From: Christoffer Dall <christoffer.dall@linaro.org> To: kvmarm@lists.cs.columbia.edu, linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org Cc: Marc Zyngier <marc.zyngier@arm.com>, Andre Przywara <andre.przywara@arm.com> Subject: [PATCH v3 3/8] arm/arm64: KVM: vgic: Factor out level irq processing on guest exit Date: Tue, 29 Sep 2015 16:49:00 +0200 [thread overview] Message-ID: <1443538145-11990-4-git-send-email-christoffer.dall@linaro.org> (raw) In-Reply-To: <1443538145-11990-1-git-send-email-christoffer.dall@linaro.org> Currently vgic_process_maintenance() processes dealing with a completed level-triggered interrupt directly, but we are soon going to reuse this logic for level-triggered mapped interrupts with the HW bit set, so move this logic into a separate static function. Probably the most scary part of this commit is convincing yourself that the current flow is safe compared to the old one. In the following I try to list the changes and why they are harmless: Move vgic_irq_clear_queued after kvm_notify_acked_irq: Harmless because the only potential effect of clearing the queued flag wrt. kvm_set_irq is that vgic_update_irq_pending does not set the pending bit on the emulated CPU interface or in the pending_on_cpu bitmask if the function is called with level=1. However, the point of kvm_notify_acked_irq is to call kvm_set_irq with level=0, and we set the queued flag again in __kvm_vgic_sync_hwstate later on if the level is stil high. Move vgic_set_lr before kvm_notify_acked_irq: Also, harmless because the LR are cpu-local operations and kvm_notify_acked only affects the dist Move vgic_dist_irq_clear_soft_pend after kvm_notify_acked_irq: Also harmless because it's just a bit which is cleared and altering the line state does not affect this bit. Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> --- virt/kvm/arm/vgic.c | 88 ++++++++++++++++++++++++++++++----------------------- 1 file changed, 50 insertions(+), 38 deletions(-) diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c index 6bd1c9b..fe0e5db 100644 --- a/virt/kvm/arm/vgic.c +++ b/virt/kvm/arm/vgic.c @@ -1322,12 +1322,56 @@ epilog: } } +static int process_level_irq(struct kvm_vcpu *vcpu, int lr, struct vgic_lr vlr) +{ + int level_pending = 0; + + vlr.state = 0; + vlr.hwirq = 0; + vgic_set_lr(vcpu, lr, vlr); + + /* + * If the IRQ was EOIed (called from vgic_process_maintenance) or it + * went from active to non-active (called from vgic_sync_hwirq) it was + * also ACKed and we we therefore assume we can clear the soft pending + * state (should it had been set) for this interrupt. + * + * Note: if the IRQ soft pending state was set after the IRQ was + * acked, it actually shouldn't be cleared, but we have no way of + * knowing that unless we start trapping ACKs when the soft-pending + * state is set. + */ + vgic_dist_irq_clear_soft_pend(vcpu, vlr.irq); + + /* + * Tell the gic to start sampling the line of this interrupt again. + */ + vgic_irq_clear_queued(vcpu, vlr.irq); + + /* Any additional pending interrupt? */ + if (vgic_dist_irq_get_level(vcpu, vlr.irq)) { + vgic_cpu_irq_set(vcpu, vlr.irq); + level_pending = 1; + } else { + vgic_dist_irq_clear_pending(vcpu, vlr.irq); + vgic_cpu_irq_clear(vcpu, vlr.irq); + } + + /* + * Despite being EOIed, the LR may not have + * been marked as empty. + */ + vgic_sync_lr_elrsr(vcpu, lr, vlr); + + return level_pending; +} + static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) { u32 status = vgic_get_interrupt_status(vcpu); struct vgic_dist *dist = &vcpu->kvm->arch.vgic; - bool level_pending = false; struct kvm *kvm = vcpu->kvm; + int level_pending = 0; kvm_debug("STATUS = %08x\n", status); @@ -1342,54 +1386,22 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) for_each_set_bit(lr, eisr_ptr, vgic->nr_lr) { struct vgic_lr vlr = vgic_get_lr(vcpu, lr); - WARN_ON(vgic_irq_is_edge(vcpu, vlr.irq)); - spin_lock(&dist->lock); - vgic_irq_clear_queued(vcpu, vlr.irq); + WARN_ON(vgic_irq_is_edge(vcpu, vlr.irq)); WARN_ON(vlr.state & LR_STATE_MASK); - vlr.state = 0; - vgic_set_lr(vcpu, lr, vlr); - /* - * If the IRQ was EOIed it was also ACKed and we we - * therefore assume we can clear the soft pending - * state (should it had been set) for this interrupt. - * - * Note: if the IRQ soft pending state was set after - * the IRQ was acked, it actually shouldn't be - * cleared, but we have no way of knowing that unless - * we start trapping ACKs when the soft-pending state - * is set. - */ - vgic_dist_irq_clear_soft_pend(vcpu, vlr.irq); /* * kvm_notify_acked_irq calls kvm_set_irq() - * to reset the IRQ level. Need to release the - * lock for kvm_set_irq to grab it. + * to reset the IRQ level, which grabs the dist->lock + * so we call this before taking the dist->lock. */ - spin_unlock(&dist->lock); - kvm_notify_acked_irq(kvm, 0, vlr.irq - VGIC_NR_PRIVATE_IRQS); - spin_lock(&dist->lock); - - /* Any additional pending interrupt? */ - if (vgic_dist_irq_get_level(vcpu, vlr.irq)) { - vgic_cpu_irq_set(vcpu, vlr.irq); - level_pending = true; - } else { - vgic_dist_irq_clear_pending(vcpu, vlr.irq); - vgic_cpu_irq_clear(vcpu, vlr.irq); - } + spin_lock(&dist->lock); + level_pending |= process_level_irq(vcpu, lr, vlr); spin_unlock(&dist->lock); - - /* - * Despite being EOIed, the LR may not have - * been marked as empty. - */ - vgic_sync_lr_elrsr(vcpu, lr, vlr); } } -- 2.1.2.330.g565301e.dirty
WARNING: multiple messages have this Message-ID (diff)
From: christoffer.dall@linaro.org (Christoffer Dall) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 3/8] arm/arm64: KVM: vgic: Factor out level irq processing on guest exit Date: Tue, 29 Sep 2015 16:49:00 +0200 [thread overview] Message-ID: <1443538145-11990-4-git-send-email-christoffer.dall@linaro.org> (raw) In-Reply-To: <1443538145-11990-1-git-send-email-christoffer.dall@linaro.org> Currently vgic_process_maintenance() processes dealing with a completed level-triggered interrupt directly, but we are soon going to reuse this logic for level-triggered mapped interrupts with the HW bit set, so move this logic into a separate static function. Probably the most scary part of this commit is convincing yourself that the current flow is safe compared to the old one. In the following I try to list the changes and why they are harmless: Move vgic_irq_clear_queued after kvm_notify_acked_irq: Harmless because the only potential effect of clearing the queued flag wrt. kvm_set_irq is that vgic_update_irq_pending does not set the pending bit on the emulated CPU interface or in the pending_on_cpu bitmask if the function is called with level=1. However, the point of kvm_notify_acked_irq is to call kvm_set_irq with level=0, and we set the queued flag again in __kvm_vgic_sync_hwstate later on if the level is stil high. Move vgic_set_lr before kvm_notify_acked_irq: Also, harmless because the LR are cpu-local operations and kvm_notify_acked only affects the dist Move vgic_dist_irq_clear_soft_pend after kvm_notify_acked_irq: Also harmless because it's just a bit which is cleared and altering the line state does not affect this bit. Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> --- virt/kvm/arm/vgic.c | 88 ++++++++++++++++++++++++++++++----------------------- 1 file changed, 50 insertions(+), 38 deletions(-) diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c index 6bd1c9b..fe0e5db 100644 --- a/virt/kvm/arm/vgic.c +++ b/virt/kvm/arm/vgic.c @@ -1322,12 +1322,56 @@ epilog: } } +static int process_level_irq(struct kvm_vcpu *vcpu, int lr, struct vgic_lr vlr) +{ + int level_pending = 0; + + vlr.state = 0; + vlr.hwirq = 0; + vgic_set_lr(vcpu, lr, vlr); + + /* + * If the IRQ was EOIed (called from vgic_process_maintenance) or it + * went from active to non-active (called from vgic_sync_hwirq) it was + * also ACKed and we we therefore assume we can clear the soft pending + * state (should it had been set) for this interrupt. + * + * Note: if the IRQ soft pending state was set after the IRQ was + * acked, it actually shouldn't be cleared, but we have no way of + * knowing that unless we start trapping ACKs when the soft-pending + * state is set. + */ + vgic_dist_irq_clear_soft_pend(vcpu, vlr.irq); + + /* + * Tell the gic to start sampling the line of this interrupt again. + */ + vgic_irq_clear_queued(vcpu, vlr.irq); + + /* Any additional pending interrupt? */ + if (vgic_dist_irq_get_level(vcpu, vlr.irq)) { + vgic_cpu_irq_set(vcpu, vlr.irq); + level_pending = 1; + } else { + vgic_dist_irq_clear_pending(vcpu, vlr.irq); + vgic_cpu_irq_clear(vcpu, vlr.irq); + } + + /* + * Despite being EOIed, the LR may not have + * been marked as empty. + */ + vgic_sync_lr_elrsr(vcpu, lr, vlr); + + return level_pending; +} + static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) { u32 status = vgic_get_interrupt_status(vcpu); struct vgic_dist *dist = &vcpu->kvm->arch.vgic; - bool level_pending = false; struct kvm *kvm = vcpu->kvm; + int level_pending = 0; kvm_debug("STATUS = %08x\n", status); @@ -1342,54 +1386,22 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) for_each_set_bit(lr, eisr_ptr, vgic->nr_lr) { struct vgic_lr vlr = vgic_get_lr(vcpu, lr); - WARN_ON(vgic_irq_is_edge(vcpu, vlr.irq)); - spin_lock(&dist->lock); - vgic_irq_clear_queued(vcpu, vlr.irq); + WARN_ON(vgic_irq_is_edge(vcpu, vlr.irq)); WARN_ON(vlr.state & LR_STATE_MASK); - vlr.state = 0; - vgic_set_lr(vcpu, lr, vlr); - /* - * If the IRQ was EOIed it was also ACKed and we we - * therefore assume we can clear the soft pending - * state (should it had been set) for this interrupt. - * - * Note: if the IRQ soft pending state was set after - * the IRQ was acked, it actually shouldn't be - * cleared, but we have no way of knowing that unless - * we start trapping ACKs when the soft-pending state - * is set. - */ - vgic_dist_irq_clear_soft_pend(vcpu, vlr.irq); /* * kvm_notify_acked_irq calls kvm_set_irq() - * to reset the IRQ level. Need to release the - * lock for kvm_set_irq to grab it. + * to reset the IRQ level, which grabs the dist->lock + * so we call this before taking the dist->lock. */ - spin_unlock(&dist->lock); - kvm_notify_acked_irq(kvm, 0, vlr.irq - VGIC_NR_PRIVATE_IRQS); - spin_lock(&dist->lock); - - /* Any additional pending interrupt? */ - if (vgic_dist_irq_get_level(vcpu, vlr.irq)) { - vgic_cpu_irq_set(vcpu, vlr.irq); - level_pending = true; - } else { - vgic_dist_irq_clear_pending(vcpu, vlr.irq); - vgic_cpu_irq_clear(vcpu, vlr.irq); - } + spin_lock(&dist->lock); + level_pending |= process_level_irq(vcpu, lr, vlr); spin_unlock(&dist->lock); - - /* - * Despite being EOIed, the LR may not have - * been marked as empty. - */ - vgic_sync_lr_elrsr(vcpu, lr, vlr); } } -- 2.1.2.330.g565301e.dirty
next prev parent reply other threads:[~2015-09-29 14:49 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-09-29 14:48 [PATCH v3 0/8] Rework architected timer and forwarded IRQs handling Christoffer Dall 2015-09-29 14:48 ` Christoffer Dall 2015-09-29 14:48 ` [PATCH v3 1/8] KVM: Add kvm_arch_vcpu_{un}blocking callbacks Christoffer Dall 2015-09-29 14:48 ` Christoffer Dall 2015-09-29 14:48 ` [PATCH v3 2/8] arm/arm64: KVM: arch_timer: Only schedule soft timer on vcpu_block Christoffer Dall 2015-09-29 14:48 ` Christoffer Dall 2015-09-29 14:49 ` Christoffer Dall [this message] 2015-09-29 14:49 ` [PATCH v3 3/8] arm/arm64: KVM: vgic: Factor out level irq processing on guest exit Christoffer Dall 2015-10-02 14:52 ` Andre Przywara 2015-10-02 14:52 ` Andre Przywara 2015-10-02 20:48 ` Christoffer Dall 2015-10-02 20:48 ` Christoffer Dall 2015-09-29 14:49 ` [PATCH v3 4/8] arm/arm64: KVM: Implement GICD_ICFGR as RO for PPIs Christoffer Dall 2015-09-29 14:49 ` Christoffer Dall 2015-10-02 14:51 ` Andre Przywara 2015-10-02 14:51 ` Andre Przywara 2015-10-02 20:52 ` Christoffer Dall 2015-10-02 20:52 ` Christoffer Dall 2015-09-29 14:49 ` [PATCH v3 5/8] arm/arm64: KVM: Use appropriate define in VGIC reset code Christoffer Dall 2015-09-29 14:49 ` Christoffer Dall 2015-10-02 14:51 ` Andre Przywara 2015-10-02 14:51 ` Andre Przywara 2015-09-29 14:49 ` [PATCH v3 6/8] arm/arm64: KVM: Add forwarded physical interrupts documentation Christoffer Dall 2015-09-29 14:49 ` Christoffer Dall 2015-09-29 14:49 ` [PATCH v3 7/8] arm/arm64: KVM: Rework the arch timer to use level-triggered semantics Christoffer Dall 2015-09-29 14:49 ` Christoffer Dall 2015-09-29 14:49 ` [PATCH v3 8/8] arm/arm64: KVM: Support edge-triggered forwarded interrupts Christoffer Dall 2015-09-29 14:49 ` Christoffer Dall 2015-10-02 17:18 ` Andre Przywara 2015-10-02 17:18 ` Andre Przywara 2015-10-02 21:08 ` Christoffer Dall 2015-10-02 21:08 ` Christoffer Dall
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1443538145-11990-4-git-send-email-christoffer.dall@linaro.org \ --to=christoffer.dall@linaro.org \ --cc=andre.przywara@arm.com \ --cc=kvm@vger.kernel.org \ --cc=kvmarm@lists.cs.columbia.edu \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=marc.zyngier@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.