All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Viresh Kumar <viresh.kumar@linaro.org>,
	linux-pm@vger.kernel.org
Subject: [PATCH v2 02/15] clk: mux: Split out register accessors for reuse
Date: Fri,  5 Sep 2014 15:47:21 -0700	[thread overview]
Message-ID: <1409957256-23729-3-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1409957256-23729-1-git-send-email-sboyd@codeaurora.org>

We want to reuse the logic in clk-mux.c for other clock drivers
that don't use readl as register accessors. Fortunately, there
really isn't much to the mux code besides the table indirection
and quirk flags if you assume any bit shifting and masking has
been done already. Pull that logic out into reusable functions
that operate on an optional table and some flags so that other
drivers can use the same logic.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-mux.c        | 76 +++++++++++++++++++++++++++-----------------
 include/linux/clk-provider.h |  9 ++++--
 2 files changed, 54 insertions(+), 31 deletions(-)

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index c0cf9db9effa..54217961ae8a 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -29,35 +29,24 @@
 
 #define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
 
-static u8 clk_mux_get_parent(struct clk_hw *hw)
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+				unsigned int *table, unsigned long flags)
 {
-	struct clk_mux *mux = to_clk_mux(hw);
 	int num_parents = __clk_get_num_parents(hw->clk);
-	u32 val;
 
-	/*
-	 * FIXME need a mux-specific flag to determine if val is bitwise or numeric
-	 * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
-	 * to 0x7 (index starts at one)
-	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
-	 * val = 0x4 really means "bit 2, index starts at bit 0"
-	 */
-	val = clk_readl(mux->reg) >> mux->shift;
-	val &= mux->mask;
-
-	if (mux->table) {
+	if (table) {
 		int i;
 
 		for (i = 0; i < num_parents; i++)
-			if (mux->table[i] == val)
+			if (table[i] == val)
 				return i;
 		return -EINVAL;
 	}
 
-	if (val && (mux->flags & CLK_MUX_INDEX_BIT))
+	if (val && (flags & CLK_MUX_INDEX_BIT))
 		val = ffs(val) - 1;
 
-	if (val && (mux->flags & CLK_MUX_INDEX_ONE))
+	if (val && (flags & CLK_MUX_INDEX_ONE))
 		val--;
 
 	if (val >= num_parents)
@@ -65,24 +54,53 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 
 	return val;
 }
+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
 
-static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+static u8 _clk_mux_get_parent(struct clk_hw *hw)
 {
 	struct clk_mux *mux = to_clk_mux(hw);
 	u32 val;
-	unsigned long flags = 0;
 
-	if (mux->table)
-		index = mux->table[index];
+	/*
+	 * FIXME need a mux-specific flag to determine if val is bitwise or numeric
+	 * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
+	 * to 0x7 (index starts at one)
+	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
+	 * val = 0x4 really means "bit 2, index starts at bit 0"
+	 */
+	val = clk_readl(mux->reg) >> mux->shift;
+	val &= mux->mask;
+
+	return clk_mux_get_parent(hw, val, mux->table, mux->flags);
+}
 
-	else {
-		if (mux->flags & CLK_MUX_INDEX_BIT)
-			index = (1 << ffs(index));
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+			     unsigned long flags)
+{
+	unsigned int val = index;
 
-		if (mux->flags & CLK_MUX_INDEX_ONE)
-			index++;
+	if (table) {
+		val = table[val];
+	} else {
+		if (flags & CLK_MUX_INDEX_BIT)
+			val = (1 << ffs(val));
+
+		if (flags & CLK_MUX_INDEX_ONE)
+			val++;
 	}
 
+	return val;
+}
+EXPORT_SYMBOL_GPL(clk_mux_reindex);
+
+static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_mux *mux = to_clk_mux(hw);
+	u32 val;
+	unsigned long flags = 0;
+
+	index = clk_mux_reindex(index, mux->table, mux->flags);
+
 	if (mux->lock)
 		spin_lock_irqsave(mux->lock, flags);
 
@@ -102,21 +120,21 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 }
 
 const struct clk_ops clk_mux_ops = {
-	.get_parent = clk_mux_get_parent,
+	.get_parent = _clk_mux_get_parent,
 	.set_parent = clk_mux_set_parent,
 	.determine_rate = __clk_mux_determine_rate,
 };
 EXPORT_SYMBOL_GPL(clk_mux_ops);
 
 const struct clk_ops clk_mux_ro_ops = {
-	.get_parent = clk_mux_get_parent,
+	.get_parent = _clk_mux_get_parent,
 };
 EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
 
 struct clk *clk_register_mux_table(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u32 mask,
-		u8 clk_mux_flags, u32 *table, spinlock_t *lock)
+		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
 {
 	struct clk_mux *mux;
 	struct clk *clk;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index f0744b8de50a..48a92e318542 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -376,7 +376,7 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
 struct clk_mux {
 	struct clk_hw	hw;
 	void __iomem	*reg;
-	u32		*table;
+	unsigned int	*table;
 	u32		mask;
 	u8		shift;
 	u8		flags;
@@ -391,6 +391,11 @@ struct clk_mux {
 extern const struct clk_ops clk_mux_ops;
 extern const struct clk_ops clk_mux_ro_ops;
 
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+				unsigned int *table, unsigned long flags);
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+			     unsigned long flags);
+
 struct clk *clk_register_mux(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
@@ -399,7 +404,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 struct clk *clk_register_mux_table(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u32 mask,
-		u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
 
 void clk_unregister_mux(struct clk *clk);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 02/15] clk: mux: Split out register accessors for reuse
Date: Fri,  5 Sep 2014 15:47:21 -0700	[thread overview]
Message-ID: <1409957256-23729-3-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1409957256-23729-1-git-send-email-sboyd@codeaurora.org>

We want to reuse the logic in clk-mux.c for other clock drivers
that don't use readl as register accessors. Fortunately, there
really isn't much to the mux code besides the table indirection
and quirk flags if you assume any bit shifting and masking has
been done already. Pull that logic out into reusable functions
that operate on an optional table and some flags so that other
drivers can use the same logic.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-mux.c        | 76 +++++++++++++++++++++++++++-----------------
 include/linux/clk-provider.h |  9 ++++--
 2 files changed, 54 insertions(+), 31 deletions(-)

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index c0cf9db9effa..54217961ae8a 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -29,35 +29,24 @@
 
 #define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
 
-static u8 clk_mux_get_parent(struct clk_hw *hw)
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+				unsigned int *table, unsigned long flags)
 {
-	struct clk_mux *mux = to_clk_mux(hw);
 	int num_parents = __clk_get_num_parents(hw->clk);
-	u32 val;
 
-	/*
-	 * FIXME need a mux-specific flag to determine if val is bitwise or numeric
-	 * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
-	 * to 0x7 (index starts at one)
-	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
-	 * val = 0x4 really means "bit 2, index starts at bit 0"
-	 */
-	val = clk_readl(mux->reg) >> mux->shift;
-	val &= mux->mask;
-
-	if (mux->table) {
+	if (table) {
 		int i;
 
 		for (i = 0; i < num_parents; i++)
-			if (mux->table[i] == val)
+			if (table[i] == val)
 				return i;
 		return -EINVAL;
 	}
 
-	if (val && (mux->flags & CLK_MUX_INDEX_BIT))
+	if (val && (flags & CLK_MUX_INDEX_BIT))
 		val = ffs(val) - 1;
 
-	if (val && (mux->flags & CLK_MUX_INDEX_ONE))
+	if (val && (flags & CLK_MUX_INDEX_ONE))
 		val--;
 
 	if (val >= num_parents)
@@ -65,24 +54,53 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 
 	return val;
 }
+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
 
-static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+static u8 _clk_mux_get_parent(struct clk_hw *hw)
 {
 	struct clk_mux *mux = to_clk_mux(hw);
 	u32 val;
-	unsigned long flags = 0;
 
-	if (mux->table)
-		index = mux->table[index];
+	/*
+	 * FIXME need a mux-specific flag to determine if val is bitwise or numeric
+	 * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
+	 * to 0x7 (index starts at one)
+	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
+	 * val = 0x4 really means "bit 2, index starts at bit 0"
+	 */
+	val = clk_readl(mux->reg) >> mux->shift;
+	val &= mux->mask;
+
+	return clk_mux_get_parent(hw, val, mux->table, mux->flags);
+}
 
-	else {
-		if (mux->flags & CLK_MUX_INDEX_BIT)
-			index = (1 << ffs(index));
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+			     unsigned long flags)
+{
+	unsigned int val = index;
 
-		if (mux->flags & CLK_MUX_INDEX_ONE)
-			index++;
+	if (table) {
+		val = table[val];
+	} else {
+		if (flags & CLK_MUX_INDEX_BIT)
+			val = (1 << ffs(val));
+
+		if (flags & CLK_MUX_INDEX_ONE)
+			val++;
 	}
 
+	return val;
+}
+EXPORT_SYMBOL_GPL(clk_mux_reindex);
+
+static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_mux *mux = to_clk_mux(hw);
+	u32 val;
+	unsigned long flags = 0;
+
+	index = clk_mux_reindex(index, mux->table, mux->flags);
+
 	if (mux->lock)
 		spin_lock_irqsave(mux->lock, flags);
 
@@ -102,21 +120,21 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 }
 
 const struct clk_ops clk_mux_ops = {
-	.get_parent = clk_mux_get_parent,
+	.get_parent = _clk_mux_get_parent,
 	.set_parent = clk_mux_set_parent,
 	.determine_rate = __clk_mux_determine_rate,
 };
 EXPORT_SYMBOL_GPL(clk_mux_ops);
 
 const struct clk_ops clk_mux_ro_ops = {
-	.get_parent = clk_mux_get_parent,
+	.get_parent = _clk_mux_get_parent,
 };
 EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
 
 struct clk *clk_register_mux_table(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u32 mask,
-		u8 clk_mux_flags, u32 *table, spinlock_t *lock)
+		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
 {
 	struct clk_mux *mux;
 	struct clk *clk;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index f0744b8de50a..48a92e318542 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -376,7 +376,7 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
 struct clk_mux {
 	struct clk_hw	hw;
 	void __iomem	*reg;
-	u32		*table;
+	unsigned int	*table;
 	u32		mask;
 	u8		shift;
 	u8		flags;
@@ -391,6 +391,11 @@ struct clk_mux {
 extern const struct clk_ops clk_mux_ops;
 extern const struct clk_ops clk_mux_ro_ops;
 
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+				unsigned int *table, unsigned long flags);
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+			     unsigned long flags);
+
 struct clk *clk_register_mux(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
@@ -399,7 +404,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 struct clk *clk_register_mux_table(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u32 mask,
-		u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
 
 void clk_unregister_mux(struct clk *clk);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2014-09-05 22:47 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-05 22:47 [PATCH v2 00/15] Krait clocks + Krait CPUfreq Stephen Boyd
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 01/15] clk: mux: Add unregistration API Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` Stephen Boyd [this message]
2014-09-05 22:47   ` [PATCH v2 02/15] clk: mux: Split out register accessors for reuse Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 03/15] clk: Add __clk_mux_determine_rate_closest Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-10-03 18:07   ` Stephen Boyd
2014-10-03 18:07     ` Stephen Boyd
2014-10-07 17:27     ` Srinivas Kandagatla
2014-10-07 17:27       ` Srinivas Kandagatla
2014-10-07 18:26       ` Stephen Boyd
2014-10-07 18:26         ` Stephen Boyd
2014-10-07 19:28         ` Srinivas Kandagatla
2014-10-07 19:28           ` Srinivas Kandagatla
2014-10-08 15:04         ` Srinivas Kandagatla
2014-10-08 15:04           ` Srinivas Kandagatla
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 05/15] clk: Add safe switch hook Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 06/15] clk: Avoid sending high rates to downstream clocks during set_rate Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 07/15] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 08/15] clk: qcom: Add HFPLL driver Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 09/15] clk: qcom: Add MSM8960/APQ8064's HFPLLs Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 10/15] clk: qcom: Add IPQ806X's HFPLLs Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 11/15] clk: qcom: Add support for Krait clocks Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 12/15] clk: qcom: Add KPSS ACC/GCC driver Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 13/15] clk: qcom: Add Krait clock controller driver Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 14/15] cpufreq: Add module to register cpufreq on Krait CPUs Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-08  4:46   ` Viresh Kumar
2014-09-08  4:46     ` Viresh Kumar
2014-09-08  4:46     ` Viresh Kumar
2014-09-08 17:15     ` Christopher Covington
2014-09-08 17:15       ` Christopher Covington
2014-09-08 17:15       ` Christopher Covington
2014-09-09  0:37     ` Stephen Boyd
2014-09-09  0:37       ` Stephen Boyd
2014-09-09  0:37       ` Stephen Boyd
2014-09-09  4:53       ` Viresh Kumar
2014-09-09  4:53         ` Viresh Kumar
2014-09-09  4:53         ` Viresh Kumar
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 15/15] ARM: dts: qcom: Add necessary DT data for Krait cpufreq Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-08  9:42 ` [PATCH v2 00/15] Krait clocks + Krait CPUfreq Pramod Gurav
2014-09-08  9:42   ` Pramod Gurav
2014-09-08  9:42   ` Pramod Gurav
2014-09-08 11:59   ` Pramod Gurav
2014-09-08 11:59     ` Pramod Gurav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409957256-23729-3-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.