From: Mikko Perttunen <mperttunen@nvidia.com>
To: swarren@wwwdotorg.org, thierry.reding@gmail.com, tj@kernel.org,
pdeschrijver@nvidia.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-ide@vger.kernel.org,
Mikko Perttunen <mperttunen@nvidia.com>
Subject: [PATCH v2 3/7] ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
Date: Wed, 18 Jun 2014 17:23:22 +0300 [thread overview]
Message-ID: <1403101406-15439-4-git-send-email-mperttunen@nvidia.com> (raw)
In-Reply-To: <1403101406-15439-1-git-send-email-mperttunen@nvidia.com>
This enables the integrated SATA controller on the Tegra124 system-on-chip
on the Jetson TK1 board and adds regulators for the onboard Molex connector
commonly used to power SATA devices. The regulators are marked always-on
since they can be used for other purposes than powering SATA devices.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
v2:
- added target-v5-supply and target-12v-supply
- made sata power not always-on
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 35 +++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 11c1650..00ba373 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1687,6 +1687,18 @@
vbus-supply = <&vdd_usb3_vbus>;
};
+ /* Serial ATA */
+ sata@0,70020000 {
+ status = "okay";
+
+ hvdd-supply = <&vdd_3v3_lp0>;
+ vddio-supply = <&vdd_1v05_run>;
+ avdd-supply = <&vdd_1v05_run>;
+
+ target-5v-supply = <&vdd_5v0_sata>;
+ target-12v-supply = <&vdd_12v0_sata>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -1828,6 +1840,29 @@
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
+
+ /* Molex power connector */
+ vdd_5v0_sata: regulator@13 {
+ compatible = "regulator-fixed";
+ reg = <13>;
+ regulator-name = "+5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_12v0_sata: regulator@14 {
+ compatible = "regulator-fixed";
+ reg = <14>;
+ regulator-name = "+12V_SATA";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_mux>;
+ };
};
sound {
--
1.8.1.5
WARNING: multiple messages have this Message-ID (diff)
From: Mikko Perttunen <mperttunen@nvidia.com>
To: <swarren@wwwdotorg.org>, <thierry.reding@gmail.com>,
<tj@kernel.org>, <pdeschrijver@nvidia.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
<linux-ide@vger.kernel.org>,
Mikko Perttunen <mperttunen@nvidia.com>
Subject: [PATCH v2 3/7] ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
Date: Wed, 18 Jun 2014 17:23:22 +0300 [thread overview]
Message-ID: <1403101406-15439-4-git-send-email-mperttunen@nvidia.com> (raw)
In-Reply-To: <1403101406-15439-1-git-send-email-mperttunen@nvidia.com>
This enables the integrated SATA controller on the Tegra124 system-on-chip
on the Jetson TK1 board and adds regulators for the onboard Molex connector
commonly used to power SATA devices. The regulators are marked always-on
since they can be used for other purposes than powering SATA devices.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
v2:
- added target-v5-supply and target-12v-supply
- made sata power not always-on
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 35 +++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 11c1650..00ba373 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1687,6 +1687,18 @@
vbus-supply = <&vdd_usb3_vbus>;
};
+ /* Serial ATA */
+ sata@0,70020000 {
+ status = "okay";
+
+ hvdd-supply = <&vdd_3v3_lp0>;
+ vddio-supply = <&vdd_1v05_run>;
+ avdd-supply = <&vdd_1v05_run>;
+
+ target-5v-supply = <&vdd_5v0_sata>;
+ target-12v-supply = <&vdd_12v0_sata>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -1828,6 +1840,29 @@
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
+
+ /* Molex power connector */
+ vdd_5v0_sata: regulator@13 {
+ compatible = "regulator-fixed";
+ reg = <13>;
+ regulator-name = "+5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_12v0_sata: regulator@14 {
+ compatible = "regulator-fixed";
+ reg = <14>;
+ regulator-name = "+12V_SATA";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_mux>;
+ };
};
sound {
--
1.8.1.5
WARNING: multiple messages have this Message-ID (diff)
From: mperttunen@nvidia.com (Mikko Perttunen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/7] ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
Date: Wed, 18 Jun 2014 17:23:22 +0300 [thread overview]
Message-ID: <1403101406-15439-4-git-send-email-mperttunen@nvidia.com> (raw)
In-Reply-To: <1403101406-15439-1-git-send-email-mperttunen@nvidia.com>
This enables the integrated SATA controller on the Tegra124 system-on-chip
on the Jetson TK1 board and adds regulators for the onboard Molex connector
commonly used to power SATA devices. The regulators are marked always-on
since they can be used for other purposes than powering SATA devices.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
v2:
- added target-v5-supply and target-12v-supply
- made sata power not always-on
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 35 +++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 11c1650..00ba373 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1687,6 +1687,18 @@
vbus-supply = <&vdd_usb3_vbus>;
};
+ /* Serial ATA */
+ sata at 0,70020000 {
+ status = "okay";
+
+ hvdd-supply = <&vdd_3v3_lp0>;
+ vddio-supply = <&vdd_1v05_run>;
+ avdd-supply = <&vdd_1v05_run>;
+
+ target-5v-supply = <&vdd_5v0_sata>;
+ target-12v-supply = <&vdd_12v0_sata>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -1828,6 +1840,29 @@
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
+
+ /* Molex power connector */
+ vdd_5v0_sata: regulator at 13 {
+ compatible = "regulator-fixed";
+ reg = <13>;
+ regulator-name = "+5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_12v0_sata: regulator at 14 {
+ compatible = "regulator-fixed";
+ reg = <14>;
+ regulator-name = "+12V_SATA";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_mux>;
+ };
};
sound {
--
1.8.1.5
next prev parent reply other threads:[~2014-06-18 14:23 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-18 14:23 [PATCH v2 0/7] Serial ATA support for NVIDIA Tegra124 Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` [PATCH v2 1/7] of: Add NVIDIA Tegra SATA controller binding Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` [PATCH v2 2/7] ARM: tegra: Add SATA controller to Tegra124 device tree Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen [this message]
2014-06-18 14:23 ` [PATCH v2 3/7] ARM: tegra: Add SATA and SATA power to Jetson TK1 " Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` [PATCH v2 4/7] clk: tegra: Enable hardware control of SATA PLL Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-07-08 1:26 ` Andrew Bresticker
2014-07-08 1:26 ` Andrew Bresticker
2014-07-08 1:26 ` Andrew Bresticker
2014-07-08 7:30 ` [PATCH] clk: tegra: Use XUSB-compatible SATA PLL sequence Mikko Perttunen
2014-07-08 7:30 ` Mikko Perttunen
2014-07-08 7:30 ` Mikko Perttunen
2014-07-08 8:16 ` Peter De Schrijver
2014-07-08 8:16 ` Peter De Schrijver
2014-07-08 8:16 ` Peter De Schrijver
2014-06-18 14:23 ` [PATCH v2 5/7] clk: tegra: Add SATA clocks to Tegra124 initialization table Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-24 19:32 ` Stephen Warren
2014-06-24 19:32 ` Stephen Warren
2014-06-18 14:23 ` [PATCH v2 6/7] ata: Add support for the Tegra124 SATA controller Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
[not found] ` <1403101406-15439-7-git-send-email-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-06-24 19:35 ` Stephen Warren
2014-06-24 19:35 ` Stephen Warren
2014-06-24 19:35 ` Stephen Warren
2014-06-26 11:18 ` Mikko Perttunen
2014-06-26 11:18 ` Mikko Perttunen
2014-06-26 11:18 ` Mikko Perttunen
2014-07-08 8:20 ` Mikko Perttunen
2014-07-08 8:20 ` Mikko Perttunen
2014-07-08 8:20 ` Mikko Perttunen
2014-07-09 6:49 ` Thierry Reding
2014-07-09 6:49 ` Thierry Reding
2014-07-09 6:49 ` Thierry Reding
2014-07-09 13:45 ` Mikko Perttunen
2014-07-09 13:45 ` Mikko Perttunen
2014-07-09 13:45 ` Mikko Perttunen
2014-07-08 13:22 ` Tejun Heo
2014-07-08 13:22 ` Tejun Heo
2014-07-08 13:38 ` Mikko Perttunen
2014-07-08 13:38 ` Mikko Perttunen
2014-07-08 13:38 ` Mikko Perttunen
2014-07-14 6:21 ` Mikko Perttunen
2014-07-14 6:21 ` Mikko Perttunen
2014-07-14 6:21 ` Mikko Perttunen
[not found] ` <53C376FF.3060509-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-14 6:25 ` Hans de Goede
2014-07-14 6:25 ` Hans de Goede
2014-07-14 6:25 ` Hans de Goede
2014-07-14 6:28 ` Mikko Perttunen
2014-07-14 6:28 ` Mikko Perttunen
2014-07-14 6:28 ` Mikko Perttunen
[not found] ` <20140708132216.GA4979-Gd/HAXX7CRxy/B6EtB590w@public.gmane.org>
2014-07-14 13:36 ` Hans de Goede
2014-07-14 13:36 ` Hans de Goede
2014-07-14 13:36 ` Hans de Goede
2014-07-15 7:12 ` Mikko Perttunen
2014-07-15 7:12 ` Mikko Perttunen
2014-07-15 7:12 ` Mikko Perttunen
2014-07-15 8:55 ` Hans de Goede
2014-07-15 8:55 ` Hans de Goede
2014-07-15 8:55 ` Hans de Goede
[not found] ` <53C4EC81.1040304-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-07-15 9:03 ` Mikko Perttunen
2014-07-15 9:03 ` Mikko Perttunen
2014-07-15 9:03 ` Mikko Perttunen
2014-07-15 9:31 ` Thierry Reding
2014-07-15 9:31 ` Thierry Reding
2014-07-15 9:31 ` Thierry Reding
2014-06-18 14:23 ` [PATCH v2 7/7] ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
2014-06-18 14:23 ` Mikko Perttunen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403101406-15439-4-git-send-email-mperttunen@nvidia.com \
--to=mperttunen@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pdeschrijver@nvidia.com \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.