From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Cc: "Sascha Hauer" <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
"Eric Bénard" <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>,
"Rob Herring"
<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
"Pawel Moll" <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Stephen Warren"
<swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
"Ian Campbell"
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [Patch v2][ 20/37] arm/dts: imx25.dtsi: Add some pinmux pins.
Date: Fri, 18 Oct 2013 09:02:31 +0200 [thread overview]
Message-ID: <20131018070231.GU30088@pengutronix.de> (raw)
In-Reply-To: <1382022155-21954-21-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
On Thu, Oct 17, 2013 at 05:02:18PM +0200, Denis Carikli wrote:
> Uart1, fec, i2c1,esdhc1 and audmux were added.
>
> + fec {
> + pinctrl_fec_1: fecgrp-1 {
> + fsl,pins = <
> + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
> + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
> + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
> + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
> + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
> + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x800000c0
> + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x800000c0
> + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x800000c0
The 0x8000xxxx values don't make sense:
NO_PAD_CTL(1 << 31): indicate this pin does not need config.
So by setting bit 31 you ask to ignore the settings, still you set other
bits.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v2][ 20/37] arm/dts: imx25.dtsi: Add some pinmux pins.
Date: Fri, 18 Oct 2013 09:02:31 +0200 [thread overview]
Message-ID: <20131018070231.GU30088@pengutronix.de> (raw)
In-Reply-To: <1382022155-21954-21-git-send-email-denis@eukrea.com>
On Thu, Oct 17, 2013 at 05:02:18PM +0200, Denis Carikli wrote:
> Uart1, fec, i2c1,esdhc1 and audmux were added.
>
> + fec {
> + pinctrl_fec_1: fecgrp-1 {
> + fsl,pins = <
> + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
> + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
> + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
> + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
> + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
> + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x800000c0
> + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x800000c0
> + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x800000c0
The 0x8000xxxx values don't make sense:
NO_PAD_CTL(1 << 31): indicate this pin does not need config.
So by setting bit 31 you ask to ignore the settings, still you set other
bits.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2013-10-18 7:02 UTC|newest]
Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-17 15:01 Devicetree support for Eukrea cpuimx{25,35,51} (v2) Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 03/37] drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-18 7:46 ` Ville Syrjälä
2013-10-18 7:46 ` Ville Syrjälä
2013-10-18 7:46 ` Ville Syrjälä
2013-10-23 14:48 ` Denis Carikli
2013-10-23 14:48 ` Denis Carikli
2013-10-23 14:48 ` Denis Carikli
2013-10-23 15:38 ` Ville Syrjälä
2013-10-23 15:38 ` Ville Syrjälä
2013-10-23 15:38 ` Ville Syrjälä
2013-10-23 15:47 ` Matt Sealey
2013-10-23 15:47 ` Matt Sealey
2013-10-23 15:47 ` Matt Sealey
2013-10-17 15:02 ` [Patch v2][ 04/37] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-31 14:06 ` Laurent Pinchart
2013-10-31 14:06 ` Laurent Pinchart
2013-10-31 14:06 ` Laurent Pinchart
2013-10-31 14:06 ` Laurent Pinchart
2013-10-17 15:02 ` [Patch v2][ 05/37] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-17 15:02 ` [Patch v2][ 07/37] video: mx3fb: Introduce regulator support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-17 15:02 ` [Patch v2][ 09/37] video: imxfb: " Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 11/37] staging: imx-drm: use of_get_display_timings Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-18 6:46 ` Sascha Hauer
2013-10-18 6:46 ` Sascha Hauer
2013-10-18 6:46 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 12/37] staging: imx-drm: ipuv3-crtc: don't harcode some mode flags Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 13/37] staging: imx-drm: Add RGB666 support for parallel display Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-17 15:02 ` [Patch v2][ 14/37] staging: imx-drm: parallel display: add regulator support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 16:47 ` Dan Carpenter
2013-10-17 16:47 ` Dan Carpenter
2013-10-17 16:47 ` Dan Carpenter
2013-10-17 15:02 ` [Patch v2][ 15/37] Input: tsc2007: Add device tree support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-18 8:36 ` Lothar Waßmann
2013-10-18 8:36 ` Lothar Waßmann
[not found] ` <1382022155-21954-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-17 15:01 ` [Patch v2][ 01/37] of: add vendor prefix for Eukréa Electromatique Denis Carikli
2013-10-17 15:01 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 02/37] dma: ipu: Add devicetree support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-3-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-18 6:42 ` Sascha Hauer
2013-10-18 6:42 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 06/37] video: backlight: gpio-backlight: Add DT support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 08/37] video: mx3fb: Add device tree suport Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-19 11:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 11:04 ` Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <20131019110459.GM18477-HVbc7XotTAhnXn40ka+A6Q@public.gmane.org>
2013-10-21 8:03 ` Sascha Hauer
2013-10-21 8:03 ` Sascha Hauer
2013-10-21 8:03 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 10/37] video: imxfb: Also add pwmr for the device tree Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-11-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-19 10:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 10:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-19 10:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-17 15:02 ` [Patch v2][ 16/37] ASoC: eukrea-tlv320: Add DT support Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-17-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-18 9:19 ` Lothar Waßmann
2013-10-18 9:19 ` Lothar Waßmann
2013-10-17 15:02 ` [Patch v2][ 17/37] DT: Add basic support for imx35-based devices Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-18-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-18 6:58 ` Sascha Hauer
2013-10-18 6:58 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 18/37] ARM: imx{25,27} DT: Permit the selection of the imxfb framebuffer driver Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 18/37] ARM: imx{25, 27} " Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 19/37] pinctrl: pinctrl-imx: add imx25 pinctrl driver Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 20/37] arm/dts: imx25.dtsi: Add some pinmux pins Denis Carikli
2013-10-17 15:02 ` Denis Carikli
[not found] ` <1382022155-21954-21-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-18 7:02 ` Sascha Hauer [this message]
2013-10-18 7:02 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 21/37] arm/dts: i.MX25: Add ssi clocks and DMA events Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 22/37] arm/dts: i.MX25: Add sdma script path Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 23/37] arm/dts: imx25.dtsi: Add an alias for the Audio Multiplexer Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 24/37] arm/dts: Add support for the cpuimx25 board from Eukrea and its baseboard Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 25/37] arm/dts: imx51.dtsi: Add some pinmux pins Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 26/37] arm/dts: Add support for the cpuimx51 board from Eukrea and its baseboard Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 27/37] arm/dts: Add support for the cpuimx35 " Denis Carikli
2013-10-17 15:02 ` Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 28/37] ARM: imx_v6_v7_defconfig: Enable i.MX35 DT support Denis Carikli
2013-10-18 8:23 ` Shawn Guo
2013-10-17 15:02 ` [Patch v2][ 29/37] ARM: imx_v6_v7_defconfig: Enable tsc2007 support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 30/37] ARM: imx_v6_v7_defconfig: Enable pcf8563 support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 31/37] ARM: imx_v6_v7_defconfig: Enable gpio regulator support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 32/37] ARM: imx_v4_v5_defconfig: " Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 33/37] ARM: imx_v4_v5_defconfig: Enable backlight gpio support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 34/37] ARM: imx_v6_v7_defconfig: " Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 35/37] ARM: imx_v4_v5_defconfig: Enable gpio button/keyboard support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 36/37] ARM: imx_v6_v7_defconfig: Enable led gpio support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 37/37] ARM: imx_v6_v7_defconfig: Enable heartbeat led trigger Denis Carikli
2013-10-18 7:59 ` Devicetree support for Eukrea cpuimx{25,35,51} (v2) Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131018070231.GU30088@pengutronix.de \
--to=s.hauer-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.