From: Chen-Yu Tsai <wens@csie.org> To: Maxime Ripard <maxime.ripard@free-electrons.com>, Dmitry Torokhov <dmitry.torokhov@gmail.com>, Zhang Rui <rui.zhang@intel.com>, Eduardo Valentin <edubezval@gmail.com> Cc: Chen-Yu Tsai <wens@csie.org>, Hans de Goede <hdegoede@redhat.com>, linux-input@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org Subject: [PATCH v3 6/9] ARM: dts: sun5i: Add cpu thermal zones to dtsi Date: Mon, 12 Jan 2015 12:34:06 +0800 [thread overview] Message-ID: <1421037249-28461-7-git-send-email-wens@csie.org> (raw) In-Reply-To: <1421037249-28461-1-git-send-email-wens@csie.org> The core temperature sensor now supports thermal zones. Add a thermal zone mapping for the cpus with passive cooling (cpufreq throttling). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> --- changes since v2: - Added Acked-by from Eduardo changes since v1: - Use thermal dt bindings macros in cooling-device --- arch/arm/boot/dts/sun5i-a13.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index dee2aa5bc9ed..c26f58ea0850 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -13,6 +13,8 @@ #include "skeleton.dtsi" +#include <dt-bindings/thermal/thermal.h> + #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -50,6 +52,38 @@ }; }; + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <850000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + memory { reg = <0x40000000 0x20000000>; }; -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 6/9] ARM: dts: sun5i: Add cpu thermal zones to dtsi Date: Mon, 12 Jan 2015 12:34:06 +0800 [thread overview] Message-ID: <1421037249-28461-7-git-send-email-wens@csie.org> (raw) In-Reply-To: <1421037249-28461-1-git-send-email-wens@csie.org> The core temperature sensor now supports thermal zones. Add a thermal zone mapping for the cpus with passive cooling (cpufreq throttling). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> --- changes since v2: - Added Acked-by from Eduardo changes since v1: - Use thermal dt bindings macros in cooling-device --- arch/arm/boot/dts/sun5i-a13.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index dee2aa5bc9ed..c26f58ea0850 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -13,6 +13,8 @@ #include "skeleton.dtsi" +#include <dt-bindings/thermal/thermal.h> + #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -50,6 +52,38 @@ }; }; + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <850000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + memory { reg = <0x40000000 0x20000000>; }; -- 2.1.4
next prev parent reply other threads:[~2015-01-12 4:34 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-12 4:34 [PATCH v3 0/9] ARM: sunxi: Support cpufreq on sun[457]i Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 1/9] Input: sun4i-ts: Add thermal zone sensor support Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 12:08 ` Eduardo Valentin 2015-01-12 12:08 ` Eduardo Valentin 2015-01-12 4:34 ` [PATCH v3 2/9] ARM: dts: sunxi: Add dtsi for AXP209 PMIC Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 3/9] ARM: dts: sun7i: Add cpu thermal zones to dtsi Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 4/9] ARM: dts: sun7i: cubieboard2: add axp209 regulator nodes Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 9:06 ` Maxime Ripard 2015-01-12 9:06 ` Maxime Ripard 2015-01-12 9:38 ` Chen-Yu Tsai 2015-01-12 9:38 ` Chen-Yu Tsai 2015-01-13 9:40 ` Maxime Ripard 2015-01-13 9:40 ` Maxime Ripard 2015-01-13 10:30 ` Chen-Yu Tsai 2015-01-13 10:30 ` Chen-Yu Tsai 2015-01-14 19:30 ` Maxime Ripard 2015-01-14 19:30 ` Maxime Ripard 2015-01-12 4:34 ` [PATCH v3 5/9] ARM: dts: sun7i: cubietruck: " Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai [this message] 2015-01-12 4:34 ` [PATCH v3 6/9] ARM: dts: sun5i: Add cpu thermal zones to dtsi Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 7/9] ARM: dts: sun5i: hsg-h702: add axp209 regulator nodes Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 8/9] ARM: dts: sun4i: Add cpu thermal zones to dtsi Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 4:34 ` [PATCH v3 9/9] ARM: dts: sun4i: cubieboard: add axp209 regulator nodes Chen-Yu Tsai 2015-01-12 4:34 ` Chen-Yu Tsai 2015-01-12 9:10 ` [PATCH v3 0/9] ARM: sunxi: Support cpufreq on sun[457]i Maxime Ripard 2015-01-12 9:10 ` Maxime Ripard 2015-01-13 13:53 ` Maxime Ripard 2015-01-13 13:53 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1421037249-28461-7-git-send-email-wens@csie.org \ --to=wens@csie.org \ --cc=dmitry.torokhov@gmail.com \ --cc=edubezval@gmail.com \ --cc=hdegoede@redhat.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-input@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=maxime.ripard@free-electrons.com \ --cc=rui.zhang@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.