[PATCH 15/15] bus: omap_l3_noc: Add AM4372 interconnect error data

From: Nishanth Menon <nm@ti.com>
To: Tony Lindgren <tony@atomide.com>,
	Santosh Shilimkar <santosh.shilimkar@ti.com>,
	Sricharan R <r.sricharan@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>, Rajendra Nayak <rnayak@ti.com>,
	Nishanth Menon <nm@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 15/15] bus: omap_l3_noc: Add AM4372 interconnect error data
Date: Mon, 14 Apr 2014 11:25:26 -0500	[thread overview]
Message-ID: <1397492726-17203-17-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1397492726-17203-1-git-send-email-nm@ti.com>

From: Afzal Mohammed <afzal@ti.com>

Add AM4372 information to handle L3 error.

AM4372 has two clk domains 100f and 200s. Provide flagmux and data
associated with it.

NOTE: Timeout doesn't have STDERRLOG_MAIN register. And per hardware
team, L3 timeout error cannot be cleared the normal way (by setting
bit 31 in STDERRLOG_MAIN), instead it may be required to do system
reset. L3 error handler can't help in such scenarios.

Hence indicate timeout target offset as L3_TARGET_NOT_SUPPORTED as
done for undocumented bits.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
 .../devicetree/bindings/arm/omap/l3-noc.txt        |    1 +
 drivers/bus/omap_l3_noc.c                          |    1 +
 drivers/bus/omap_l3_noc.h                          |   85 ++++++++++++++++++++
 3 files changed, 87 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
index 45d0fc2..974624e 100644
--- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -7,6 +7,7 @@ Required properties:
 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
                Should be "ti,omap4-l3-noc" for OMAP4 family
 	       Should be "ti,dra7-l3-noc" for DRA7 family
+               Should be "ti,am4372-l3-noc" for AM43 family
 - reg:	Contains L3 register address range for each noc domain.
 - ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
 
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 9b32e53..9853e1d 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -177,6 +177,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 static const struct of_device_id l3_noc_match[] = {
 	{.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
 	{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
+	{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
 	{},
 };
 MODULE_DEVICE_TABLE(of, l3_noc_match);
diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
index 365a33c..91814e0 100644
--- a/drivers/bus/omap_l3_noc.h
+++ b/drivers/bus/omap_l3_noc.h
@@ -339,4 +339,89 @@ static const struct omap_l3 dra_l3_data = {
 	.num_masters = ARRAY_SIZE(dra_l3_masters),
 };
 
+/* AM4372 data */
+static struct l3_target_data am4372_l3_target_data_200f[] = {
+	{0xf00,  "EMIF",},
+	{0x1200, "DES",},
+	{0x400,  "OCMCRAM",},
+	{0x700,  "TPTC0",},
+	{0x800,  "TPTC1",},
+	{0x900,  "TPTC2"},
+	{0xb00,  "TPCC",},
+	{0xd00,  "DEBUGSS",},
+	{0xdead, L3_TARGET_NOT_SUPPORTED,},
+	{0x200,  "SHA",},
+	{0xc00,  "SGX530",},
+	{0x500,  "AES0",},
+	{0xa00,  "L4_FAST",},
+	{0x300,  "MPUSS_L2_RAM",},
+	{0x100,  "ICSS",},
+};
+
+static struct l3_flagmux_data am4372_l3_flagmux_200f = {
+	.offset = 0x1000,
+	.l3_targ = am4372_l3_target_data_200f,
+	.num_targ_data = ARRAY_SIZE(am4372_l3_target_data_200f),
+};
+
+static struct l3_target_data am4372_l3_target_data_100s[] = {
+	{0x100, "L4_PER_0",},
+	{0x200, "L4_PER_1",},
+	{0x300, "L4_PER_2",},
+	{0x400, "L4_PER_3",},
+	{0x800, "McASP0",},
+	{0x900, "McASP1",},
+	{0xC00, "MMCHS2",},
+	{0x700, "GPMC",},
+	{0xD00, "L4_FW",},
+	{0xdead, L3_TARGET_NOT_SUPPORTED,},
+	{0x500, "ADCTSC",},
+	{0xE00, "L4_WKUP",},
+	{0xA00, "MAG_CARD",},
+};
+
+static struct l3_flagmux_data am4372_l3_flagmux_100s = {
+	.offset = 0x600,
+	.l3_targ = am4372_l3_target_data_100s,
+	.num_targ_data = ARRAY_SIZE(am4372_l3_target_data_100s),
+};
+
+static struct l3_masters_data am4372_l3_masters[] = {
+	{ 0x0, "M1 (128-bit)"},
+	{ 0x0, "M2 (64-bit)"},
+	{ 0x4, "DAP"},
+	{ 0x5, "P1500"},
+	{ 0xC, "ICSS0"},
+	{ 0xD, "ICSS1"},
+	{ 0x18, "TPTC0 Read"},
+	{ 0x19, "TPTC0 Write"},
+	{ 0x1A, "TPTC1 Read"},
+	{ 0x1B, "TPTC1 Write"},
+	{ 0x1C, "TPTC2 Read"},
+	{ 0x1D, "TPTC2 Write"},
+	{ 0x20, "SGX530"},
+	{ 0x25, "DSS"},
+	{ 0x28, "Crypto DMA RD"},
+	{ 0x29, "Crypto DMA WR"},
+	{ 0x2C, "VPFE0"},
+	{ 0x2D, "VPFE1"},
+	{ 0x30, "GEMAC"},
+	{ 0x34, "USB0 RD"},
+	{ 0x35, "USB0 WR"},
+	{ 0x36, "USB1 RD"},
+	{ 0x37, "USB1 WR"},
+};
+
+static struct l3_flagmux_data *am4372_l3_flagmux[] = {
+	&am4372_l3_flagmux_200f,
+	&am4372_l3_flagmux_100s,
+};
+
+static const struct omap_l3 am4372_l3_data = {
+	.l3_flagmux = am4372_l3_flagmux,
+	.num_modules = ARRAY_SIZE(am4372_l3_flagmux),
+	.l3_masters = am4372_l3_masters,
+	.num_masters = ARRAY_SIZE(am4372_l3_masters),
+};
+
 #endif	/* __OMAP_L3_NOC_H */
-- 
1.7.9.5

