From: Namjae Jeon <linkinjeon@gmail.com> To: david@fromorbit.com, tytso@mit.edu Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org, linux-ext4@vger.kernel.org, xfs@oss.sgi.com, a.sangwan@samsung.com, bfoster@redhat.com, Namjae Jeon <linkinjeon@gmail.com>, Namjae Jeon <namjae.jeon@samsung.com> Subject: [PATCH v9 9/11] xfstests: generic/043: Test multiple fallocate insert/collapse range calls Date: Thu, 22 Jan 2015 00:12:04 +0900 [thread overview] Message-ID: <1421853126-4505-10-git-send-email-linkinjeon@gmail.com> (raw) In-Reply-To: <1421853126-4505-1-git-send-email-linkinjeon@gmail.com> From: Namjae Jeon <namjae.jeon@samsung.com> This testcase(043) tries to test finsert range a single alternate block multiple times and test merge code of collase range. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Reviewed-by: Brian Foster <bfoster@redhat.com> --- Changelog v9: - check that mkfs and mount succeed. - check extent_before and extent_after instead of hardcode 1. - remove umount. v8: - use MKFS_OPTION to use blocksize in configuration and remove loop. - remove trailing space. - compare original file and test file to check data integrity. tests/generic/043 | 96 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/043.out | 2 ++ tests/generic/group | 1 + 3 files changed, 99 insertions(+) create mode 100644 tests/generic/043 create mode 100644 tests/generic/043.out diff --git a/tests/generic/043 b/tests/generic/043 new file mode 100644 index 0000000..a6f91ce --- /dev/null +++ b/tests/generic/043 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. generic/043 +# +# Test multiple fallocate insert/collapse range calls on same file. +# Call insert range a single alternate block multiple times until the file +# is left with 100 extents and as much number of extents. And Call collapse +# range about the previously inserted ranges to test merge code of collapse +# range. Also check for data integrity and file system consistency. +#----------------------------------------------------------------------- +# Copyright (c) 2014 Samsung Electronics. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux + +_require_scratch +_require_xfs_io_command "fiemap" +_require_xfs_io_command "finsert" +_require_xfs_io_command "fcollapse" +_do_die_on_error=always +src=$SCRATCH_MNT/testfile +dest=$SCRATCH_MNT/testfile.dest +BLOCKS=100 +BSIZE=`get_block_size $SCRATCH_MNT` +rm -f $seqres.full + +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" +_scratch_mount || _fail "mount failed" +length=$(($BLOCKS * $BSIZE)) + +# Write file +_do "$XFS_IO_PROG -f -c \"pwrite 0 $length\" -c fsync $src" +cp $src $dest +extent_before=`$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l` + +# Insert alternate blocks +for (( j=0; j < $(($BLOCKS/2)); j++ )); do + offset=$((($j*$BSIZE)*2)) + _do "$XFS_IO_PROG -c \"finsert $offset $BSIZE\" $dest" +done + +# Check if 100 extents are present +$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l + +_check_scratch_fs +if [ $? -ne 0 ]; then + status=1 + exit +fi + +# Collapse alternate blocks +for (( j=0; j < $(($BLOCKS/2)); j++ )); do + offset=$((($j*$BSIZE))) + _do "$XFS_IO_PROG -c \"fcollapse $offset $BSIZE\" $dest" +done + +extent_after=`$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l` +if [ $extent_before -ne $extent_after ]; then + echo "extents mismatched before = $extent_before after = $extent_after" +fi + +# compare original file and test file. +cmp $src $dest || _fail "file bytes check failed" + +# success, all done +status=0 +exit diff --git a/tests/generic/043.out b/tests/generic/043.out new file mode 100644 index 0000000..28427c5 --- /dev/null +++ b/tests/generic/043.out @@ -0,0 +1,2 @@ +QA output created by 043 +100 diff --git a/tests/generic/group b/tests/generic/group index c0944b3..0a10bdd 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -45,6 +45,7 @@ 040 auto quick prealloc 041 auto quick prealloc 042 auto quick prealloc +043 auto quick prealloc 053 acl repair auto quick 062 attr udf auto quick 068 other auto freeze dangerous stress -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Namjae Jeon <linkinjeon@gmail.com> To: david@fromorbit.com, tytso@mit.edu Cc: Namjae Jeon <linkinjeon@gmail.com>, Namjae Jeon <namjae.jeon@samsung.com>, bfoster@redhat.com, linux-kernel@vger.kernel.org, xfs@oss.sgi.com, a.sangwan@samsung.com, linux-fsdevel@vger.kernel.org, linux-ext4@vger.kernel.org Subject: [PATCH v9 9/11] xfstests: generic/043: Test multiple fallocate insert/collapse range calls Date: Thu, 22 Jan 2015 00:12:04 +0900 [thread overview] Message-ID: <1421853126-4505-10-git-send-email-linkinjeon@gmail.com> (raw) In-Reply-To: <1421853126-4505-1-git-send-email-linkinjeon@gmail.com> From: Namjae Jeon <namjae.jeon@samsung.com> This testcase(043) tries to test finsert range a single alternate block multiple times and test merge code of collase range. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Reviewed-by: Brian Foster <bfoster@redhat.com> --- Changelog v9: - check that mkfs and mount succeed. - check extent_before and extent_after instead of hardcode 1. - remove umount. v8: - use MKFS_OPTION to use blocksize in configuration and remove loop. - remove trailing space. - compare original file and test file to check data integrity. tests/generic/043 | 96 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/043.out | 2 ++ tests/generic/group | 1 + 3 files changed, 99 insertions(+) create mode 100644 tests/generic/043 create mode 100644 tests/generic/043.out diff --git a/tests/generic/043 b/tests/generic/043 new file mode 100644 index 0000000..a6f91ce --- /dev/null +++ b/tests/generic/043 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. generic/043 +# +# Test multiple fallocate insert/collapse range calls on same file. +# Call insert range a single alternate block multiple times until the file +# is left with 100 extents and as much number of extents. And Call collapse +# range about the previously inserted ranges to test merge code of collapse +# range. Also check for data integrity and file system consistency. +#----------------------------------------------------------------------- +# Copyright (c) 2014 Samsung Electronics. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux + +_require_scratch +_require_xfs_io_command "fiemap" +_require_xfs_io_command "finsert" +_require_xfs_io_command "fcollapse" +_do_die_on_error=always +src=$SCRATCH_MNT/testfile +dest=$SCRATCH_MNT/testfile.dest +BLOCKS=100 +BSIZE=`get_block_size $SCRATCH_MNT` +rm -f $seqres.full + +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" +_scratch_mount || _fail "mount failed" +length=$(($BLOCKS * $BSIZE)) + +# Write file +_do "$XFS_IO_PROG -f -c \"pwrite 0 $length\" -c fsync $src" +cp $src $dest +extent_before=`$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l` + +# Insert alternate blocks +for (( j=0; j < $(($BLOCKS/2)); j++ )); do + offset=$((($j*$BSIZE)*2)) + _do "$XFS_IO_PROG -c \"finsert $offset $BSIZE\" $dest" +done + +# Check if 100 extents are present +$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l + +_check_scratch_fs +if [ $? -ne 0 ]; then + status=1 + exit +fi + +# Collapse alternate blocks +for (( j=0; j < $(($BLOCKS/2)); j++ )); do + offset=$((($j*$BSIZE))) + _do "$XFS_IO_PROG -c \"fcollapse $offset $BSIZE\" $dest" +done + +extent_after=`$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l` +if [ $extent_before -ne $extent_after ]; then + echo "extents mismatched before = $extent_before after = $extent_after" +fi + +# compare original file and test file. +cmp $src $dest || _fail "file bytes check failed" + +# success, all done +status=0 +exit diff --git a/tests/generic/043.out b/tests/generic/043.out new file mode 100644 index 0000000..28427c5 --- /dev/null +++ b/tests/generic/043.out @@ -0,0 +1,2 @@ +QA output created by 043 +100 diff --git a/tests/generic/group b/tests/generic/group index c0944b3..0a10bdd 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -45,6 +45,7 @@ 040 auto quick prealloc 041 auto quick prealloc 042 auto quick prealloc +043 auto quick prealloc 053 acl repair auto quick 062 attr udf auto quick 068 other auto freeze dangerous stress -- 1.7.9.5 _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2015-01-21 15:15 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-21 15:11 [PATCH v9 0/11] fs: Introduce FALLOC_FL_INSERT_RANGE for fallocate Namjae Jeon 2015-01-21 15:11 ` Namjae Jeon 2015-01-21 15:11 ` [PATCH v9 1/11] fs: Add support " Namjae Jeon 2015-01-21 15:11 ` Namjae Jeon 2015-01-21 15:11 ` [PATCH v9 2/11] xfs: " Namjae Jeon 2015-01-21 15:11 ` Namjae Jeon 2015-01-21 15:11 ` [PATCH v9 3/11] ext4: " Namjae Jeon 2015-01-21 15:11 ` Namjae Jeon 2015-01-21 15:11 ` [PATCH v9 4/11] xfsprogs: xfs_io: add finsert command for insert range Namjae Jeon 2015-01-21 15:11 ` Namjae Jeon 2015-02-05 23:40 ` Dave Chinner 2015-02-05 23:40 ` Dave Chinner 2015-02-06 3:11 ` Dave Chinner 2015-02-06 3:11 ` Dave Chinner 2015-02-06 4:27 ` Namjae Jeon 2015-02-06 4:27 ` Namjae Jeon 2015-01-21 15:12 ` [PATCH v9 5/11] xfstests: generic/039: Standard insert range tests Namjae Jeon 2015-01-21 15:12 ` Namjae Jeon 2015-01-21 15:12 ` [PATCH v9 6/11] xfstests: generic/040: Delayed allocation insert range Namjae Jeon 2015-01-21 15:12 ` Namjae Jeon 2015-01-21 15:12 ` [PATCH v9 7/11] xfstests: generic/041: Multi insert range tests Namjae Jeon 2015-01-21 15:12 ` Namjae Jeon 2015-01-21 15:12 ` [PATCH v9 8/11] xfstests: generic/042: Delayed allocation multi insert Namjae Jeon 2015-01-21 15:12 ` Namjae Jeon 2015-01-21 15:12 ` Namjae Jeon [this message] 2015-01-21 15:12 ` [PATCH v9 9/11] xfstests: generic/043: Test multiple fallocate insert/collapse range calls Namjae Jeon 2015-01-21 15:12 ` [PATCH v9 10/11] xfstests: fsstress: Add fallocate insert range operation Namjae Jeon 2015-01-21 15:12 ` Namjae Jeon 2015-01-21 15:12 ` [PATCH v9 11/11] xfstests: fsx: " Namjae Jeon 2015-01-21 15:12 ` Namjae Jeon 2015-01-22 8:16 ` [PATCH v9 0/11] fs: Introduce FALLOC_FL_INSERT_RANGE for fallocate Michael Kerrisk 2015-01-22 8:16 ` Michael Kerrisk 2015-01-22 8:52 ` Namjae Jeon 2015-01-22 8:52 ` Namjae Jeon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1421853126-4505-10-git-send-email-linkinjeon@gmail.com \ --to=linkinjeon@gmail.com \ --cc=a.sangwan@samsung.com \ --cc=bfoster@redhat.com \ --cc=david@fromorbit.com \ --cc=linux-ext4@vger.kernel.org \ --cc=linux-fsdevel@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=namjae.jeon@samsung.com \ --cc=tytso@mit.edu \ --cc=xfs@oss.sgi.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.