[PATCH v2 9/9] ARM: shmobile: koelsch: Add DU HDMI output support

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-sh@vger.kernel.org
Subject: [PATCH v2 9/9] ARM: shmobile: koelsch: Add DU HDMI output support
Date: Fri, 24 Oct 2014 12:58:15 +0000	[thread overview]
Message-ID: <1414155495-3979-10-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1414155495-3979-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

Add DT nodes for the ADV7511 HDMI encoder and its HDMI output connector
and configure the DISP pin group that drives the HDMI transmitter DE
pin.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 50 ++++++++++++++++++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 0402c498b05b..317f5788a00c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -210,6 +210,17 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
 };
 
 &du {
@@ -218,6 +229,11 @@
 	status = "okay";
 
 	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
 		port@1 {
 			lvds_connector: endpoint {
 			};
@@ -236,7 +252,7 @@
 	};
 
 	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
+		renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0";
 		renesas,function = "du";
 	};
 
@@ -440,6 +456,38 @@
 		};
 	};
 
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
 	eeprom@50 {
 		compatible = "renesas,24c02";
 		reg = <0x50>;
-- 
2.0.4

