From: Roger Quadros <rogerq@ti.com> To: <stern@rowland.harvard.edu>, <balbi@ti.com>, <gregkh@linuxfoundation.org>, <peter.chen@freescale.com> Cc: <dan.j.williams@intel.com>, <jun.li@freescale.com>, <mathias.nyman@linux.intel.com>, <tony@atomide.com>, <Joao.Pinto@synopsys.com>, <abrestic@chromium.org>, <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>, Roger Quadros <rogerq@ti.com> Subject: [PATCH v4 08/13] usb: doc: dt-binding: Add otg-controller property Date: Mon, 24 Aug 2015 16:21:19 +0300 [thread overview] Message-ID: <1440422484-4737-9-git-send-email-rogerq@ti.com> (raw) In-Reply-To: <1440422484-4737-1-git-send-email-rogerq@ti.com> The otg-controller property is used to link the host/gadget controllers to the otg controller. otg-controller property must contain the phandle of the otg controller. The otg core uses this property to tie the host/gadget controllres to the correct otg controller. Signed-off-by: Roger Quadros <rogerq@ti.com> --- Documentation/devicetree/bindings/usb/generic.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index bba8257..5a457bc 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -24,6 +24,11 @@ Optional properties: optional for OTG device. - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is optional for OTG device. + - otg-controller: phandle to otg controller. Host or gadget controllers can + contain this property to link it to a particular otg + controller. If this property is not present then otg + core assumes that host and gadget controllers are + children of the otg controller. This is an attribute to a USB controller such as: -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com> To: stern@rowland.harvard.edu, balbi@ti.com, gregkh@linuxfoundation.org, peter.chen@freescale.com Cc: dan.j.williams@intel.com, jun.li@freescale.com, mathias.nyman@linux.intel.com, tony@atomide.com, Joao.Pinto@synopsys.com, abrestic@chromium.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, Roger Quadros <rogerq@ti.com> Subject: [PATCH v4 08/13] usb: doc: dt-binding: Add otg-controller property Date: Mon, 24 Aug 2015 16:21:19 +0300 [thread overview] Message-ID: <1440422484-4737-9-git-send-email-rogerq@ti.com> (raw) In-Reply-To: <1440422484-4737-1-git-send-email-rogerq@ti.com> The otg-controller property is used to link the host/gadget controllers to the otg controller. otg-controller property must contain the phandle of the otg controller. The otg core uses this property to tie the host/gadget controllres to the correct otg controller. Signed-off-by: Roger Quadros <rogerq@ti.com> --- Documentation/devicetree/bindings/usb/generic.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index bba8257..5a457bc 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -24,6 +24,11 @@ Optional properties: optional for OTG device. - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is optional for OTG device. + - otg-controller: phandle to otg controller. Host or gadget controllers can + contain this property to link it to a particular otg + controller. If this property is not present then otg + core assumes that host and gadget controllers are + children of the otg controller. This is an attribute to a USB controller such as: -- 2.1.4
next prev parent reply other threads:[~2015-08-24 13:22 UTC|newest] Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-08-24 13:21 [PATCH v4 00/13] USB: OTG/DRD Core functionality Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 01/13] usb: otg-fsm: Add documentation for struct otg_fsm Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 02/13] usb: otg-fsm: support multiple instances Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-06 5:52 ` Peter Chen 2015-09-06 5:52 ` Peter Chen 2015-08-24 13:21 ` [PATCH v4 03/13] usb: otg-fsm: Prevent build warning "VDBG" redefined Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 04/13] otg-fsm: move usb_bus_start_enum into otg-fsm->ops Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-07 1:24 ` Peter Chen 2015-09-07 1:24 ` Peter Chen 2015-09-07 9:57 ` Roger Quadros 2015-09-07 9:57 ` Roger Quadros 2015-09-08 6:54 ` Peter Chen 2015-09-08 6:54 ` Peter Chen 2015-09-08 8:24 ` Roger Quadros 2015-09-08 8:24 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 05/13] usb: hcd.h: Add OTG to HCD interface Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 06/13] usb: gadget.h: Add OTG to gadget interface Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 07/13] usb: otg: add OTG core Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-07 1:23 ` Peter Chen 2015-09-07 1:23 ` Peter Chen 2015-09-07 10:23 ` Roger Quadros 2015-09-07 10:23 ` Roger Quadros 2015-09-08 8:31 ` Peter Chen 2015-09-08 8:31 ` Peter Chen 2015-09-08 12:25 ` Roger Quadros 2015-09-08 12:25 ` Roger Quadros 2015-09-08 14:34 ` Alan Stern 2015-09-08 14:34 ` Alan Stern 2015-09-08 17:29 ` Roger Quadros 2015-09-08 17:29 ` Roger Quadros 2015-09-09 2:21 ` Peter Chen 2015-09-09 2:21 ` Peter Chen 2015-09-09 9:08 ` Roger Quadros 2015-09-09 9:08 ` Roger Quadros 2015-09-09 8:13 ` Peter Chen 2015-09-09 8:13 ` Peter Chen 2015-09-09 9:33 ` Roger Quadros 2015-09-09 9:33 ` Roger Quadros 2015-09-09 8:45 ` Peter Chen 2015-09-09 8:45 ` Peter Chen 2015-09-09 10:21 ` Roger Quadros 2015-09-09 10:21 ` Roger Quadros 2015-09-10 5:35 ` Peter Chen 2015-09-10 5:35 ` Peter Chen 2015-09-10 14:17 ` Roger Quadros 2015-09-10 14:17 ` Roger Quadros 2015-09-11 1:50 ` Peter Chen 2015-09-11 1:50 ` Peter Chen 2015-09-07 7:40 ` Li Jun 2015-09-07 7:40 ` Li Jun 2015-09-07 10:53 ` Roger Quadros 2015-09-07 10:53 ` Roger Quadros 2015-09-09 6:20 ` Li Jun 2015-09-09 6:20 ` Li Jun 2015-09-09 10:01 ` Roger Quadros 2015-09-09 10:01 ` Roger Quadros 2015-09-10 9:28 ` Li Jun 2015-09-10 9:28 ` Li Jun 2015-09-10 14:14 ` Roger Quadros 2015-09-10 14:14 ` Roger Quadros 2015-08-24 13:21 ` Roger Quadros [this message] 2015-08-24 13:21 ` [PATCH v4 08/13] usb: doc: dt-binding: Add otg-controller property Roger Quadros 2015-08-24 13:21 ` [PATCH v4 09/13] usb: chipidea: move from CONFIG_USB_OTG_FSM to CONFIG_USB_OTG Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 10/13] usb: hcd: Adapt to OTG core Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-09 2:23 ` Peter Chen 2015-09-09 2:23 ` Peter Chen 2015-09-09 9:39 ` Roger Quadros 2015-09-09 9:39 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 11/13] usb: core: hub: Notify OTG fsm when A device sets b_hnp_enable Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 12/13] usb: gadget: udc: adapt to OTG core Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 13/13] usb: otg: Add dual-role device (DRD) support Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-07 7:53 ` Li Jun 2015-09-07 7:53 ` Li Jun 2015-09-07 9:51 ` Roger Quadros 2015-09-07 9:51 ` Roger Quadros 2015-08-26 6:19 ` [PATCH v4 00/13] USB: OTG/DRD Core functionality Peter Chen 2015-08-26 6:19 ` Peter Chen 2015-09-06 7:06 ` Peter Chen 2015-09-06 7:06 ` Peter Chen 2015-09-07 11:42 ` Roger Quadros 2015-09-07 11:42 ` Roger Quadros 2015-12-03 8:19 ` Peter Chen 2015-12-03 8:19 ` Peter Chen 2015-12-03 8:54 ` Roger Quadros 2015-12-03 8:54 ` Roger Quadros
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1440422484-4737-9-git-send-email-rogerq@ti.com \ --to=rogerq@ti.com \ --cc=Joao.Pinto@synopsys.com \ --cc=abrestic@chromium.org \ --cc=balbi@ti.com \ --cc=dan.j.williams@intel.com \ --cc=gregkh@linuxfoundation.org \ --cc=jun.li@freescale.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mathias.nyman@linux.intel.com \ --cc=peter.chen@freescale.com \ --cc=stern@rowland.harvard.edu \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.