From: Roger Quadros <rogerq@ti.com> To: <stern@rowland.harvard.edu>, <balbi@ti.com>, <gregkh@linuxfoundation.org>, <peter.chen@freescale.com> Cc: <dan.j.williams@intel.com>, <jun.li@freescale.com>, <mathias.nyman@linux.intel.com>, <tony@atomide.com>, <Joao.Pinto@synopsys.com>, <abrestic@chromium.org>, <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>, Roger Quadros <rogerq@ti.com> Subject: [PATCH v4 09/13] usb: chipidea: move from CONFIG_USB_OTG_FSM to CONFIG_USB_OTG Date: Mon, 24 Aug 2015 16:21:20 +0300 [thread overview] Message-ID: <1440422484-4737-10-git-send-email-rogerq@ti.com> (raw) In-Reply-To: <1440422484-4737-1-git-send-email-rogerq@ti.com> CONFIG_USB_OTG_FSM no longer exists and the OTG FSM is available if CONFIG_USB_OTG is defined so move to using CONFIG_USB_OTG. Signed-off-by: Roger Quadros <rogerq@ti.com> --- Documentation/usb/chipidea.txt | 2 +- drivers/usb/chipidea/Makefile | 2 +- drivers/usb/chipidea/ci.h | 2 +- drivers/usb/chipidea/otg_fsm.h | 2 +- drivers/usb/phy/Kconfig | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 3f848c1..e7f97da 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -5,7 +5,7 @@ with 2 Freescale i.MX6Q sabre SD boards. 1.1 How to enable OTG FSM in menuconfig --------------------------------------- -Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules. +Select CONFIG_USB_OTG, rebuild kernel Image and modules. If you want to check some internal variables for otg fsm, select CONFIG_USB_CHIPIDEA_DEBUG, there are 2 files which can show otg fsm variables and some controller registers value: diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 4decb12..63f2394 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -6,7 +6,7 @@ ci_hdrc-y := core.o otg.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o -ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o +ci_hdrc-$(CONFIG_USB_OTG) += otg_fsm.o # Glue/Bridge layers go here diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 41d7cf6..438818c 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -407,7 +407,7 @@ static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg, */ static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci) { -#ifdef CONFIG_USB_OTG_FSM +#ifdef CONFIG_USB_OTG struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps; return ci->is_otg && ci->roles[CI_ROLE_HOST] && diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h index 2689375..fb66695 100644 --- a/drivers/usb/chipidea/otg_fsm.h +++ b/drivers/usb/chipidea/otg_fsm.h @@ -62,7 +62,7 @@ /* SSEND time before SRP */ #define TB_SSEND_SRP (1500) /* minimum 1.5 sec, section:5.1.2 */ -#ifdef CONFIG_USB_OTG_FSM +#ifdef CONFIG_USB_OTG int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci); int ci_otg_fsm_work(struct ci_hdrc *ci); diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 7d3beee..664cacb 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -20,7 +20,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM + depends on USB_EHCI_FSL && USB_FSL_USB2 && PM select USB_OTG select USB_PHY help -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org> To: stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org, balbi-l0cyMroinI0@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org Cc: dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org, jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org, mathias.nyman-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org, Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org, abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org> Subject: [PATCH v4 09/13] usb: chipidea: move from CONFIG_USB_OTG_FSM to CONFIG_USB_OTG Date: Mon, 24 Aug 2015 16:21:20 +0300 [thread overview] Message-ID: <1440422484-4737-10-git-send-email-rogerq@ti.com> (raw) In-Reply-To: <1440422484-4737-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org> CONFIG_USB_OTG_FSM no longer exists and the OTG FSM is available if CONFIG_USB_OTG is defined so move to using CONFIG_USB_OTG. Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org> --- Documentation/usb/chipidea.txt | 2 +- drivers/usb/chipidea/Makefile | 2 +- drivers/usb/chipidea/ci.h | 2 +- drivers/usb/chipidea/otg_fsm.h | 2 +- drivers/usb/phy/Kconfig | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 3f848c1..e7f97da 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -5,7 +5,7 @@ with 2 Freescale i.MX6Q sabre SD boards. 1.1 How to enable OTG FSM in menuconfig --------------------------------------- -Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules. +Select CONFIG_USB_OTG, rebuild kernel Image and modules. If you want to check some internal variables for otg fsm, select CONFIG_USB_CHIPIDEA_DEBUG, there are 2 files which can show otg fsm variables and some controller registers value: diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 4decb12..63f2394 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -6,7 +6,7 @@ ci_hdrc-y := core.o otg.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o -ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o +ci_hdrc-$(CONFIG_USB_OTG) += otg_fsm.o # Glue/Bridge layers go here diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 41d7cf6..438818c 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -407,7 +407,7 @@ static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg, */ static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci) { -#ifdef CONFIG_USB_OTG_FSM +#ifdef CONFIG_USB_OTG struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps; return ci->is_otg && ci->roles[CI_ROLE_HOST] && diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h index 2689375..fb66695 100644 --- a/drivers/usb/chipidea/otg_fsm.h +++ b/drivers/usb/chipidea/otg_fsm.h @@ -62,7 +62,7 @@ /* SSEND time before SRP */ #define TB_SSEND_SRP (1500) /* minimum 1.5 sec, section:5.1.2 */ -#ifdef CONFIG_USB_OTG_FSM +#ifdef CONFIG_USB_OTG int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci); int ci_otg_fsm_work(struct ci_hdrc *ci); diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 7d3beee..664cacb 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -20,7 +20,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM + depends on USB_EHCI_FSL && USB_FSL_USB2 && PM select USB_OTG select USB_PHY help -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-08-24 13:24 UTC|newest] Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-08-24 13:21 [PATCH v4 00/13] USB: OTG/DRD Core functionality Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 01/13] usb: otg-fsm: Add documentation for struct otg_fsm Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 02/13] usb: otg-fsm: support multiple instances Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-06 5:52 ` Peter Chen 2015-09-06 5:52 ` Peter Chen 2015-08-24 13:21 ` [PATCH v4 03/13] usb: otg-fsm: Prevent build warning "VDBG" redefined Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 04/13] otg-fsm: move usb_bus_start_enum into otg-fsm->ops Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-07 1:24 ` Peter Chen 2015-09-07 1:24 ` Peter Chen 2015-09-07 9:57 ` Roger Quadros 2015-09-07 9:57 ` Roger Quadros 2015-09-08 6:54 ` Peter Chen 2015-09-08 6:54 ` Peter Chen 2015-09-08 8:24 ` Roger Quadros 2015-09-08 8:24 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 05/13] usb: hcd.h: Add OTG to HCD interface Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 06/13] usb: gadget.h: Add OTG to gadget interface Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 07/13] usb: otg: add OTG core Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-07 1:23 ` Peter Chen 2015-09-07 1:23 ` Peter Chen 2015-09-07 10:23 ` Roger Quadros 2015-09-07 10:23 ` Roger Quadros 2015-09-08 8:31 ` Peter Chen 2015-09-08 8:31 ` Peter Chen 2015-09-08 12:25 ` Roger Quadros 2015-09-08 12:25 ` Roger Quadros 2015-09-08 14:34 ` Alan Stern 2015-09-08 14:34 ` Alan Stern 2015-09-08 17:29 ` Roger Quadros 2015-09-08 17:29 ` Roger Quadros 2015-09-09 2:21 ` Peter Chen 2015-09-09 2:21 ` Peter Chen 2015-09-09 9:08 ` Roger Quadros 2015-09-09 9:08 ` Roger Quadros 2015-09-09 8:13 ` Peter Chen 2015-09-09 8:13 ` Peter Chen 2015-09-09 9:33 ` Roger Quadros 2015-09-09 9:33 ` Roger Quadros 2015-09-09 8:45 ` Peter Chen 2015-09-09 8:45 ` Peter Chen 2015-09-09 10:21 ` Roger Quadros 2015-09-09 10:21 ` Roger Quadros 2015-09-10 5:35 ` Peter Chen 2015-09-10 5:35 ` Peter Chen 2015-09-10 14:17 ` Roger Quadros 2015-09-10 14:17 ` Roger Quadros 2015-09-11 1:50 ` Peter Chen 2015-09-11 1:50 ` Peter Chen 2015-09-07 7:40 ` Li Jun 2015-09-07 7:40 ` Li Jun 2015-09-07 10:53 ` Roger Quadros 2015-09-07 10:53 ` Roger Quadros 2015-09-09 6:20 ` Li Jun 2015-09-09 6:20 ` Li Jun 2015-09-09 10:01 ` Roger Quadros 2015-09-09 10:01 ` Roger Quadros 2015-09-10 9:28 ` Li Jun 2015-09-10 9:28 ` Li Jun 2015-09-10 14:14 ` Roger Quadros 2015-09-10 14:14 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 08/13] usb: doc: dt-binding: Add otg-controller property Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` Roger Quadros [this message] 2015-08-24 13:21 ` [PATCH v4 09/13] usb: chipidea: move from CONFIG_USB_OTG_FSM to CONFIG_USB_OTG Roger Quadros 2015-08-24 13:21 ` [PATCH v4 10/13] usb: hcd: Adapt to OTG core Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-09 2:23 ` Peter Chen 2015-09-09 2:23 ` Peter Chen 2015-09-09 9:39 ` Roger Quadros 2015-09-09 9:39 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 11/13] usb: core: hub: Notify OTG fsm when A device sets b_hnp_enable Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 12/13] usb: gadget: udc: adapt to OTG core Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 13/13] usb: otg: Add dual-role device (DRD) support Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-07 7:53 ` Li Jun 2015-09-07 7:53 ` Li Jun 2015-09-07 9:51 ` Roger Quadros 2015-09-07 9:51 ` Roger Quadros 2015-08-26 6:19 ` [PATCH v4 00/13] USB: OTG/DRD Core functionality Peter Chen 2015-08-26 6:19 ` Peter Chen 2015-09-06 7:06 ` Peter Chen 2015-09-06 7:06 ` Peter Chen 2015-09-07 11:42 ` Roger Quadros 2015-09-07 11:42 ` Roger Quadros 2015-12-03 8:19 ` Peter Chen 2015-12-03 8:19 ` Peter Chen 2015-12-03 8:54 ` Roger Quadros 2015-12-03 8:54 ` Roger Quadros
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1440422484-4737-10-git-send-email-rogerq@ti.com \ --to=rogerq@ti.com \ --cc=Joao.Pinto@synopsys.com \ --cc=abrestic@chromium.org \ --cc=balbi@ti.com \ --cc=dan.j.williams@intel.com \ --cc=gregkh@linuxfoundation.org \ --cc=jun.li@freescale.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mathias.nyman@linux.intel.com \ --cc=peter.chen@freescale.com \ --cc=stern@rowland.harvard.edu \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.