From: Chen-Yu Tsai <wens@csie.org> To: Maxime Ripard <maxime.ripard@free-electrons.com>, Dmitry Torokhov <dmitry.torokhov@gmail.com>, Zhang Rui <rui.zhang@intel.com>, Eduardo Valentin <edubezval@gmail.com> Cc: Chen-Yu Tsai <wens@csie.org>, Hans de Goede <hdegoede@redhat.com>, linux-input@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org Subject: [PATCH v3 2/9] ARM: dts: sunxi: Add dtsi for AXP209 PMIC Date: Mon, 12 Jan 2015 12:34:02 +0800 [thread overview] Message-ID: <1421037249-28461-3-git-send-email-wens@csie.org> (raw) In-Reply-To: <1421037249-28461-1-git-send-email-wens@csie.org> The AXP209 PMIC is used with some Allwinner SoCs. This patch adds a dtsi file listing all the regulator nodes. The regulators are initialized based on their device node names. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- changes since v2: none changes since v1: - Moved interrupt controller properties to this patch - Added default names for all the regulators - Removed needless comment above regulators section --- arch/arm/boot/dts/axp209.dtsi | 97 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 arch/arm/boot/dts/axp209.dtsi diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi new file mode 100644 index 000000000000..c20cf537f5a5 --- /dev/null +++ b/arch/arm/boot/dts/axp209.dtsi @@ -0,0 +1,97 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP202/209 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP20X.php + * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf + */ + +&axp209 { + compatible = "x-powers,axp209"; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-name = "dcdc2"; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "dcdc3"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "ldo1"; + }; + + reg_ldo2: ldo2 { + regulator-name = "ldo2"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; +}; -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 2/9] ARM: dts: sunxi: Add dtsi for AXP209 PMIC Date: Mon, 12 Jan 2015 12:34:02 +0800 [thread overview] Message-ID: <1421037249-28461-3-git-send-email-wens@csie.org> (raw) In-Reply-To: <1421037249-28461-1-git-send-email-wens@csie.org> The AXP209 PMIC is used with some Allwinner SoCs. This patch adds a dtsi file listing all the regulator nodes. The regulators are initialized based on their device node names. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- changes since v2: none changes since v1: - Moved interrupt controller properties to this patch - Added default names for all the regulators - Removed needless comment above regulators section --- arch/arm/boot/dts/axp209.dtsi | 97 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 arch/arm/boot/dts/axp209.dtsi diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi new file mode 100644 index 000000000000..c20cf537f5a5 --- /dev/null +++ b/arch/arm/boot/dts/axp209.dtsi @@ -0,0 +1,97 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP202/209 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP20X.php + * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf + */ + +&axp209 { + compatible = "x-powers,axp209"; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-name = "dcdc2"; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "dcdc3"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "ldo1"; + }; + + reg_ldo2: ldo2 { + regulator-name = "ldo2"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; +}; -- 2.1.4
next prev parent reply other threads:[~2015-01-12 4:34 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-12 4:34 [PATCH v3 0/9] ARM: sunxi: Support cpufreq on sun[457]i Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 1/9] Input: sun4i-ts: Add thermal zone sensor support Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 12:08 ` Eduardo Valentin 2015-01-12 12:08 ` Eduardo Valentin 2015-01-12 4:34 ` Chen-Yu Tsai [this message] 2015-01-12 4:34 ` [PATCH v3 2/9] ARM: dts: sunxi: Add dtsi for AXP209 PMIC Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 3/9] ARM: dts: sun7i: Add cpu thermal zones to dtsi Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 4/9] ARM: dts: sun7i: cubieboard2: add axp209 regulator nodes Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 9:06 ` Maxime Ripard 2015-01-12 9:06 ` Maxime Ripard 2015-01-12 9:38 ` Chen-Yu Tsai 2015-01-12 9:38 ` Chen-Yu Tsai 2015-01-13 9:40 ` Maxime Ripard 2015-01-13 9:40 ` Maxime Ripard 2015-01-13 10:30 ` Chen-Yu Tsai 2015-01-13 10:30 ` Chen-Yu Tsai 2015-01-14 19:30 ` Maxime Ripard 2015-01-14 19:30 ` Maxime Ripard 2015-01-12 4:34 ` [PATCH v3 5/9] ARM: dts: sun7i: cubietruck: " Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 6/9] ARM: dts: sun5i: Add cpu thermal zones to dtsi Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 7/9] ARM: dts: sun5i: hsg-h702: add axp209 regulator nodes Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 8/9] ARM: dts: sun4i: Add cpu thermal zones to dtsi Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 9/9] ARM: dts: sun4i: cubieboard: add axp209 regulator nodes Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 9:10 ` [PATCH v3 0/9] ARM: sunxi: Support cpufreq on sun[457]i Maxime Ripard 2015-01-12 9:10 ` Maxime Ripard 2015-01-13 13:53 ` Maxime Ripard 2015-01-13 13:53 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1421037249-28461-3-git-send-email-wens@csie.org \ --to=wens@csie.org \ --cc=dmitry.torokhov@gmail.com \ --cc=edubezval@gmail.com \ --cc=hdegoede@redhat.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-input@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=maxime.ripard@free-electrons.com \ --cc=rui.zhang@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.