From: Huang Shijie <b32955@freescale.com> To: <dwmw2@infradead.org> Cc: Huang Shijie <b32955@freescale.com>, linux-mtd@lists.infradead.org, linux-arm-kernel@lists.infradead.org, dedekind1@gmail.com Subject: [PATCH 1/4] mtd: gpmi: decouple the chip select from the DMA channel Date: Fri, 14 Jun 2013 16:06:22 +0800 [thread overview] Message-ID: <1371197185-27491-2-git-send-email-b32955@freescale.com> (raw) In-Reply-To: <1371197185-27491-1-git-send-email-b32955@freescale.com> Decouple the chip select from the DMA channel, we use the DMA channel 0 to accecc all the nand devices. Signed-off-by: Huang Shijie <b32955@freescale.com> --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 6 ++++++ drivers/mtd/nand/gpmi-nand/gpmi-regs.h | 3 +++ 2 files changed, 9 insertions(+), 0 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 4f8857f..7d56d87 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -187,6 +187,12 @@ int gpmi_init(struct gpmi_nand_data *this) /* Select BCH ECC. */ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET); + /* + * Decouple the chip select from dma channel. We use dma0 for all + * the chips. + */ + writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET); + gpmi_disable_clk(this); return 0; err_out: diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h index 53397cc..82114cd 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h @@ -108,6 +108,9 @@ #define HW_GPMI_CTRL1_CLR 0x00000068 #define HW_GPMI_CTRL1_TOG 0x0000006c +#define BP_GPMI_CTRL1_DECOUPLE_CS 24 +#define BM_GPMI_CTRL1_DECOUPLE_CS (1 << BP_GPMI_CTRL1_DECOUPLE_CS) + #define BP_GPMI_CTRL1_WRN_DLY_SEL 22 #define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL) #define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \ -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: b32955@freescale.com (Huang Shijie) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/4] mtd: gpmi: decouple the chip select from the DMA channel Date: Fri, 14 Jun 2013 16:06:22 +0800 [thread overview] Message-ID: <1371197185-27491-2-git-send-email-b32955@freescale.com> (raw) In-Reply-To: <1371197185-27491-1-git-send-email-b32955@freescale.com> Decouple the chip select from the DMA channel, we use the DMA channel 0 to accecc all the nand devices. Signed-off-by: Huang Shijie <b32955@freescale.com> --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 6 ++++++ drivers/mtd/nand/gpmi-nand/gpmi-regs.h | 3 +++ 2 files changed, 9 insertions(+), 0 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 4f8857f..7d56d87 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -187,6 +187,12 @@ int gpmi_init(struct gpmi_nand_data *this) /* Select BCH ECC. */ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET); + /* + * Decouple the chip select from dma channel. We use dma0 for all + * the chips. + */ + writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET); + gpmi_disable_clk(this); return 0; err_out: diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h index 53397cc..82114cd 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h @@ -108,6 +108,9 @@ #define HW_GPMI_CTRL1_CLR 0x00000068 #define HW_GPMI_CTRL1_TOG 0x0000006c +#define BP_GPMI_CTRL1_DECOUPLE_CS 24 +#define BM_GPMI_CTRL1_DECOUPLE_CS (1 << BP_GPMI_CTRL1_DECOUPLE_CS) + #define BP_GPMI_CTRL1_WRN_DLY_SEL 22 #define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL) #define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \ -- 1.7.1
next prev parent reply other threads:[~2013-06-14 8:06 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-06-14 8:06 [PATCH 0/4] mtd: gpmi: support two nand chips at most Huang Shijie 2013-06-14 8:06 ` Huang Shijie 2013-06-14 8:06 ` Huang Shijie [this message] 2013-06-14 8:06 ` [PATCH 1/4] mtd: gpmi: decouple the chip select from the DMA channel Huang Shijie 2013-06-14 8:06 ` [PATCH 2/4] mtd: gpmi: use DMA channel 0 for all the nand chips Huang Shijie 2013-06-14 8:06 ` Huang Shijie 2013-06-14 8:06 ` [PATCH 3/4] mtd: gpmi: scan two " Huang Shijie 2013-06-14 8:06 ` Huang Shijie 2013-06-14 8:06 ` [PATCH 4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy Huang Shijie 2013-06-14 8:06 ` Huang Shijie 2013-08-11 6:09 ` [PATCH 0/4] mtd: gpmi: support two nand chips at most Brian Norris 2013-08-11 6:09 ` Brian Norris 2013-08-11 19:52 ` Huang Shijie 2013-08-11 19:52 ` Huang Shijie
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1371197185-27491-2-git-send-email-b32955@freescale.com \ --to=b32955@freescale.com \ --cc=dedekind1@gmail.com \ --cc=dwmw2@infradead.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-mtd@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.