From: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>, Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, Alexandre Courbot <gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Subject: [PATCH 37/37] ARM: dts: tegra20-ventana: Fix regulator enable GPIO polarity Date: Tue, 13 Oct 2015 00:13:06 +0300 [thread overview] Message-ID: <1444684386-17094-38-git-send-email-laurent.pinchart@ideasonboard.com> (raw) In-Reply-To: <1444684386-17094-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> The enable GPIO is active low, but is flagged as active high in the gpio property. As the gpio property flags are currently unused by the driver this doesn't cause any issue for now, but will break later if the driver starts making use of the flags. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> --- arch/arm/boot/dts/tegra20-ventana.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> Cc: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Cc: Alexandre Courbot <gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 04c58e9ca490..ba1fc1487c69 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -635,7 +635,7 @@ regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + gpio = <&pmic 0 GPIO_ACTIVE_LOW>; }; regulator@2 { -- 2.4.9
WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 37/37] ARM: dts: tegra20-ventana: Fix regulator enable GPIO polarity Date: Tue, 13 Oct 2015 00:13:06 +0300 [thread overview] Message-ID: <1444684386-17094-38-git-send-email-laurent.pinchart@ideasonboard.com> (raw) In-Reply-To: <1444684386-17094-1-git-send-email-laurent.pinchart@ideasonboard.com> The enable GPIO is active low, but is flagged as active high in the gpio property. As the gpio property flags are currently unused by the driver this doesn't cause any issue for now, but will break later if the driver starts making use of the flags. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- arch/arm/boot/dts/tegra20-ventana.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Cc: linux-tegra at vger.kernel.org Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 04c58e9ca490..ba1fc1487c69 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -635,7 +635,7 @@ regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + gpio = <&pmic 0 GPIO_ACTIVE_LOW>; }; regulator at 2 { -- 2.4.9
next prev parent reply other threads:[~2015-10-12 21:13 UTC|newest] Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-10-12 21:12 [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 01/37] ARM: dts: am437x-gp-evm: Remove unneeded regulator property Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 02/37] ARM: dts: am43xx-epos-evm: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 03/37] ARM: mvebu: Armada 388 GP: " Laurent Pinchart 2015-10-13 8:37 ` Thomas Petazzoni 2015-10-12 21:12 ` [PATCH 04/37] ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property Laurent Pinchart 2015-10-12 21:12 ` [PATCH 05/37] ARM: dts: s5pv210-aquila: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-13 0:20 ` Krzysztof Kozlowski 2015-10-13 0:20 ` Krzysztof Kozlowski 2015-10-12 21:12 ` [PATCH 06/37] ARM: dts: s5pv210-goni: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-13 0:20 ` Krzysztof Kozlowski 2015-10-13 0:20 ` Krzysztof Kozlowski 2015-10-12 21:12 ` [PATCH 07/37] ARM: dts: omap3-evm: Remove invalid enable-active-low regulator property Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 08/37] ARM: dts: omap3-sb-t35: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 09/37] ARM: dts: omap3-tao3530: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 10/37] ARM: dts: imx6qdl-tx6: Fix regulator enable GPIO polarity Laurent Pinchart 2015-10-12 21:12 ` [PATCH 11/37] ARM: dts: dove-cm-a510: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 12/37] ARM: dts: dove-sbc-a510: " Laurent Pinchart 2015-10-12 22:50 ` Jason Cooper 2015-10-12 23:10 ` Laurent Pinchart 2015-10-12 23:26 ` Jason Cooper 2015-10-12 21:12 ` [PATCH 13/37] ARM: dts: exynos5250-arndale: " Laurent Pinchart 2015-10-13 14:11 ` Shawn Guo 2015-10-12 21:12 ` [PATCH 14/37] ARM: dts: imx23-evk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 15/37] ARM: dts: imx23-stmp378x_devb: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 16/37] ARM: dts: imx25-pdk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 17/37] ARM: dts: imx28-cfa10036: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 18/37] ARM: dts: imx28-evk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 19/37] ARM: dts: imx28-m28cu3: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 20/37] ARM: dts: imx28-m28evk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 21/37] ARM: dts: imx28-sps1: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 22/37] ARM: dts: imx28-tx28: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 23/37] ARM: dts: imx53-m53evk: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 24/37] ARM: dts: imx53-mba53: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 25/37] ARM: dts: imx53-tx53: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 26/37] ARM: dts: imx6q-dmo-edmqmx6: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 27/37] ARM: dts: kirkwood-blackarmor-nas220: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 28/37] ARM: dts: omap4-duovero: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:12 ` [PATCH 29/37] ARM: dts: kirkwood-nsa3x0-common: " Laurent Pinchart 2015-10-12 21:12 ` [PATCH 30/37] ARM: dts: omap3-beagle-xm: " Laurent Pinchart 2015-10-12 21:12 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 31/37] ARM: dts: omap3-beagle: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 32/37] ARM: dts: omap3-overo-base: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 33/37] ARM: dts: omap3-tao3530: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart [not found] ` <1444684386-17094-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> 2015-10-12 21:13 ` [PATCH 34/37] ARM: dts: tegra20-harmony: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 35/37] ARM: dts: tegra20-iris-512: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` [PATCH 36/37] ARM: dts: tegra20-seaboard: " Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart 2015-10-12 21:13 ` Laurent Pinchart [this message] 2015-10-12 21:13 ` [PATCH 37/37] ARM: dts: tegra20-ventana: " Laurent Pinchart [not found] ` <1444684386-17094-38-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> 2015-10-12 21:34 ` Stephen Warren 2015-10-12 21:34 ` Stephen Warren [not found] ` <561C2773.5090408-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> 2015-10-12 22:24 ` Laurent Pinchart 2015-10-12 22:24 ` Laurent Pinchart 2015-10-13 16:35 ` Stephen Warren 2015-10-13 16:35 ` Stephen Warren 2015-10-12 21:46 ` [PATCH 00/37] ARM: dts: Fix fixed regulators " Tony Lindgren 2015-10-12 21:46 ` Tony Lindgren 2015-10-12 21:46 ` Tony Lindgren 2015-10-12 22:19 ` Javier Martinez Canillas 2015-10-12 22:19 ` Javier Martinez Canillas 2015-10-12 22:22 ` Laurent Pinchart 2015-10-12 22:22 ` Laurent Pinchart 2015-10-12 22:24 ` Tony Lindgren 2015-10-12 22:24 ` Tony Lindgren 2015-10-12 22:24 ` Tony Lindgren 2015-10-13 6:19 ` Sascha Hauer 2015-10-13 6:19 ` Sascha Hauer 2015-10-13 6:19 ` Sascha Hauer 2015-10-13 14:09 ` Shawn Guo 2015-10-13 14:09 ` Shawn Guo 2015-10-13 14:09 ` Shawn Guo 2015-10-13 14:17 ` Laurent Pinchart 2015-10-13 14:17 ` Laurent Pinchart 2015-10-13 15:09 ` Shawn Guo 2015-10-13 15:09 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1444684386-17094-38-git-send-email-laurent.pinchart@ideasonboard.com \ --to=laurent.pinchart-rylnwiuwjnjg/c1bvhzhaw@public.gmane.org \ --cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \ --cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.