From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> To: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org, linux-omap@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-tegra@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, Benoit Cousson <bcousson@baylibre.com>, Tony Lindgren <tony@atomide.com>, Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Gregory Clement <gregory.clement@free-electrons.com>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <k.kozlowski@samsung.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <kernel@pengutronix.de>, Stephen Warren <swarren@wwwdotorg.org>, Thierry Reding <thierry.reding@gmail.com>, Alexandre Courbot <gnurou@gmail.com>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Linus Walleij <linus.walleij@linaro.org> Subject: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity Date: Tue, 13 Oct 2015 00:12:29 +0300 [thread overview] Message-ID: <1444684386-17094-1-git-send-email-laurent.pinchart@ideasonboard.com> (raw) Hello, While working on regulators, GPIOs and DT I noticed that many of our DT source files incorrectly describe fixed regulators. The common error patterns are - Usage of the undefined (and never parsed) enable-active-low property - Usage of the enable-active-high property without specifying an enable GPIO - Typos in the enabl GPIO property name (gpios instead of gpio) - Mismatch between the enable-active-high property (or the lack thereof) and the enable GPIO flags This patch series fixes those issues in all the DT sources after locating the errors using the following script. ------------------------------------------------------------------------------ #!/bin/sh echo $1 cat $1 | awk ' BEGIN { open_drain = 0; active_high = 0; gpio = 0; flags = 0; } match($0, /([a-zA-Z0-9@_-]*) {/, ary) { name = ary[1]; } /compatible.*"regulator-fixed"/ { found = 1; } /enable-active-high/ { active_high = 1; } /gpio-open-drain/ { open_drain = 1; } match($0, /gpio += <.* ([^ ]*)>/, ary) { gpio = 1; flags = ary[1]; if (flags == 0) flags = "GPIO_ACTIVE_HIGH"; } /}/ { if (found) { if (gpio) { print "\t" name ": active high " active_high " " flags " open drain " open_drain; if ((active_high && flags == "GPIO_ACTIVE_LOW") || (!active_high && flags == "GPIO_ACTIVE_HIGH")) print "WARNING: enable-active-high and flags do not match" } else { if (active_high) print "WARNING: active high without GPIO" if (open_drain) print "WARNING: open drain without GPIO" } } gpio = 0; found = 0; active_high = 0; open_drain = 0; flags = 0; } ' ------------------------------------------------------------------------------ All patches except for the ones touching omap3-beagle-xm and omap3-overo-base are untested as I lack test hardware. As there's no dependency between the patches touching different source files the appropriate maintainers could take their share of the patches in their tree. Alternatively I could send a single pull request after collecting all acks but that might be more complex. Cc: devicetree@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Laurent Pinchart (37): ARM: dts: am437x-gp-evm: Remove unneeded regulator property ARM: dts: am43xx-epos-evm: Remove unneeded regulator property ARM: mvebu: Armada 388 GP: Remove unneeded regulator property ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property ARM: dts: s5pv210-aquila: Fix typo in regulator enable GPIO property ARM: dts: s5pv210-goni: Fix typo in regulator enable GPIO property ARM: dts: omap3-evm: Remove invalid enable-active-low regulator property ARM: dts: omap3-sb-t35: Remove invalid enable-active-low regulator property ARM: dts: omap3-tao3530: Remove invalid enable-active-low regulator property ARM: dts: imx6qdl-tx6: Fix regulator enable GPIO polarity ARM: dts: dove-cm-a510: Fix regulator enable GPIO polarity ARM: dts: dove-sbc-a510: Fix regulator enable GPIO polarity ARM: dts: exynos5250-arndale: Fix regulator enable GPIO polarity ARM: dts: imx23-evk: Fix regulator enable GPIO polarity ARM: dts: imx23-stmp378x_devb: Fix regulator enable GPIO polarity ARM: dts: imx25-pdk: Fix regulator enable GPIO polarity ARM: dts: imx28-cfa10036: Fix regulator enable GPIO polarity ARM: dts: imx28-evk: Fix regulator enable GPIO polarity ARM: dts: imx28-m28cu3: Fix regulator enable GPIO polarity ARM: dts: imx28-m28evk: Fix regulator enable GPIO polarity ARM: dts: imx28-sps1: Fix regulator enable GPIO polarity ARM: dts: imx28-tx28: Fix regulator enable GPIO polarity ARM: dts: imx53-m53evk: Fix regulator enable GPIO polarity ARM: dts: imx53-mba53: Fix regulator enable GPIO polarity ARM: dts: imx53-tx53: Fix regulator enable GPIO polarity ARM: dts: imx6q-dmo-edmqmx6: Fix regulator enable GPIO polarity ARM: dts: kirkwood-blackarmor-nas220: Fix regulator enable GPIO polarity ARM: dts: omap4-duovero: Fix regulator enable GPIO polarity ARM: dts: kirkwood-nsa3x0-common: Fix regulator enable GPIO polarity ARM: dts: omap3-beagle-xm: Fix regulator enable GPIO polarity ARM: dts: omap3-beagle: Fix regulator enable GPIO polarity ARM: dts: omap3-overo-base: Fix regulator enable GPIO polarity ARM: dts: omap3-tao3530: Fix regulator enable GPIO polarity ARM: dts: tegra20-harmony: Fix regulator enable GPIO polarity ARM: dts: tegra20-iris-512: Fix regulator enable GPIO polarity ARM: dts: tegra20-seaboard: Fix regulator enable GPIO polarity ARM: dts: tegra20-ventana: Fix regulator enable GPIO polarity arch/arm/boot/dts/am437x-gp-evm.dts | 1 - arch/arm/boot/dts/am43x-epos-evm.dts | 1 - arch/arm/boot/dts/armada-388-gp.dts | 2 -- arch/arm/boot/dts/dove-cm-a510.dtsi | 2 +- arch/arm/boot/dts/dove-sbc-a510.dts | 4 ++-- arch/arm/boot/dts/exynos5250-arndale.dts | 2 +- arch/arm/boot/dts/imx23-evk.dts | 3 ++- arch/arm/boot/dts/imx23-stmp378x_devb.dts | 3 ++- arch/arm/boot/dts/imx25-pdk.dts | 2 +- arch/arm/boot/dts/imx28-cfa10036.dts | 2 +- arch/arm/boot/dts/imx28-evk.dts | 4 ++-- arch/arm/boot/dts/imx28-m28cu3.dts | 4 ++-- arch/arm/boot/dts/imx28-m28evk.dts | 6 +++--- arch/arm/boot/dts/imx28-sps1.dts | 2 +- arch/arm/boot/dts/imx28-tx28.dts | 2 +- arch/arm/boot/dts/imx53-m53evk.dts | 2 +- arch/arm/boot/dts/imx53-mba53.dts | 2 +- arch/arm/boot/dts/imx53-tx53.dtsi | 2 +- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 3 +-- arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 +- arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts | 4 ++-- arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi | 2 +- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- arch/arm/boot/dts/omap3-beagle.dts | 2 +- arch/arm/boot/dts/omap3-evm-common.dtsi | 1 - arch/arm/boot/dts/omap3-overo-base.dtsi | 4 ++-- arch/arm/boot/dts/omap3-sb-t35.dtsi | 1 - arch/arm/boot/dts/omap3-tao3530.dtsi | 3 +-- arch/arm/boot/dts/omap4-duovero.dtsi | 2 +- arch/arm/boot/dts/s5pv210-aquila.dts | 2 +- arch/arm/boot/dts/s5pv210-goni.dts | 4 ++-- arch/arm/boot/dts/tegra20-harmony.dts | 2 +- arch/arm/boot/dts/tegra20-iris-512.dts | 2 +- arch/arm/boot/dts/tegra20-seaboard.dts | 2 +- arch/arm/boot/dts/tegra20-ventana.dts | 2 +- 36 files changed, 41 insertions(+), 47 deletions(-) -- Regards, Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity Date: Tue, 13 Oct 2015 00:12:29 +0300 [thread overview] Message-ID: <1444684386-17094-1-git-send-email-laurent.pinchart@ideasonboard.com> (raw) Hello, While working on regulators, GPIOs and DT I noticed that many of our DT source files incorrectly describe fixed regulators. The common error patterns are - Usage of the undefined (and never parsed) enable-active-low property - Usage of the enable-active-high property without specifying an enable GPIO - Typos in the enabl GPIO property name (gpios instead of gpio) - Mismatch between the enable-active-high property (or the lack thereof) and the enable GPIO flags This patch series fixes those issues in all the DT sources after locating the errors using the following script. ------------------------------------------------------------------------------ #!/bin/sh echo $1 cat $1 | awk ' BEGIN { open_drain = 0; active_high = 0; gpio = 0; flags = 0; } match($0, /([a-zA-Z0-9 at _-]*) {/, ary) { name = ary[1]; } /compatible.*"regulator-fixed"/ { found = 1; } /enable-active-high/ { active_high = 1; } /gpio-open-drain/ { open_drain = 1; } match($0, /gpio += <.* ([^ ]*)>/, ary) { gpio = 1; flags = ary[1]; if (flags == 0) flags = "GPIO_ACTIVE_HIGH"; } /}/ { if (found) { if (gpio) { print "\t" name ": active high " active_high " " flags " open drain " open_drain; if ((active_high && flags == "GPIO_ACTIVE_LOW") || (!active_high && flags == "GPIO_ACTIVE_HIGH")) print "WARNING: enable-active-high and flags do not match" } else { if (active_high) print "WARNING: active high without GPIO" if (open_drain) print "WARNING: open drain without GPIO" } } gpio = 0; found = 0; active_high = 0; open_drain = 0; flags = 0; } ' ------------------------------------------------------------------------------ All patches except for the ones touching omap3-beagle-xm and omap3-overo-base are untested as I lack test hardware. As there's no dependency between the patches touching different source files the appropriate maintainers could take their share of the patches in their tree. Alternatively I could send a single pull request after collecting all acks but that might be more complex. Cc: devicetree at vger.kernel.org Cc: linux-omap at vger.kernel.org Cc: linux-samsung-soc at vger.kernel.org Cc: linux-tegra at vger.kernel.org Cc: linux-gpio at vger.kernel.org Cc: linux-kernel at vger.kernel.org Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Laurent Pinchart (37): ARM: dts: am437x-gp-evm: Remove unneeded regulator property ARM: dts: am43xx-epos-evm: Remove unneeded regulator property ARM: mvebu: Armada 388 GP: Remove unneeded regulator property ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property ARM: dts: s5pv210-aquila: Fix typo in regulator enable GPIO property ARM: dts: s5pv210-goni: Fix typo in regulator enable GPIO property ARM: dts: omap3-evm: Remove invalid enable-active-low regulator property ARM: dts: omap3-sb-t35: Remove invalid enable-active-low regulator property ARM: dts: omap3-tao3530: Remove invalid enable-active-low regulator property ARM: dts: imx6qdl-tx6: Fix regulator enable GPIO polarity ARM: dts: dove-cm-a510: Fix regulator enable GPIO polarity ARM: dts: dove-sbc-a510: Fix regulator enable GPIO polarity ARM: dts: exynos5250-arndale: Fix regulator enable GPIO polarity ARM: dts: imx23-evk: Fix regulator enable GPIO polarity ARM: dts: imx23-stmp378x_devb: Fix regulator enable GPIO polarity ARM: dts: imx25-pdk: Fix regulator enable GPIO polarity ARM: dts: imx28-cfa10036: Fix regulator enable GPIO polarity ARM: dts: imx28-evk: Fix regulator enable GPIO polarity ARM: dts: imx28-m28cu3: Fix regulator enable GPIO polarity ARM: dts: imx28-m28evk: Fix regulator enable GPIO polarity ARM: dts: imx28-sps1: Fix regulator enable GPIO polarity ARM: dts: imx28-tx28: Fix regulator enable GPIO polarity ARM: dts: imx53-m53evk: Fix regulator enable GPIO polarity ARM: dts: imx53-mba53: Fix regulator enable GPIO polarity ARM: dts: imx53-tx53: Fix regulator enable GPIO polarity ARM: dts: imx6q-dmo-edmqmx6: Fix regulator enable GPIO polarity ARM: dts: kirkwood-blackarmor-nas220: Fix regulator enable GPIO polarity ARM: dts: omap4-duovero: Fix regulator enable GPIO polarity ARM: dts: kirkwood-nsa3x0-common: Fix regulator enable GPIO polarity ARM: dts: omap3-beagle-xm: Fix regulator enable GPIO polarity ARM: dts: omap3-beagle: Fix regulator enable GPIO polarity ARM: dts: omap3-overo-base: Fix regulator enable GPIO polarity ARM: dts: omap3-tao3530: Fix regulator enable GPIO polarity ARM: dts: tegra20-harmony: Fix regulator enable GPIO polarity ARM: dts: tegra20-iris-512: Fix regulator enable GPIO polarity ARM: dts: tegra20-seaboard: Fix regulator enable GPIO polarity ARM: dts: tegra20-ventana: Fix regulator enable GPIO polarity arch/arm/boot/dts/am437x-gp-evm.dts | 1 - arch/arm/boot/dts/am43x-epos-evm.dts | 1 - arch/arm/boot/dts/armada-388-gp.dts | 2 -- arch/arm/boot/dts/dove-cm-a510.dtsi | 2 +- arch/arm/boot/dts/dove-sbc-a510.dts | 4 ++-- arch/arm/boot/dts/exynos5250-arndale.dts | 2 +- arch/arm/boot/dts/imx23-evk.dts | 3 ++- arch/arm/boot/dts/imx23-stmp378x_devb.dts | 3 ++- arch/arm/boot/dts/imx25-pdk.dts | 2 +- arch/arm/boot/dts/imx28-cfa10036.dts | 2 +- arch/arm/boot/dts/imx28-evk.dts | 4 ++-- arch/arm/boot/dts/imx28-m28cu3.dts | 4 ++-- arch/arm/boot/dts/imx28-m28evk.dts | 6 +++--- arch/arm/boot/dts/imx28-sps1.dts | 2 +- arch/arm/boot/dts/imx28-tx28.dts | 2 +- arch/arm/boot/dts/imx53-m53evk.dts | 2 +- arch/arm/boot/dts/imx53-mba53.dts | 2 +- arch/arm/boot/dts/imx53-tx53.dtsi | 2 +- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 3 +-- arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 +- arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts | 4 ++-- arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi | 2 +- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- arch/arm/boot/dts/omap3-beagle.dts | 2 +- arch/arm/boot/dts/omap3-evm-common.dtsi | 1 - arch/arm/boot/dts/omap3-overo-base.dtsi | 4 ++-- arch/arm/boot/dts/omap3-sb-t35.dtsi | 1 - arch/arm/boot/dts/omap3-tao3530.dtsi | 3 +-- arch/arm/boot/dts/omap4-duovero.dtsi | 2 +- arch/arm/boot/dts/s5pv210-aquila.dts | 2 +- arch/arm/boot/dts/s5pv210-goni.dts | 4 ++-- arch/arm/boot/dts/tegra20-harmony.dts | 2 +- arch/arm/boot/dts/tegra20-iris-512.dts | 2 +- arch/arm/boot/dts/tegra20-seaboard.dts | 2 +- arch/arm/boot/dts/tegra20-ventana.dts | 2 +- 36 files changed, 41 insertions(+), 47 deletions(-) -- Regards, Laurent Pinchart
next reply other threads:[~2015-10-12 21:12 UTC|newest] Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-10-12 21:12 Laurent Pinchart [this message] 2015-10-12 21:12 ` [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity Laurent Pinchart 2015-10-12 21:12 ` [PATCH 01/37] ARM: dts: am437x-gp-evm: Remove unneeded regulator property Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 02/37] ARM: dts: am43xx-epos-evm: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 03/37] ARM: mvebu: Armada 388 GP: " Laurent Pinchart 2015-10-13 8:37 ` Thomas Petazzoni 2015-10-12 21:12 ` [PATCH 04/37] ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property Laurent Pinchart 2015-10-12 21:12 ` [PATCH 05/37] ARM: dts: s5pv210-aquila: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-13 0:20 ` Krzysztof Kozlowski 2015-10-13 0:20 ` Krzysztof Kozlowski 2015-10-12 21:12 ` [PATCH 06/37] ARM: dts: s5pv210-goni: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-13 0:20 ` Krzysztof Kozlowski 2015-10-13 0:20 ` Krzysztof Kozlowski 2015-10-12 21:12 ` [PATCH 07/37] ARM: dts: omap3-evm: Remove invalid enable-active-low regulator property Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 08/37] ARM: dts: omap3-sb-t35: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 09/37] ARM: dts: omap3-tao3530: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 10/37] ARM: dts: imx6qdl-tx6: Fix regulator enable GPIO polarity Laurent Pinchart 2015-10-12 21:12 ` [PATCH 11/37] ARM: dts: dove-cm-a510: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 12/37] ARM: dts: dove-sbc-a510: " Laurent Pinchart 2015-10-12 22:50 ` Jason Cooper 2015-10-12 23:10 ` Laurent Pinchart 2015-10-12 23:26 ` Jason Cooper 2015-10-12 21:12 ` [PATCH 13/37] ARM: dts: exynos5250-arndale: " Laurent Pinchart 2015-10-13 14:11 ` Shawn Guo 2015-10-12 21:12 ` [PATCH 14/37] ARM: dts: imx23-evk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 15/37] ARM: dts: imx23-stmp378x_devb: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 16/37] ARM: dts: imx25-pdk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 17/37] ARM: dts: imx28-cfa10036: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 18/37] ARM: dts: imx28-evk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 19/37] ARM: dts: imx28-m28cu3: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 20/37] ARM: dts: imx28-m28evk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 21/37] ARM: dts: imx28-sps1: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 22/37] ARM: dts: imx28-tx28: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 23/37] ARM: dts: imx53-m53evk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 24/37] ARM: dts: imx53-mba53: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 25/37] ARM: dts: imx53-tx53: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 26/37] ARM: dts: imx6q-dmo-edmqmx6: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 27/37] ARM: dts: kirkwood-blackarmor-nas220: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 28/37] ARM: dts: omap4-duovero: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 29/37] ARM: dts: kirkwood-nsa3x0-common: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 30/37] ARM: dts: omap3-beagle-xm: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 31/37] ARM: dts: omap3-beagle: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 32/37] ARM: dts: omap3-overo-base: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 33/37] ARM: dts: omap3-tao3530: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart [not found] ` <1444684386-17094-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> 2015-10-12 21:13 ` [PATCH 34/37] ARM: dts: tegra20-harmony: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 35/37] ARM: dts: tegra20-iris-512: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 36/37] ARM: dts: tegra20-seaboard: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 37/37] ARM: dts: tegra20-ventana: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart [not found] ` <1444684386-17094-38-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> 2015-10-12 21:34 ` Stephen Warren 2015-10-12 21:34 ` Stephen Warren [not found] ` <561C2773.5090408-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> 2015-10-12 22:24 ` Laurent Pinchart 2015-10-12 22:24 ` Laurent Pinchart 2015-10-13 16:35 ` Stephen Warren 2015-10-13 16:35 ` Stephen Warren 2015-10-12 21:46 ` [PATCH 00/37] ARM: dts: Fix fixed regulators " Tony Lindgren 2015-10-12 21:46 ` Tony Lindgren 2015-10-12 21:46 ` Tony Lindgren 2015-10-12 22:19 ` Javier Martinez Canillas 2015-10-12 22:19 ` Javier Martinez Canillas 2015-10-12 22:22 ` Laurent Pinchart 2015-10-12 22:22 ` Laurent Pinchart 2015-10-12 22:24 ` Tony Lindgren 2015-10-12 22:24 ` Tony Lindgren 2015-10-12 22:24 ` Tony Lindgren 2015-10-13 6:19 ` Sascha Hauer 2015-10-13 6:19 ` Sascha Hauer 2015-10-13 6:19 ` Sascha Hauer 2015-10-13 14:09 ` Shawn Guo 2015-10-13 14:09 ` Shawn Guo 2015-10-13 14:09 ` Shawn Guo 2015-10-13 14:17 ` Laurent Pinchart 2015-10-13 14:17 ` Laurent Pinchart 2015-10-13 15:09 ` Shawn Guo 2015-10-13 15:09 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1444684386-17094-1-git-send-email-laurent.pinchart@ideasonboard.com \ --to=laurent.pinchart@ideasonboard.com \ --cc=andrew@lunn.ch \ --cc=bcousson@baylibre.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=gnurou@gmail.com \ --cc=gregory.clement@free-electrons.com \ --cc=jason@lakedaemon.net \ --cc=k.kozlowski@samsung.com \ --cc=kernel@pengutronix.de \ --cc=kgene@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux-tegra@vger.kernel.org \ --cc=sebastian.hesselbarth@gmail.com \ --cc=shawnguo@kernel.org \ --cc=swarren@wwwdotorg.org \ --cc=thierry.reding@gmail.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.