device number 3
[ 4.792120] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 4.793905] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.795579] thinkpad_acpi: ThinkPad BIOS 6DET38WW (2.02 ), EC 7XHT21WW-1.03
[ 4.797294] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470BN2
[ 4.824561] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 4.843449] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.845290] ACPI: Battery Slot [BAT0] (battery present)
[ 4.848542] thinkpad_acpi: radio switch found; radios are enabled
[ 4.850429] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.852271] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.856794] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[ 4.858655] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[ 4.864668] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.866807] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:15:7a:65
[ 4.868727] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.868823] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 4.872503] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 4.874760] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4.881757] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 4.897078] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.897236] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.901050] ACPI: AC Adapter [AC] (on-line)
[ 4.903316] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.908532] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 4.914432] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 4.917701] ALSA sound/pci/hda/hda_auto_parser.c:335 autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 4.917705] ALSA sound/pci/hda/hda_auto_parser.c:339 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.917708] ALSA sound/pci/hda/hda_auto_parser.c:343 hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 4.917710] ALSA sound/pci/hda/hda_auto_parser.c:344 mono: mono_out=0x0
[ 4.917712] ALSA sound/pci/hda/hda_auto_parser.c:347 dig-out=0x1c/0x0
[ 4.917714] ALSA sound/pci/hda/hda_auto_parser.c:348 inputs:
[ 4.917717] ALSA sound/pci/hda/hda_auto_parser.c:352 Mic=0x18
[ 4.917720] ALSA sound/pci/hda/hda_auto_parser.c:352 Internal Mic=0x1d
[ 4.917723] ALSA sound/pci/hda/hda_auto_parser.c:352 Dock Mic=0x17
[ 4.919349] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 4.921864] ALSA sound/pci/hda/patch_conexant.c:3402 hda_codec: Enable sync_write for stable communication
[ 4.929866] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.932516] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.935484] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.944714] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 4.954054] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.995577] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 4.997718] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 4.999837] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 5.001920] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 5.004073] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[ 5.006064] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 5.008180] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 5.034023] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.043797] Bluetooth: Core ver 2.16
[ 5.045964] NET: Registered protocol family 31
[ 5.047935] Bluetooth: HCI device and connection manager initialized
[ 5.049968] Bluetooth: HCI socket layer initialized
[ 5.050711] ifup-sysctl[680]: ifup-sysctl lo -o hotplug
[ 5.053878] Bluetooth: L2CAP socket layer initialized
[ 5.054021] ifup-sysctl[682]: Applying lo ifsysctl settings
[ 5.057656] Bluetooth: SCO socket layer initialized
[ 5.070490] usbcore: registered new interface driver btusb
[ 5.123448] iTCO_vendor_support: vendor-support=0
[ 5.125321] udev-configure-printer[707]: add /module/lpc_ich
[ 5.126693] udev-configure-printer[707]: Failed to get parent
[ 5.137293] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.139145] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[ 5.163912] udev-configure-printer[713]: add /bus/pci/drivers/lpc_ich
[ 5.165632] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.174627] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 5.177807] udev-configure-printer[713]: Failed to get parent
[ 5.196277] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.200858] cfg80211: World regulatory domain updated:
[ 5.202655] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.204496] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.206268] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.208081] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.209869] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.211630] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.270774] ifup-sysctl[769]: ifup-sysctl eth0 -o hotplug
[ 5.284933] ifup-sysctl[774]: Applying eth0 ifsysctl settings
[ 5.298959] ifup-sysctl[781]: ifup-sysctl wlan0 -o hotplug
[ 5.306005] ifup-sysctl[790]: Applying wlan0 ifsysctl settings
[ 5.320782] Adding 2104476k swap on /dev/sda1. Priority:0 extents:1 across:2104476k SS
[ 5.349997] ifup[804]: eth0 -o hotplug
[ 5.353701] ifup[806]: wlan0 -o hotplug
[ 5.367297] ifup[819]: Service network not started and mode 'auto' -> skipping
[ 5.372326] ifup[822]: Service network not started and mode 'auto' -> skipping
[ 5.448815] mtp-probe[567]: bus: 2, device: 2 was not an MTP device
[ 5.688096] usb 2-1: new full-speed USB device number 4 using uhci_hcd
[ 5.860182] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810
[ 5.863703] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.867154] usb 2-1: Product: Fingerprint Sensor
[ 6.112176] usb 2-2: new full-speed USB device number 5 using uhci_hcd
[ 6.283209] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 6.286596] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.289957] usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 6.293306] usb 2-2: Manufacturer: Lenovo Computer Corp
[ 6.320349] WARNING! power/level is deprecated; use power/control instead
[ 6.328524] udevd[473]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/power/level} for writing: No such file or directory
[ 6.345180] udevd[473]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/power/level} for writing: No such file or directory
[ 6.352936] mtp-probe[844]: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1"
[ 6.617416] mtp-probe[844]: bus: 2, device: 4 was not an MTP device
[ 6.629292] udevd[472]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/power/level} for writing: No such file or directory
[ 6.688416] device-mapper: uevent: version 1.0.3
[ 6.690521] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 6.866842] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.917311] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.988914] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.063415] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 7.064009] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
[ 7.073836] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 7.076145] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
[ 7.107750] tun: Universal TUN/TAP device driver, 1.6
[ 7.109121] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 7.953095] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 7.954658] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 8.139040] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 8.140580] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 8.261431] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.542102] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.644203] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.644531] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.603442] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.603443] Bluetooth: BNEP filters: protocol multicast
[ 11.603461] Bluetooth: BNEP socket layer initialized
[ 11.635882] nscd[2066]: segfault at 1 ip 0000000000000001 sp 00007fff61239748 error 14 in libnss_files-2.16.90.so[7f276d32f000+c000]
[ 11.722837] Bluetooth: RFCOMM TTY layer initialized
[ 11.724558] Bluetooth: RFCOMM socket layer initialized
[ 11.726316] Bluetooth: RFCOMM ver 1.11
[ 12.550291] cgroup: libvirtd (2192) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 12.550488] cgroup: libvirtd (2192) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 16.742018] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 16.742405] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 16.865807] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.109843] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 17.212291] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 17.212588] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.263489] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 17.263893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 17.389326] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.473551] NET: Registered protocol family 17
[ 22.532708] wlan0: authenticate with 00:b0:0c:4e:a5:28
[ 22.536209] wlan0: send auth to 00:b0:0c:4e:a5:28 (try 1/3)
[ 22.538826] wlan0: authenticated
[ 22.538910] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 22.540060] wlan0: associate with 00:b0:0c:4e:a5:28 (try 1/3)
[ 22.542792] wlan0: RX AssocResp from 00:b0:0c:4e:a5:28 (capab=0x411 status=0 aid=4)
[ 22.544327] wlan0: associated
[ 22.544540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.544750] cfg80211: Calling CRDA for country: CN
[ 22.558781] cfg80211: Regulatory domain changed to country: CN
[ 22.558785] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.558788] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 22.558790] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 29.241240] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0
[-- Attachment #3: Type: TEXT/plain, Size: 1999 bytes --]
CPU0 CPU1
0: 14829 21007 IO-APIC-edge timer
1: 2264 19 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc0
9: 1197 999 IO-APIC-fasteoi acpi
12: 1945 2186 IO-APIC-edge i8042
16: 50247 49754 IO-APIC-fasteoi uhci_hcd:usb4
17: 1 1 IO-APIC-fasteoi uhci_hcd:usb5
18: 0 0 IO-APIC-fasteoi ata_generic, uhci_hcd:usb6
19: 0 0 IO-APIC-fasteoi ehci_hcd:usb8
20: 0 0 IO-APIC-fasteoi uhci_hcd:usb1
21: 164 146 IO-APIC-fasteoi uhci_hcd:usb2
22: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
23: 1 2 IO-APIC-fasteoi ehci_hcd:usb7, i801_smbus
40: 0 0 PCI-MSI-edge PCIe PME
41: 0 0 PCI-MSI-edge PCIe PME
42: 0 0 PCI-MSI-edge PCIe PME
43: 8130 6874 PCI-MSI-edge ahci
44: 956 47 PCI-MSI-edge i915
45: 236 9 PCI-MSI-edge eth0
46: 18637 630 PCI-MSI-edge iwlwifi
47: 76 76 PCI-MSI-edge snd_hda_intel
NMI: 15 14 Non-maskable interrupts
LOC: 22437 15298 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 15 14 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 4740 3751 Rescheduling interrupts
CAL: 2632 9194 Function call interrupts
TLB: 246 204 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 2 2 Machine check polls
ERR: 0
MIS: 0
[-- Attachment #4: Type: TEXT/plain, Size: 27391 bytes --]
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 20e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4142
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) (prog-if 85 [Master SecO PriO])
Subsystem: Lenovo Device 20ea
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 1828 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1820 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 1810 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: ata_generic
Kernel modules: ata_generic
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) (prog-if 02 [16550])
Subsystem: Lenovo Device 20ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1830 [size=8]
Region 1: Memory at f2624000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41b2
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18a0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 47
Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4172
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 7f000000-7f1fffff
Prefetchable memory behind bridge: 000000007f200000-000000007f3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41c1
Capabilities: [90] Subsystem: Lenovo Device 20f3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f2500000-f25fffff
Prefetchable memory behind bridge: 000000007f400000-000000007f5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41d1
Capabilities: [90] Subsystem: Lenovo Device 20f3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41e1
Capabilities: [90] Subsystem: Lenovo Device 20f3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=04 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18c0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18e0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1c00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Lenovo Device 20f4
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device 20f8
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 1c48 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1c40 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee0100c Data: 4122
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
Subsystem: Intel Corporation WiFi Link 5100 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4162
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-22-fa-ff-ff-34-b0-4c
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
next prev parent reply other threads:[~2013-03-13 21:35 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 19:12 [3.9-rc1] very poor interrupt responses Shawn Starr
2013-03-08 21:33 ` [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Peter Hurley
2013-03-09 2:19 ` Alan Stern
2013-03-09 8:53 ` Thomas Meyer
2013-03-09 13:07 ` Peter Hurley
2013-03-13 21:35 ` Jiri Kosina [this message]
2013-03-14 14:51 ` Alan Stern
2013-03-14 14:51 ` Alan Stern
2013-03-14 14:56 ` Jiri Kosina
2013-03-14 15:18 ` Alan Stern
2013-03-14 15:18 ` Alan Stern
2013-03-14 15:39 ` Jiri Kosina
2013-03-14 15:47 ` Jiri Kosina
2013-03-14 16:10 ` Alan Stern
2013-03-14 16:10 ` Alan Stern
2013-03-14 16:13 ` Alan Stern
2013-03-14 16:13 ` Alan Stern
2013-03-14 16:09 ` Jiri Kosina
2013-03-14 16:42 ` Peter Hurley
2013-03-14 16:46 ` Rafael J. Wysocki
2013-03-14 17:06 ` Peter Hurley
2013-03-14 17:22 ` Rafael J. Wysocki
2013-03-14 17:26 ` Peter Hurley
2013-03-15 7:59 ` Jiri Kosina
2013-03-15 9:20 ` Harald Arnesen
2013-03-15 13:33 ` Jiri Kosina
2013-03-15 13:33 ` Jiri Kosina
2013-03-15 15:14 ` Jiri Kosina
2013-03-15 19:14 ` Yinghai Lu
2013-03-18 2:41 ` Shawn Starr
2013-03-18 9:12 ` Jiri Kosina
2013-03-18 18:57 ` Yinghai Lu
2013-03-18 22:05 ` Jiri Kosina
2013-03-18 22:50 ` Yinghai Lu
[not found] ` <alpine.LNX.2.00.1303181010080.9529-ztGlSCb7Y1iN3ZZ/Hiejyg@public.gmane.org>
2013-03-18 19:19 ` Daniel Vetter
2013-03-18 19:19 ` Daniel Vetter
2013-03-18 19:57 ` Chris Wilson
2013-03-18 22:04 ` Jiri Kosina
2013-03-15 15:32 ` Greg KH
2013-03-15 15:37 ` Jiri Kosina
2013-03-15 15:47 ` Greg KH
2013-03-15 16:21 ` Jiri Kosina
2013-03-18 8:21 ` Daniel Vetter
2013-03-18 15:56 ` [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) Jiri Kosina
2013-03-18 17:04 ` Chris Wilson
2013-03-19 8:56 ` Jiri Kosina
2013-03-19 9:03 ` Chris Wilson
2013-03-18 19:21 ` Daniel Vetter
2013-03-18 11:13 ` [PATCH] drm/i915: Flush writes to GMBUS registers Chris Wilson
2013-03-18 11:51 ` Jiri Kosina
2013-03-18 12:48 ` Chris Wilson
2013-03-14 18:48 ` [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Yinghai Lu
2013-03-11 3:38 ` [3.9-rc1] very poor interrupt responses Rafael J. Wysocki
2013-03-11 10:09 ` Harald Arnesen
2013-03-11 14:55 ` Rafael J. Wysocki
2013-03-18 7:14 [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Thomas Meyer
2013-03-18 7:14 ` Thomas Meyer
2013-03-18 7:14 ` Thomas Meyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LRH.2.00.1303132233080.27467@twin.jikos.cz \
--to=jkosina@suse.cz \
--cc=bhelgaas@google.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter@hurleysoftware.com \
--cc=rjw@sisk.pl \
--cc=shawn.starr@rogers.com \
--cc=stern@rowland.harvard.edu \
--cc=thomas@m3y3r.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.