From: Lukasz Majewski <l.majewski@samsung.com>
To: Eduardo Valentin <edubezval@gmail.com>,
Kamil Debski <k.debski@samsung.com>,
Jean Delvare <jdelvare@suse.de>,
Guenter Roeck <linux@roeck-us.net>, Kukjin Kim <kgene@kernel.org>
Cc: lm-sensors@lm-sensors.org,
Linux PM list <linux-pm@vger.kernel.org>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
devicetree@vger.kernel.org,
Lukasz Majewski <l.majewski@majess.pl>,
Kukjin Kim <kgene.kim@samsung.com>,
linux-kernel@vger.kernel.org,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Abhilash Kesavan <kesavan.abhilash@gmail.com>,
Abhilash Kesavan <a.kesavan@samsung.com>,
Lukasz Majewski <l.majewski@samsung.com>
Subject: [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
Date: Wed, 25 Feb 2015 16:34:16 +0100 [thread overview]
Message-ID: <1424878462-15511-1-git-send-email-l.majewski@samsung.com> (raw)
In-Reply-To: <1418897591-18332-1-git-send-email-l.majewski@samsung.com>
Presented patches add support for Odroid's U3 optional CPU FAN, which uses PWM
subsystem for low level control.
After successful probe it registers itself as a cooling device for thermal
subsystem.
This driver also supports devices without DTS specified.
To provide correct functionality, new properties to device tree description for
Exynos4412 and in particular Odroid U3 have been added.
Those patches were tested at Exynos4412 - Odroid U3 board.
Patches were applied on:
linux-soc-thermal/fixes branch (Linux v4.0-rc1)
SHA1: b71d399c7f2fe06b60b96155ec0b9ae167334e4a
Kamil Debski (1):
ARM: dts: Add pwm-fan node to the Odroid-U3 board
Lukasz Majewski (5):
Documentation: dts: Documentation entry to explain how to use PWM FAN
as a cooling device
ARM: dts: Add properties to use pwm-fan device as a cooling device in
Odroid U3
hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty
cycle
hwmon: pwm-fan: Read PWM FAN configuration from device tree
hwmon: pwm-fan: Code for using PWM FAN as a cooling device
.../devicetree/bindings/hwmon/pwm-fan.txt | 25 +++-
arch/arm/boot/dts/exynos4.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-odroidu3.dts | 43 ++++++
drivers/hwmon/pwm-fan.c | 166 +++++++++++++++++++--
4 files changed, 220 insertions(+), 16 deletions(-)
--
2.0.0.rc2
WARNING: multiple messages have this Message-ID (diff)
From: Lukasz Majewski <l.majewski@samsung.com>
To: Eduardo Valentin <edubezval@gmail.com>,
Kamil Debski <k.debski@samsung.com>,
Jean Delvare <jdelvare@suse.de>,
Guenter Roeck <linux@roeck-us.net>, Kukjin Kim <kgene@kernel.org>
Cc: lm-sensors@lm-sensors.org,
Linux PM list <linux-pm@vger.kernel.org>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
devicetree@vger.kernel.org,
Lukasz Majewski <l.majewski@majess.pl>,
Kukjin Kim <kgene.kim@samsung.com>,
linux-kernel@vger.kernel.org,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Abhilash Kesavan <kesavan.abhilash@gmail.com>,
Abhilash Kesavan <a.kesavan@samsung.com>,
Lukasz Majewski <l.majewski@samsung.com>
Subject: [lm-sensors] [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
Date: Wed, 25 Feb 2015 15:34:16 +0000 [thread overview]
Message-ID: <1424878462-15511-1-git-send-email-l.majewski@samsung.com> (raw)
In-Reply-To: <1418897591-18332-1-git-send-email-l.majewski@samsung.com>
Presented patches add support for Odroid's U3 optional CPU FAN, which uses PWM
subsystem for low level control.
After successful probe it registers itself as a cooling device for thermal
subsystem.
This driver also supports devices without DTS specified.
To provide correct functionality, new properties to device tree description for
Exynos4412 and in particular Odroid U3 have been added.
Those patches were tested at Exynos4412 - Odroid U3 board.
Patches were applied on:
linux-soc-thermal/fixes branch (Linux v4.0-rc1)
SHA1: b71d399c7f2fe06b60b96155ec0b9ae167334e4a
Kamil Debski (1):
ARM: dts: Add pwm-fan node to the Odroid-U3 board
Lukasz Majewski (5):
Documentation: dts: Documentation entry to explain how to use PWM FAN
as a cooling device
ARM: dts: Add properties to use pwm-fan device as a cooling device in
Odroid U3
hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty
cycle
hwmon: pwm-fan: Read PWM FAN configuration from device tree
hwmon: pwm-fan: Code for using PWM FAN as a cooling device
.../devicetree/bindings/hwmon/pwm-fan.txt | 25 +++-
arch/arm/boot/dts/exynos4.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-odroidu3.dts | 43 ++++++
drivers/hwmon/pwm-fan.c | 166 +++++++++++++++++++--
4 files changed, 220 insertions(+), 16 deletions(-)
--
2.0.0.rc2
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2015-02-25 15:34 UTC|newest]
Thread overview: 329+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-18 10:13 [PATCH 0/9] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 1/9] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling dev Lukasz Majewski
2014-12-18 10:13 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:42 ` Sjoerd Simons
2014-12-18 10:42 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Sjoerd Simons
2014-12-18 10:42 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Sjoerd Simons
2014-12-19 15:32 ` Lukasz Majewski
2014-12-19 15:32 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2014-12-19 15:32 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-19 16:02 ` Guenter Roeck
2014-12-19 16:02 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Guenter Roeck
2014-12-19 16:02 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Guenter Roeck
2014-12-19 16:13 ` Lukasz Majewski
2014-12-19 16:13 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2014-12-19 16:13 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-01-05 10:50 ` Sjoerd Simons
2015-01-05 10:50 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Sjoerd Simons
2015-01-05 10:50 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Sjoerd Simons
2015-01-14 13:56 ` Lukasz Majewski
2015-01-14 13:56 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2015-01-14 13:56 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-01-15 8:57 ` Sjoerd Simons
2015-01-15 8:57 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Sjoerd Simons
2015-01-15 8:57 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Sjoerd Simons
2014-12-18 14:27 ` Guenter Roeck
2014-12-18 14:27 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Guenter Roeck
2014-12-18 14:27 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Guenter Roeck
2014-12-19 16:25 ` Lukasz Majewski
2014-12-19 16:25 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2014-12-19 16:25 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:13 ` [PATCH 3/9] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 4/9] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] [PATCH 4/9] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling devi Lukasz Majewski
2014-12-18 10:13 ` [PATCH 4/9] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2014-12-18 10:13 ` [PATCH 5/9] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 6/9] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 7/9] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 8/9] hwmon: thermal: Provide 'default-pulse-width' property to setup FAN on boot Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 9/9] hwmon: thermal: dts: Disable FAN on boot on the Odroid U3 Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2014-12-22 16:27 ` Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2014-12-22 16:27 ` Lukasz Majewski
2015-01-02 18:54 ` Eduardo Valentin
2015-01-02 18:54 ` [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Eduardo Valentin
2015-01-02 18:54 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Eduardo Valentin
2015-01-02 19:03 ` Eduardo Valentin
2015-01-02 19:03 ` [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Eduardo Valentin
2015-01-02 19:03 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Eduardo Valentin
2015-01-14 15:01 ` Lukasz Majewski
2015-01-14 15:01 ` [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Lukasz Majewski
2015-01-14 15:01 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-01-14 18:32 ` Eduardo Valentin
2015-01-14 18:32 ` [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Eduardo Valentin
2015-01-14 18:32 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Eduardo Valentin
2015-01-15 8:43 ` Lukasz Majewski
2015-01-15 8:43 ` [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Lukasz Majewski
2015-01-15 8:43 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2014-12-22 16:27 ` Lukasz Majewski
2015-01-02 18:40 ` Eduardo Valentin
2015-01-02 18:40 ` [lm-sensors] " Eduardo Valentin
2015-01-02 18:40 ` Eduardo Valentin
2015-01-14 15:07 ` Lukasz Majewski
2015-01-14 15:07 ` [lm-sensors] " Lukasz Majewski
2015-01-14 15:07 ` Lukasz Majewski
2015-01-14 18:28 ` Eduardo Valentin
2015-01-14 18:28 ` [lm-sensors] " Eduardo Valentin
2015-01-14 18:28 ` Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-01-02 18:51 ` Eduardo Valentin
2015-01-02 18:51 ` [lm-sensors] [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cool Eduardo Valentin
2015-01-02 18:51 ` [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2014-12-22 16:27 ` Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling d Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-01-02 18:52 ` Eduardo Valentin
2015-01-02 18:52 ` [lm-sensors] [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooli Eduardo Valentin
2015-01-02 18:52 ` [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-29 12:52 ` Guenter Roeck
2014-12-29 12:52 ` [lm-sensors] [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty Guenter Roeck
2014-12-29 12:52 ` [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Guenter Roeck
2014-12-22 16:27 ` [PATCH v2 7/8] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2014-12-22 16:27 ` Lukasz Majewski
2014-12-29 12:50 ` Guenter Roeck
2014-12-29 12:50 ` [lm-sensors] " Guenter Roeck
2014-12-29 12:50 ` Guenter Roeck
2014-12-22 16:27 ` [PATCH v2 8/8] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2014-12-22 16:27 ` Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] [PATCH v3 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] [PATCH v3 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Od Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-06 18:27 ` Guenter Roeck
2015-02-06 18:27 ` [lm-sensors] [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty Guenter Roeck
2015-02-06 18:27 ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Guenter Roeck
2015-02-08 20:52 ` Lukasz Majewski
2015-02-08 20:52 ` [lm-sensors] [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty Lukasz Majewski
2015-02-08 20:52 ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` Lukasz Majewski
2015-02-06 18:36 ` Guenter Roeck
2015-02-06 18:36 ` [lm-sensors] " Guenter Roeck
2015-02-06 18:36 ` Guenter Roeck
2015-02-08 21:36 ` Lukasz Majewski
2015-02-08 21:36 ` [lm-sensors] " Lukasz Majewski
2015-02-08 21:36 ` Lukasz Majewski
2015-02-09 4:40 ` Guenter Roeck
2015-02-09 4:40 ` [lm-sensors] " Guenter Roeck
2015-02-09 4:40 ` Guenter Roeck
2015-02-06 16:59 ` [PATCH v3 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-18 10:07 ` Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-18 10:07 ` Lukasz Majewski
2015-02-24 19:21 ` Eduardo Valentin
2015-02-24 19:21 ` [lm-sensors] [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Eduardo Valentin
2015-02-24 19:21 ` [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Eduardo Valentin
2015-02-25 12:26 ` Lukasz Majewski
2015-02-25 12:26 ` [lm-sensors] [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Lukasz Majewski
2015-02-25 12:26 ` [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-18 10:07 ` Lukasz Majewski
2015-02-24 19:21 ` Eduardo Valentin
2015-02-24 19:21 ` [lm-sensors] " Eduardo Valentin
2015-02-24 19:21 ` Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-24 19:25 ` Eduardo Valentin
2015-02-24 19:25 ` [lm-sensors] [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FA Eduardo Valentin
2015-02-24 19:25 ` [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-18 10:07 ` Lukasz Majewski
2015-02-18 13:16 ` Andreas Färber
2015-02-18 13:16 ` [lm-sensors] " Andreas Färber
2015-02-18 13:16 ` Andreas Färber
2015-02-18 10:07 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Od Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-24 19:37 ` Eduardo Valentin
2015-02-24 19:37 ` [lm-sensors] [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device i Eduardo Valentin
2015-02-24 19:37 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Eduardo Valentin
2015-02-25 13:28 ` Lukasz Majewski
2015-02-25 13:28 ` [lm-sensors] [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device i Lukasz Majewski
2015-02-25 13:28 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-25 18:30 ` Eduardo Valentin
2015-02-25 18:30 ` [lm-sensors] [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device i Eduardo Valentin
2015-02-25 18:30 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] [PATCH v4 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-18 10:07 ` Lukasz Majewski
2015-02-21 0:26 ` Guenter Roeck
2015-02-21 0:26 ` [lm-sensors] " Guenter Roeck
2015-02-21 0:26 ` Guenter Roeck
2015-02-23 16:13 ` Lukasz Majewski
2015-02-23 16:13 ` [lm-sensors] " Lukasz Majewski
2015-02-23 16:13 ` Lukasz Majewski
2015-02-23 16:23 ` Guenter Roeck
2015-02-23 16:23 ` [lm-sensors] " Guenter Roeck
2015-02-23 16:23 ` Guenter Roeck
2015-02-23 16:51 ` Lukasz Majewski
2015-02-23 16:51 ` [lm-sensors] " Lukasz Majewski
2015-02-23 16:51 ` Lukasz Majewski
2015-02-23 16:59 ` Guenter Roeck
2015-02-23 16:59 ` [lm-sensors] " Guenter Roeck
2015-02-23 16:59 ` Guenter Roeck
2015-02-18 10:07 ` [PATCH v4 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-18 10:07 ` Lukasz Majewski
2015-02-25 15:34 ` Lukasz Majewski [this message]
2015-02-25 15:34 ` [lm-sensors] [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-25 15:34 ` Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-25 19:11 ` Eduardo Valentin
2015-02-25 19:11 ` [lm-sensors] [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FA Eduardo Valentin
2015-02-25 19:11 ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Eduardo Valentin
2015-02-25 19:13 ` Eduardo Valentin
2015-02-25 19:13 ` [lm-sensors] [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FA Eduardo Valentin
2015-02-25 19:13 ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Eduardo Valentin
2015-02-25 15:34 ` [PATCH v5 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] " Lukasz Majewski
2015-02-25 15:34 ` Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Od Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-25 18:49 ` Eduardo Valentin
2015-02-25 18:49 ` [lm-sensors] [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device i Eduardo Valentin
2015-02-25 18:49 ` [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Eduardo Valentin
2015-02-25 15:34 ` [PATCH v5 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] [PATCH v5 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] " Lukasz Majewski
2015-02-25 15:34 ` Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] " Lukasz Majewski
2015-02-25 15:34 ` Lukasz Majewski
2015-02-25 18:24 ` Eduardo Valentin
2015-02-25 18:24 ` [lm-sensors] " Eduardo Valentin
2015-02-25 18:24 ` Eduardo Valentin
2015-02-25 17:18 ` [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Guenter Roeck
2015-02-25 17:18 ` [lm-sensors] " Guenter Roeck
2015-02-25 17:18 ` Guenter Roeck
2015-02-25 18:29 ` Eduardo Valentin
2015-02-25 18:29 ` [lm-sensors] " Eduardo Valentin
2015-02-25 18:29 ` Eduardo Valentin
2015-02-25 18:42 ` Guenter Roeck
2015-02-25 18:42 ` [lm-sensors] " Guenter Roeck
2015-02-25 18:42 ` Guenter Roeck
2015-02-26 13:59 ` [PATCH v6 " Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] " Lukasz Majewski
2015-02-26 13:59 ` Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] [PATCH v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] " Lukasz Majewski
2015-02-26 13:59 ` Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] [PATCH v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Od Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] [PATCH v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] " Lukasz Majewski
2015-02-26 13:59 ` Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] " Lukasz Majewski
2015-02-26 13:59 ` Lukasz Majewski
2015-02-26 14:12 ` Guenter Roeck
2015-02-26 14:12 ` [lm-sensors] " Guenter Roeck
2015-02-26 14:12 ` Guenter Roeck
2015-02-26 14:40 ` Lukasz Majewski
2015-02-26 14:40 ` [lm-sensors] " Lukasz Majewski
2015-02-26 14:40 ` Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND RESEND v6 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] [PATCH RESEND RESEND v6 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 f Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND RESEND v6 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] [PATCH RESEND v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] " Lukasz Majewski
2015-03-04 12:03 ` Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] [PATCH RESEND v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling devic Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] [PATCH RESEND v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM d Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] " Lukasz Majewski
2015-03-04 12:03 ` Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] " Lukasz Majewski
2015-03-04 12:03 ` Lukasz Majewski
2015-08-11 13:07 ` [PATCH RESEND v6 0/3] dts: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-08-11 13:07 ` [PATCH RESEND v6 1/3] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-08-13 0:17 ` Krzysztof Kozlowski
2015-08-14 9:36 ` Kukjin Kim
2015-08-16 9:35 ` Krzysztof Kozlowski
2015-09-16 11:00 ` [PATCH RESEND v6 0/3] dts: thermal: Odroid U3: Provide support for Odroid U3 fan Thomas Pietrowski
2015-09-16 11:57 ` Krzysztof Kozlowski
2015-08-11 13:14 ` [PATCH RESEND v6 2/3] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-08-13 0:35 ` Krzysztof Kozlowski
2015-08-11 13:15 ` [PATCH RESEND v6 3/3] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-08-13 0:35 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424878462-15511-1-git-send-email-l.majewski@samsung.com \
--to=l.majewski@samsung.com \
--cc=a.kesavan@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=jdelvare@suse.de \
--cc=k.debski@samsung.com \
--cc=kesavan.abhilash@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=kgene@kernel.org \
--cc=l.majewski@majess.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=sjoerd.simons@collabora.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.