From: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
To: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
"Eric Bénard" <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>,
"Denis Carikli" <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>,
"Jean-Christophe Plagniol-Villard"
<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>,
"Tomi Valkeinen" <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Rob Herring"
<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
"Pawel Moll" <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Stephen Warren"
<swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
"Ian Campbell"
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [Patch v2][ 08/37] video: mx3fb: Add device tree suport.
Date: Thu, 17 Oct 2013 17:02:06 +0200 [thread overview]
Message-ID: <1382022155-21954-9-git-send-email-denis@eukrea.com> (raw)
In-Reply-To: <1382022155-21954-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
Cc: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>
Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
.../devicetree/bindings/video/fsl,mx3-fb.txt | 52 ++++++++
drivers/video/Kconfig | 2 +
drivers/video/mx3fb.c | 133 +++++++++++++++++---
3 files changed, 171 insertions(+), 16 deletions(-)
create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
new file mode 100644
index 0000000..ae0b343
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
@@ -0,0 +1,52 @@
+Freescale mx3 Framebuffer
+
+This framebuffer driver supports the imx31 and imx35 devices.
+
+Required properties:
+- compatible : Must be "fsl,mx3-fb".
+- reg : Should contain 1 register ranges(address and length).
+- dmas : Phandle to the ipu dma node as described in
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names : Must be "tx".
+- clocks : Phandle to the ipu source clock.
+- display: Phandle to a display node as described in
+ Documentation/devicetree/bindings/video/display-timing.txt
+ Additional, the display node has to define properties:
+ - bits-per-pixel: lcd panel bit-depth.
+
+Optional properties:
+- ipu-disp-format: could be "rgb666", "rgb565", or "rgb888".
+ If not specified defaults to "rgb666".
+
+Example:
+
+ lcdc: mx3fb@53fc00b4 {
+ compatible = "fsl,mx3-fb";
+ reg = <0x53fc00b4 0x0b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdc_1>;
+ clocks = <&clks 55>;
+ dmas = <&ipu 14>;
+ dma-names = "tx";
+ };
+
+ ...
+
+ cmo_qvga: display {
+ model = "CMO-QVGA";
+ bits-per-pixel = <16>;
+ native-mode = <&qvga_timings>;
+ display-timings {
+ qvga_timings: 320x240 {
+ clock-frequency = <6500000>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <30>;
+ hfront-porch = <38>;
+ vback-porch = <20>;
+ vfront-porch = <3>;
+ hsync-len = <15>;
+ vsync-len = <4>;
+ };
+ };
+ };
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 14317b7..2a638df 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2359,6 +2359,8 @@ config FB_MX3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VIDEOMODE_HELPERS
+ select FB_MODE_HELPERS
default y
help
This is a framebuffer device for the i.MX31 LCD Controller. So
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 37704da..8683dda 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -32,6 +32,8 @@
#include <linux/platform_data/dma-imx.h>
#include <linux/platform_data/video-mx3fb.h>
+#include <video/of_display_timing.h>
+
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -759,11 +761,13 @@ static int __set_par(struct fb_info *fbi, bool lock)
sig_cfg.Hsync_pol = true;
if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
sig_cfg.Vsync_pol = true;
- if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+ if ((fbi->var.sync & FB_SYNC_CLK_INVERT) ||
+ (fbi->var.sync & FB_SYNC_PIXDAT_HIGH_ACT))
sig_cfg.clk_pol = true;
if (fbi->var.sync & FB_SYNC_DATA_INVERT)
sig_cfg.data_pol = true;
- if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+ if ((fbi->var.sync & FB_SYNC_OE_ACT_HIGH) ||
+ (fbi->var.sync & FB_SYNC_DE_HIGH_ACT))
sig_cfg.enable_pol = true;
if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
sig_cfg.clkidle_en = true;
@@ -1392,21 +1396,63 @@ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
return fbi;
}
+static int match_dt_disp_data(const char *property)
+{
+ if (!strcmp("rgb666", property))
+ return IPU_DISP_DATA_MAPPING_RGB666;
+ else if (!strcmp("rgb565", property))
+ return IPU_DISP_DATA_MAPPING_RGB565;
+ else if (!strcmp("rgb888", property))
+ return IPU_DISP_DATA_MAPPING_RGB888;
+ else
+ return -EINVAL;
+}
+
static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
{
struct device *dev = mx3fb->dev;
struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
- const char *name = mx3fb_pdata->name;
+ struct device_node *np = dev->of_node;
+ const char *name;
+ const char *ipu_disp_format;
unsigned int irq;
struct fb_info *fbi;
struct mx3fb_info *mx3fbi;
const struct fb_videomode *mode;
int ret, num_modes;
+ struct fb_videomode of_mode;
+ enum disp_data_mapping disp_data_fmt = IPU_DISP_DATA_MAPPING_RGB666;
+ struct device_node *display_np, *timings_np;
+
+ if (np) {
+ of_property_read_string(np, "ipu-disp-format",
+ &ipu_disp_format);
+ if (!ipu_disp_format) {
+ dev_err(dev, "Can't get ipu display data mapping.\n");
+ return -EINVAL;
+ }
+
+ mx3fb->disp_data_fmt = match_dt_disp_data(ipu_disp_format);
+ if (mx3fb->disp_data_fmt == -EINVAL) {
+ dev_err(dev, "Illegal display data format \"%s\"\n",
+ ipu_disp_format);
+ return -EINVAL;
+ }
- if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
- dev_err(dev, "Illegal display data format %d\n",
+ display_np = of_parse_phandle(np, "display", 0);
+ if (!display_np) {
+ dev_err(dev, "failed to find display phandle\n");
+ return -ENOENT;
+ }
+
+ of_property_read_string(display_np, "model", &name);
+ } else {
+ name = mx3fb_pdata->name;
+ if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
+ dev_err(dev, "Illegal display data format %d\n",
mx3fb_pdata->disp_data_fmt);
- return -EINVAL;
+ return -EINVAL;
+ }
}
ichan->client = mx3fb;
@@ -1427,12 +1473,39 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
goto emode;
}
- if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
- mode = mx3fb_pdata->mode;
- num_modes = mx3fb_pdata->num_modes;
+ if (np) {
+ of_property_read_string(np, "ipu-disp-format",
+ &ipu_disp_format);
+ if (!ipu_disp_format) {
+ dev_err(dev, "Can't get ipu display data mapping.\n");
+ return -EINVAL;
+ }
+
+ disp_data_fmt = match_dt_disp_data(ipu_disp_format);
+
+ if (disp_data_fmt == -EINVAL) {
+ dev_err(dev, "Illegal display data format \"%s\" for "
+ "the node %s\n", ipu_disp_format, np->name);
+ return -EINVAL;
+ }
+
+ ret = of_get_fb_videomode(display_np, &of_mode,
+ OF_USE_NATIVE_MODE);
+ if (!ret) {
+ mode = &of_mode;
+ num_modes = 1;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
} else {
- mode = mx3fb_modedb;
- num_modes = ARRAY_SIZE(mx3fb_modedb);
+ if (mx3fb_pdata->mode || !mx3fb_pdata->num_modes) {
+ mode = mx3fb_pdata->mode;
+ num_modes = mx3fb_pdata->num_modes;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
}
if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
@@ -1462,7 +1535,10 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
mx3fbi->mx3fb = mx3fb;
mx3fbi->blank = FB_BLANK_NORMAL;
- mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
+ if (!np)
+ mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
+ else
+ mx3fb->disp_data_fmt = disp_data_fmt;
init_completion(&mx3fbi->flip_cmpl);
disable_irq(ichan->eof_irq);
@@ -1494,13 +1570,26 @@ emode:
return ret;
}
+static int imx_dma_is_dt_ipu(struct dma_chan *chan)
+{
+ /* Example: 53fc0000.ipu */
+ if (chan && chan->device && chan->device->dev) {
+ char *name = dev_name(chan->device->dev);
+ name = strchr(name, '.');
+ if (name)
+ return !strcmp(name, ".ipu");
+ }
+
+ return 0;
+}
+
static bool chan_filter(struct dma_chan *chan, void *arg)
{
struct dma_chan_request *rq = arg;
struct device *dev;
struct mx3fb_platform_data *mx3fb_pdata;
- if (!imx_dma_is_ipu(chan))
+ if (!imx_dma_is_ipu(chan) && !imx_dma_is_dt_ipu(chan))
return false;
if (!rq)
@@ -1509,8 +1598,12 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
dev = rq->mx3fb->dev;
mx3fb_pdata = dev_get_platdata(dev);
- return rq->id == chan->chan_id &&
- mx3fb_pdata->dma_dev == chan->device->dev;
+ /* When using the devicetree, mx3fb_pdata is NULL */
+ if (imx_dma_is_dt_ipu(chan))
+ return rq->id == chan->chan_id;
+ else
+ return rq->id == chan->chan_id &&
+ mx3fb_pdata->dma_dev == chan->device->dev;
}
static void release_fbi(struct fb_info *fbi)
@@ -1567,7 +1660,8 @@ static int mx3fb_probe(struct platform_device *pdev)
dma_cap_set(DMA_SLAVE, mask);
dma_cap_set(DMA_PRIVATE, mask);
rq.id = IDMAC_SDC_0;
- chan = dma_request_channel(mask, chan_filter, &rq);
+ chan = dma_request_slave_channel_compat(mask, chan_filter, &rq, dev,
+ "tx");
if (!chan) {
ret = -EBUSY;
goto ersdc0;
@@ -1610,9 +1704,16 @@ static int mx3fb_remove(struct platform_device *dev)
return 0;
}
+static struct of_device_id mx3fb_of_dev_id[] = {
+ { .compatible = "fsl,mx3-fb", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mx3fb_of_dev_id);
+
static struct platform_driver mx3fb_driver = {
.driver = {
.name = MX3FB_NAME,
+ .of_match_table = mx3fb_of_dev_id,
.owner = THIS_MODULE,
},
.probe = mx3fb_probe,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Denis Carikli <denis@eukrea.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v2][ 08/37] video: mx3fb: Add device tree suport.
Date: Thu, 17 Oct 2013 15:02:06 +0000 [thread overview]
Message-ID: <1382022155-21954-9-git-send-email-denis@eukrea.com> (raw)
In-Reply-To: <1382022155-21954-1-git-send-email-denis@eukrea.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
.../devicetree/bindings/video/fsl,mx3-fb.txt | 52 ++++++++
drivers/video/Kconfig | 2 +
drivers/video/mx3fb.c | 133 +++++++++++++++++---
3 files changed, 171 insertions(+), 16 deletions(-)
create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
new file mode 100644
index 0000000..ae0b343
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
@@ -0,0 +1,52 @@
+Freescale mx3 Framebuffer
+
+This framebuffer driver supports the imx31 and imx35 devices.
+
+Required properties:
+- compatible : Must be "fsl,mx3-fb".
+- reg : Should contain 1 register ranges(address and length).
+- dmas : Phandle to the ipu dma node as described in
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names : Must be "tx".
+- clocks : Phandle to the ipu source clock.
+- display: Phandle to a display node as described in
+ Documentation/devicetree/bindings/video/display-timing.txt
+ Additional, the display node has to define properties:
+ - bits-per-pixel: lcd panel bit-depth.
+
+Optional properties:
+- ipu-disp-format: could be "rgb666", "rgb565", or "rgb888".
+ If not specified defaults to "rgb666".
+
+Example:
+
+ lcdc: mx3fb@53fc00b4 {
+ compatible = "fsl,mx3-fb";
+ reg = <0x53fc00b4 0x0b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdc_1>;
+ clocks = <&clks 55>;
+ dmas = <&ipu 14>;
+ dma-names = "tx";
+ };
+
+ ...
+
+ cmo_qvga: display {
+ model = "CMO-QVGA";
+ bits-per-pixel = <16>;
+ native-mode = <&qvga_timings>;
+ display-timings {
+ qvga_timings: 320x240 {
+ clock-frequency = <6500000>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <30>;
+ hfront-porch = <38>;
+ vback-porch = <20>;
+ vfront-porch = <3>;
+ hsync-len = <15>;
+ vsync-len = <4>;
+ };
+ };
+ };
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 14317b7..2a638df 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2359,6 +2359,8 @@ config FB_MX3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VIDEOMODE_HELPERS
+ select FB_MODE_HELPERS
default y
help
This is a framebuffer device for the i.MX31 LCD Controller. So
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 37704da..8683dda 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -32,6 +32,8 @@
#include <linux/platform_data/dma-imx.h>
#include <linux/platform_data/video-mx3fb.h>
+#include <video/of_display_timing.h>
+
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -759,11 +761,13 @@ static int __set_par(struct fb_info *fbi, bool lock)
sig_cfg.Hsync_pol = true;
if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
sig_cfg.Vsync_pol = true;
- if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+ if ((fbi->var.sync & FB_SYNC_CLK_INVERT) ||
+ (fbi->var.sync & FB_SYNC_PIXDAT_HIGH_ACT))
sig_cfg.clk_pol = true;
if (fbi->var.sync & FB_SYNC_DATA_INVERT)
sig_cfg.data_pol = true;
- if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+ if ((fbi->var.sync & FB_SYNC_OE_ACT_HIGH) ||
+ (fbi->var.sync & FB_SYNC_DE_HIGH_ACT))
sig_cfg.enable_pol = true;
if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
sig_cfg.clkidle_en = true;
@@ -1392,21 +1396,63 @@ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
return fbi;
}
+static int match_dt_disp_data(const char *property)
+{
+ if (!strcmp("rgb666", property))
+ return IPU_DISP_DATA_MAPPING_RGB666;
+ else if (!strcmp("rgb565", property))
+ return IPU_DISP_DATA_MAPPING_RGB565;
+ else if (!strcmp("rgb888", property))
+ return IPU_DISP_DATA_MAPPING_RGB888;
+ else
+ return -EINVAL;
+}
+
static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
{
struct device *dev = mx3fb->dev;
struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
- const char *name = mx3fb_pdata->name;
+ struct device_node *np = dev->of_node;
+ const char *name;
+ const char *ipu_disp_format;
unsigned int irq;
struct fb_info *fbi;
struct mx3fb_info *mx3fbi;
const struct fb_videomode *mode;
int ret, num_modes;
+ struct fb_videomode of_mode;
+ enum disp_data_mapping disp_data_fmt = IPU_DISP_DATA_MAPPING_RGB666;
+ struct device_node *display_np, *timings_np;
+
+ if (np) {
+ of_property_read_string(np, "ipu-disp-format",
+ &ipu_disp_format);
+ if (!ipu_disp_format) {
+ dev_err(dev, "Can't get ipu display data mapping.\n");
+ return -EINVAL;
+ }
+
+ mx3fb->disp_data_fmt = match_dt_disp_data(ipu_disp_format);
+ if (mx3fb->disp_data_fmt = -EINVAL) {
+ dev_err(dev, "Illegal display data format \"%s\"\n",
+ ipu_disp_format);
+ return -EINVAL;
+ }
- if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
- dev_err(dev, "Illegal display data format %d\n",
+ display_np = of_parse_phandle(np, "display", 0);
+ if (!display_np) {
+ dev_err(dev, "failed to find display phandle\n");
+ return -ENOENT;
+ }
+
+ of_property_read_string(display_np, "model", &name);
+ } else {
+ name = mx3fb_pdata->name;
+ if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
+ dev_err(dev, "Illegal display data format %d\n",
mx3fb_pdata->disp_data_fmt);
- return -EINVAL;
+ return -EINVAL;
+ }
}
ichan->client = mx3fb;
@@ -1427,12 +1473,39 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
goto emode;
}
- if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
- mode = mx3fb_pdata->mode;
- num_modes = mx3fb_pdata->num_modes;
+ if (np) {
+ of_property_read_string(np, "ipu-disp-format",
+ &ipu_disp_format);
+ if (!ipu_disp_format) {
+ dev_err(dev, "Can't get ipu display data mapping.\n");
+ return -EINVAL;
+ }
+
+ disp_data_fmt = match_dt_disp_data(ipu_disp_format);
+
+ if (disp_data_fmt = -EINVAL) {
+ dev_err(dev, "Illegal display data format \"%s\" for "
+ "the node %s\n", ipu_disp_format, np->name);
+ return -EINVAL;
+ }
+
+ ret = of_get_fb_videomode(display_np, &of_mode,
+ OF_USE_NATIVE_MODE);
+ if (!ret) {
+ mode = &of_mode;
+ num_modes = 1;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
} else {
- mode = mx3fb_modedb;
- num_modes = ARRAY_SIZE(mx3fb_modedb);
+ if (mx3fb_pdata->mode || !mx3fb_pdata->num_modes) {
+ mode = mx3fb_pdata->mode;
+ num_modes = mx3fb_pdata->num_modes;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
}
if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
@@ -1462,7 +1535,10 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
mx3fbi->mx3fb = mx3fb;
mx3fbi->blank = FB_BLANK_NORMAL;
- mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
+ if (!np)
+ mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
+ else
+ mx3fb->disp_data_fmt = disp_data_fmt;
init_completion(&mx3fbi->flip_cmpl);
disable_irq(ichan->eof_irq);
@@ -1494,13 +1570,26 @@ emode:
return ret;
}
+static int imx_dma_is_dt_ipu(struct dma_chan *chan)
+{
+ /* Example: 53fc0000.ipu */
+ if (chan && chan->device && chan->device->dev) {
+ char *name = dev_name(chan->device->dev);
+ name = strchr(name, '.');
+ if (name)
+ return !strcmp(name, ".ipu");
+ }
+
+ return 0;
+}
+
static bool chan_filter(struct dma_chan *chan, void *arg)
{
struct dma_chan_request *rq = arg;
struct device *dev;
struct mx3fb_platform_data *mx3fb_pdata;
- if (!imx_dma_is_ipu(chan))
+ if (!imx_dma_is_ipu(chan) && !imx_dma_is_dt_ipu(chan))
return false;
if (!rq)
@@ -1509,8 +1598,12 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
dev = rq->mx3fb->dev;
mx3fb_pdata = dev_get_platdata(dev);
- return rq->id = chan->chan_id &&
- mx3fb_pdata->dma_dev = chan->device->dev;
+ /* When using the devicetree, mx3fb_pdata is NULL */
+ if (imx_dma_is_dt_ipu(chan))
+ return rq->id = chan->chan_id;
+ else
+ return rq->id = chan->chan_id &&
+ mx3fb_pdata->dma_dev = chan->device->dev;
}
static void release_fbi(struct fb_info *fbi)
@@ -1567,7 +1660,8 @@ static int mx3fb_probe(struct platform_device *pdev)
dma_cap_set(DMA_SLAVE, mask);
dma_cap_set(DMA_PRIVATE, mask);
rq.id = IDMAC_SDC_0;
- chan = dma_request_channel(mask, chan_filter, &rq);
+ chan = dma_request_slave_channel_compat(mask, chan_filter, &rq, dev,
+ "tx");
if (!chan) {
ret = -EBUSY;
goto ersdc0;
@@ -1610,9 +1704,16 @@ static int mx3fb_remove(struct platform_device *dev)
return 0;
}
+static struct of_device_id mx3fb_of_dev_id[] = {
+ { .compatible = "fsl,mx3-fb", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mx3fb_of_dev_id);
+
static struct platform_driver mx3fb_driver = {
.driver = {
.name = MX3FB_NAME,
+ .of_match_table = mx3fb_of_dev_id,
.owner = THIS_MODULE,
},
.probe = mx3fb_probe,
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: denis@eukrea.com (Denis Carikli)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v2][ 08/37] video: mx3fb: Add device tree suport.
Date: Thu, 17 Oct 2013 17:02:06 +0200 [thread overview]
Message-ID: <1382022155-21954-9-git-send-email-denis@eukrea.com> (raw)
In-Reply-To: <1382022155-21954-1-git-send-email-denis@eukrea.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev at vger.kernel.org
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree at vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
.../devicetree/bindings/video/fsl,mx3-fb.txt | 52 ++++++++
drivers/video/Kconfig | 2 +
drivers/video/mx3fb.c | 133 +++++++++++++++++---
3 files changed, 171 insertions(+), 16 deletions(-)
create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
new file mode 100644
index 0000000..ae0b343
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
@@ -0,0 +1,52 @@
+Freescale mx3 Framebuffer
+
+This framebuffer driver supports the imx31 and imx35 devices.
+
+Required properties:
+- compatible : Must be "fsl,mx3-fb".
+- reg : Should contain 1 register ranges(address and length).
+- dmas : Phandle to the ipu dma node as described in
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names : Must be "tx".
+- clocks : Phandle to the ipu source clock.
+- display: Phandle to a display node as described in
+ Documentation/devicetree/bindings/video/display-timing.txt
+ Additional, the display node has to define properties:
+ - bits-per-pixel: lcd panel bit-depth.
+
+Optional properties:
+- ipu-disp-format: could be "rgb666", "rgb565", or "rgb888".
+ If not specified defaults to "rgb666".
+
+Example:
+
+ lcdc: mx3fb at 53fc00b4 {
+ compatible = "fsl,mx3-fb";
+ reg = <0x53fc00b4 0x0b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdc_1>;
+ clocks = <&clks 55>;
+ dmas = <&ipu 14>;
+ dma-names = "tx";
+ };
+
+ ...
+
+ cmo_qvga: display {
+ model = "CMO-QVGA";
+ bits-per-pixel = <16>;
+ native-mode = <&qvga_timings>;
+ display-timings {
+ qvga_timings: 320x240 {
+ clock-frequency = <6500000>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <30>;
+ hfront-porch = <38>;
+ vback-porch = <20>;
+ vfront-porch = <3>;
+ hsync-len = <15>;
+ vsync-len = <4>;
+ };
+ };
+ };
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 14317b7..2a638df 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2359,6 +2359,8 @@ config FB_MX3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VIDEOMODE_HELPERS
+ select FB_MODE_HELPERS
default y
help
This is a framebuffer device for the i.MX31 LCD Controller. So
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 37704da..8683dda 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -32,6 +32,8 @@
#include <linux/platform_data/dma-imx.h>
#include <linux/platform_data/video-mx3fb.h>
+#include <video/of_display_timing.h>
+
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -759,11 +761,13 @@ static int __set_par(struct fb_info *fbi, bool lock)
sig_cfg.Hsync_pol = true;
if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
sig_cfg.Vsync_pol = true;
- if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+ if ((fbi->var.sync & FB_SYNC_CLK_INVERT) ||
+ (fbi->var.sync & FB_SYNC_PIXDAT_HIGH_ACT))
sig_cfg.clk_pol = true;
if (fbi->var.sync & FB_SYNC_DATA_INVERT)
sig_cfg.data_pol = true;
- if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+ if ((fbi->var.sync & FB_SYNC_OE_ACT_HIGH) ||
+ (fbi->var.sync & FB_SYNC_DE_HIGH_ACT))
sig_cfg.enable_pol = true;
if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
sig_cfg.clkidle_en = true;
@@ -1392,21 +1396,63 @@ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
return fbi;
}
+static int match_dt_disp_data(const char *property)
+{
+ if (!strcmp("rgb666", property))
+ return IPU_DISP_DATA_MAPPING_RGB666;
+ else if (!strcmp("rgb565", property))
+ return IPU_DISP_DATA_MAPPING_RGB565;
+ else if (!strcmp("rgb888", property))
+ return IPU_DISP_DATA_MAPPING_RGB888;
+ else
+ return -EINVAL;
+}
+
static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
{
struct device *dev = mx3fb->dev;
struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
- const char *name = mx3fb_pdata->name;
+ struct device_node *np = dev->of_node;
+ const char *name;
+ const char *ipu_disp_format;
unsigned int irq;
struct fb_info *fbi;
struct mx3fb_info *mx3fbi;
const struct fb_videomode *mode;
int ret, num_modes;
+ struct fb_videomode of_mode;
+ enum disp_data_mapping disp_data_fmt = IPU_DISP_DATA_MAPPING_RGB666;
+ struct device_node *display_np, *timings_np;
+
+ if (np) {
+ of_property_read_string(np, "ipu-disp-format",
+ &ipu_disp_format);
+ if (!ipu_disp_format) {
+ dev_err(dev, "Can't get ipu display data mapping.\n");
+ return -EINVAL;
+ }
+
+ mx3fb->disp_data_fmt = match_dt_disp_data(ipu_disp_format);
+ if (mx3fb->disp_data_fmt == -EINVAL) {
+ dev_err(dev, "Illegal display data format \"%s\"\n",
+ ipu_disp_format);
+ return -EINVAL;
+ }
- if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
- dev_err(dev, "Illegal display data format %d\n",
+ display_np = of_parse_phandle(np, "display", 0);
+ if (!display_np) {
+ dev_err(dev, "failed to find display phandle\n");
+ return -ENOENT;
+ }
+
+ of_property_read_string(display_np, "model", &name);
+ } else {
+ name = mx3fb_pdata->name;
+ if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
+ dev_err(dev, "Illegal display data format %d\n",
mx3fb_pdata->disp_data_fmt);
- return -EINVAL;
+ return -EINVAL;
+ }
}
ichan->client = mx3fb;
@@ -1427,12 +1473,39 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
goto emode;
}
- if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
- mode = mx3fb_pdata->mode;
- num_modes = mx3fb_pdata->num_modes;
+ if (np) {
+ of_property_read_string(np, "ipu-disp-format",
+ &ipu_disp_format);
+ if (!ipu_disp_format) {
+ dev_err(dev, "Can't get ipu display data mapping.\n");
+ return -EINVAL;
+ }
+
+ disp_data_fmt = match_dt_disp_data(ipu_disp_format);
+
+ if (disp_data_fmt == -EINVAL) {
+ dev_err(dev, "Illegal display data format \"%s\" for "
+ "the node %s\n", ipu_disp_format, np->name);
+ return -EINVAL;
+ }
+
+ ret = of_get_fb_videomode(display_np, &of_mode,
+ OF_USE_NATIVE_MODE);
+ if (!ret) {
+ mode = &of_mode;
+ num_modes = 1;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
} else {
- mode = mx3fb_modedb;
- num_modes = ARRAY_SIZE(mx3fb_modedb);
+ if (mx3fb_pdata->mode || !mx3fb_pdata->num_modes) {
+ mode = mx3fb_pdata->mode;
+ num_modes = mx3fb_pdata->num_modes;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
}
if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
@@ -1462,7 +1535,10 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
mx3fbi->mx3fb = mx3fb;
mx3fbi->blank = FB_BLANK_NORMAL;
- mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
+ if (!np)
+ mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
+ else
+ mx3fb->disp_data_fmt = disp_data_fmt;
init_completion(&mx3fbi->flip_cmpl);
disable_irq(ichan->eof_irq);
@@ -1494,13 +1570,26 @@ emode:
return ret;
}
+static int imx_dma_is_dt_ipu(struct dma_chan *chan)
+{
+ /* Example: 53fc0000.ipu */
+ if (chan && chan->device && chan->device->dev) {
+ char *name = dev_name(chan->device->dev);
+ name = strchr(name, '.');
+ if (name)
+ return !strcmp(name, ".ipu");
+ }
+
+ return 0;
+}
+
static bool chan_filter(struct dma_chan *chan, void *arg)
{
struct dma_chan_request *rq = arg;
struct device *dev;
struct mx3fb_platform_data *mx3fb_pdata;
- if (!imx_dma_is_ipu(chan))
+ if (!imx_dma_is_ipu(chan) && !imx_dma_is_dt_ipu(chan))
return false;
if (!rq)
@@ -1509,8 +1598,12 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
dev = rq->mx3fb->dev;
mx3fb_pdata = dev_get_platdata(dev);
- return rq->id == chan->chan_id &&
- mx3fb_pdata->dma_dev == chan->device->dev;
+ /* When using the devicetree, mx3fb_pdata is NULL */
+ if (imx_dma_is_dt_ipu(chan))
+ return rq->id == chan->chan_id;
+ else
+ return rq->id == chan->chan_id &&
+ mx3fb_pdata->dma_dev == chan->device->dev;
}
static void release_fbi(struct fb_info *fbi)
@@ -1567,7 +1660,8 @@ static int mx3fb_probe(struct platform_device *pdev)
dma_cap_set(DMA_SLAVE, mask);
dma_cap_set(DMA_PRIVATE, mask);
rq.id = IDMAC_SDC_0;
- chan = dma_request_channel(mask, chan_filter, &rq);
+ chan = dma_request_slave_channel_compat(mask, chan_filter, &rq, dev,
+ "tx");
if (!chan) {
ret = -EBUSY;
goto ersdc0;
@@ -1610,9 +1704,16 @@ static int mx3fb_remove(struct platform_device *dev)
return 0;
}
+static struct of_device_id mx3fb_of_dev_id[] = {
+ { .compatible = "fsl,mx3-fb", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mx3fb_of_dev_id);
+
static struct platform_driver mx3fb_driver = {
.driver = {
.name = MX3FB_NAME,
+ .of_match_table = mx3fb_of_dev_id,
.owner = THIS_MODULE,
},
.probe = mx3fb_probe,
--
1.7.9.5
next prev parent reply other threads:[~2013-10-17 15:02 UTC|newest]
Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-17 15:01 Devicetree support for Eukrea cpuimx{25,35,51} (v2) Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 03/37] drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-18 7:46 ` Ville Syrjälä
2013-10-18 7:46 ` Ville Syrjälä
2013-10-18 7:46 ` Ville Syrjälä
2013-10-23 14:48 ` Denis Carikli
2013-10-23 14:48 ` Denis Carikli
2013-10-23 14:48 ` Denis Carikli
2013-10-23 15:38 ` Ville Syrjälä
2013-10-23 15:38 ` Ville Syrjälä
2013-10-23 15:38 ` Ville Syrjälä
2013-10-23 15:47 ` Matt Sealey
2013-10-23 15:47 ` Matt Sealey
2013-10-23 15:47 ` Matt Sealey
2013-10-17 15:02 ` [Patch v2][ 04/37] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-31 14:06 ` Laurent Pinchart
2013-10-31 14:06 ` Laurent Pinchart
2013-10-31 14:06 ` Laurent Pinchart
2013-10-31 14:06 ` Laurent Pinchart
2013-10-17 15:02 ` [Patch v2][ 05/37] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-17 15:02 ` [Patch v2][ 07/37] video: mx3fb: Introduce regulator support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-17 15:02 ` [Patch v2][ 09/37] video: imxfb: " Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 11/37] staging: imx-drm: use of_get_display_timings Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-18 6:46 ` Sascha Hauer
2013-10-18 6:46 ` Sascha Hauer
2013-10-18 6:46 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 12/37] staging: imx-drm: ipuv3-crtc: don't harcode some mode flags Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 13/37] staging: imx-drm: Add RGB666 support for parallel display Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-17 15:02 ` [Patch v2][ 14/37] staging: imx-drm: parallel display: add regulator support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 16:47 ` Dan Carpenter
2013-10-17 16:47 ` Dan Carpenter
2013-10-17 16:47 ` Dan Carpenter
2013-10-17 15:02 ` [Patch v2][ 15/37] Input: tsc2007: Add device tree support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-18 8:36 ` Lothar Waßmann
2013-10-18 8:36 ` Lothar Waßmann
[not found] ` <1382022155-21954-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-17 15:01 ` [Patch v2][ 01/37] of: add vendor prefix for Eukréa Electromatique Denis Carikli
2013-10-17 15:01 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 02/37] dma: ipu: Add devicetree support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-3-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-18 6:42 ` Sascha Hauer
2013-10-18 6:42 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 06/37] video: backlight: gpio-backlight: Add DT support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli [this message]
2013-10-17 15:02 ` [Patch v2][ 08/37] video: mx3fb: Add device tree suport Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-19 11:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:04 ` Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <20131019110459.GM18477-HVbc7XotTAhnXn40ka+A6Q@public.gmane.org>
2013-10-21 8:03 ` Sascha Hauer
2013-10-21 8:03 ` Sascha Hauer
2013-10-21 8:03 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 10/37] video: imxfb: Also add pwmr for the device tree Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-11-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-19 10:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 10:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 10:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-17 15:02 ` [Patch v2][ 16/37] ASoC: eukrea-tlv320: Add DT support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-17-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-18 9:19 ` Lothar Waßmann
2013-10-18 9:19 ` Lothar Waßmann
2013-10-17 15:02 ` [Patch v2][ 17/37] DT: Add basic support for imx35-based devices Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-18-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-18 6:58 ` Sascha Hauer
2013-10-18 6:58 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 18/37] ARM: imx{25,27} DT: Permit the selection of the imxfb framebuffer driver Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 18/37] ARM: imx{25, 27} " Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 19/37] pinctrl: pinctrl-imx: add imx25 pinctrl driver Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 20/37] arm/dts: imx25.dtsi: Add some pinmux pins Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-21-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-18 7:02 ` Sascha Hauer
2013-10-18 7:02 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 21/37] arm/dts: i.MX25: Add ssi clocks and DMA events Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 22/37] arm/dts: i.MX25: Add sdma script path Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 23/37] arm/dts: imx25.dtsi: Add an alias for the Audio Multiplexer Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 24/37] arm/dts: Add support for the cpuimx25 board from Eukrea and its baseboard Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 25/37] arm/dts: imx51.dtsi: Add some pinmux pins Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 26/37] arm/dts: Add support for the cpuimx51 board from Eukrea and its baseboard Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 27/37] arm/dts: Add support for the cpuimx35 " Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 28/37] ARM: imx_v6_v7_defconfig: Enable i.MX35 DT support Denis Carikli
2013-10-18 8:23 ` Shawn Guo
2013-10-17 15:02 ` [Patch v2][ 29/37] ARM: imx_v6_v7_defconfig: Enable tsc2007 support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 30/37] ARM: imx_v6_v7_defconfig: Enable pcf8563 support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 31/37] ARM: imx_v6_v7_defconfig: Enable gpio regulator support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 32/37] ARM: imx_v4_v5_defconfig: " Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 33/37] ARM: imx_v4_v5_defconfig: Enable backlight gpio support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 34/37] ARM: imx_v6_v7_defconfig: " Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 35/37] ARM: imx_v4_v5_defconfig: Enable gpio button/keyboard support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 36/37] ARM: imx_v6_v7_defconfig: Enable led gpio support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 37/37] ARM: imx_v6_v7_defconfig: Enable heartbeat led trigger Denis Carikli
2013-10-18 7:59 ` Devicetree support for Eukrea cpuimx{25,35,51} (v2) Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382022155-21954-9-git-send-email-denis@eukrea.com \
--to=denis-fo0siakyzcbqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=tomi.valkeinen-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.