All of lore.kernel.org
 help / color / mirror / Atom feed
From: Xiao Guangrong <guangrong.xiao@linux.intel.com>
To: pbonzini@redhat.com, imammedo@redhat.com
Cc: gleb@kernel.org, mtosatti@redhat.com, stefanha@redhat.com,
	mst@redhat.com, rth@twiddle.net, ehabkost@redhat.com,
	dan.j.williams@intel.com, kvm@vger.kernel.org,
	qemu-devel@nongnu.org,
	Xiao Guangrong <guangrong.xiao@linux.intel.com>
Subject: [PATCH v4 23/33] nvdimm acpi: init the address region used by NVDIMM ACPI
Date: Mon, 19 Oct 2015 08:54:09 +0800	[thread overview]
Message-ID: <1445216059-88521-24-git-send-email-guangrong.xiao@linux.intel.com> (raw)
In-Reply-To: <1445216059-88521-1-git-send-email-guangrong.xiao@linux.intel.com>

We reserve the memory region 0xFF00000 ~ 0xFFF00000 for NVDIMM ACPI
which is used as:
- the first page is mapped as MMIO, ACPI write data to this page to
  transfer the control to QEMU

- the second page is RAM-based which used to save the input info of
  _DSM method and QEMU reuse it store output info

- the left is mapped as RAM, it's the buffer returned by _FIT method,
  this is needed by NVDIMM hotplug

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
---
 hw/acpi/Makefile.objs   |   1 +
 hw/acpi/nvdimm.c        | 143 ++++++++++++++++++++++++++++++++++++++++++++++++
 hw/i386/pc.c            |   2 +
 include/hw/i386/pc.h    |   2 +
 include/hw/mem/nvdimm.h |  18 ++++++
 5 files changed, 166 insertions(+)
 create mode 100644 hw/acpi/nvdimm.c

diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
index 7d3230c..80426b4 100644
--- a/hw/acpi/Makefile.objs
+++ b/hw/acpi/Makefile.objs
@@ -2,6 +2,7 @@ common-obj-$(CONFIG_ACPI_X86) += core.o piix4.o pcihp.o
 common-obj-$(CONFIG_ACPI_X86_ICH) += ich9.o tco.o
 common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu_hotplug.o
 common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
+common-obj-$(CONFIG_NVDIMM) += nvdimm.o
 common-obj-$(CONFIG_ACPI) += acpi_interface.o
 common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
 common-obj-$(CONFIG_ACPI) += aml-build.o
diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c
new file mode 100644
index 0000000..fd70de2
--- /dev/null
+++ b/hw/acpi/nvdimm.c
@@ -0,0 +1,143 @@
+/*
+ * NVDIMM ACPI Implementation
+ *
+ * Copyright(C) 2015 Intel Corporation.
+ *
+ * Author:
+ *  Xiao Guangrong <guangrong.xiao@linux.intel.com>
+ *
+ * NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
+ * and the DSM specification can be found at:
+ *       http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
+ *
+ * Currently, it only supports PMEM Virtualization.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include "qemu-common.h"
+#include "hw/acpi/acpi.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/mem/nvdimm.h"
+
+/*
+ * System Physical Address Range Structure
+ *
+ * It describes the system physical address ranges occupied by NVDIMMs and
+ * the types of the regions.
+ */
+struct nfit_spa {
+    uint16_t type;
+    uint16_t length;
+    uint16_t spa_index;
+    uint16_t flags;
+    uint32_t reserved;
+    uint32_t proximity_domain;
+    uint8_t type_guid[16];
+    uint64_t spa_base;
+    uint64_t spa_length;
+    uint64_t mem_attr;
+} QEMU_PACKED;
+typedef struct nfit_spa nfit_spa;
+
+/*
+ * Memory Device to System Physical Address Range Mapping Structure
+ *
+ * It enables identifying each NVDIMM region and the corresponding SPA
+ * describing the memory interleave
+ */
+struct nfit_memdev {
+    uint16_t type;
+    uint16_t length;
+    uint32_t nfit_handle;
+    uint16_t phys_id;
+    uint16_t region_id;
+    uint16_t spa_index;
+    uint16_t dcr_index;
+    uint64_t region_len;
+    uint64_t region_offset;
+    uint64_t region_dpa;
+    uint16_t interleave_index;
+    uint16_t interleave_ways;
+    uint16_t flags;
+    uint16_t reserved;
+} QEMU_PACKED;
+typedef struct nfit_memdev nfit_memdev;
+
+/*
+ * NVDIMM Control Region Structure
+ *
+ * It describes the NVDIMM and if applicable, Block Control Window.
+ */
+struct nfit_dcr {
+    uint16_t type;
+    uint16_t length;
+    uint16_t dcr_index;
+    uint16_t vendor_id;
+    uint16_t device_id;
+    uint16_t revision_id;
+    uint16_t sub_vendor_id;
+    uint16_t sub_device_id;
+    uint16_t sub_revision_id;
+    uint8_t reserved[6];
+    uint32_t serial_number;
+    uint16_t fic;
+    uint16_t num_bcw;
+    uint64_t bcw_size;
+    uint64_t cmd_offset;
+    uint64_t cmd_size;
+    uint64_t status_offset;
+    uint64_t status_size;
+    uint16_t flags;
+    uint8_t reserved2[6];
+} QEMU_PACKED;
+typedef struct nfit_dcr nfit_dcr;
+
+/*
+ * calculate the size of structures which describe all NVDIMM devices.
+ * Currently each device has three structures as only PMEM is supported
+ * now.
+ */
+static uint64_t nvdimm_device_structure_size(uint64_t slots)
+{
+    return slots * (sizeof(nfit_spa) + sizeof(nfit_memdev) + sizeof(nfit_dcr));
+}
+
+/*
+ * calculate the size of the memory used to implement NVDIMM ACPI operations
+ * which include:
+ * - __DSM method: it needs two pages to transfer control and data between
+ *   Guest ACPI and QEMU.
+ *
+ * - _FIT method: it returns a buffer to Guest which contains the structures
+ *   describing all the present NVDIMM devices in the system.
+ */
+static uint64_t nvdimm_acpi_memory_size(uint64_t slots)
+{
+    uint64_t size = nvdimm_device_structure_size(slots);
+
+    return size + getpagesize() * 2;
+}
+
+void nvdimm_init_memory_state(NVDIMMState *state, MemoryRegion *system_memory,
+                              MachineState *machine)
+{
+    QEMU_BUILD_BUG_ON(nvdimm_acpi_memory_size(ACPI_MAX_RAM_SLOTS)
+                         >= NVDIMM_ACPI_MEM_SIZE);
+
+    state->base = NVDIMM_ACPI_MEM_BASE;
+    memory_region_init(&state->mr, OBJECT(machine), "nvdimm-acpi",
+                       NVDIMM_ACPI_MEM_SIZE);
+    memory_region_add_subregion(system_memory, state->base, &state->mr);
+}
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 6694b18..2207e09 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1360,6 +1360,8 @@ FWCfgState *pc_memory_init(PCMachineState *pcms,
             exit(EXIT_FAILURE);
         }
 
+        nvdimm_init_memory_state(&pcms->nvdimm_memory, system_memory, machine);
+
         pcms->hotplug_memory.base =
             ROUND_UP(0x100000000ULL + pcms->above_4g_mem_size, 1ULL << 30);
 
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index 693b6c5..fd65c27 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -17,6 +17,7 @@
 #include "hw/boards.h"
 #include "hw/compat.h"
 #include "hw/mem/dimm.h"
+#include "hw/mem/nvdimm.h"
 
 #define HPET_INTCAP "hpet-intcap"
 
@@ -32,6 +33,7 @@ struct PCMachineState {
 
     /* <public> */
     MemoryHotplugState hotplug_memory;
+    NVDIMMState nvdimm_memory;
 
     HotplugHandler *acpi_dev;
     ISADevice *rtc;
diff --git a/include/hw/mem/nvdimm.h b/include/hw/mem/nvdimm.h
index 60399d8..8e31983 100644
--- a/include/hw/mem/nvdimm.h
+++ b/include/hw/mem/nvdimm.h
@@ -33,6 +33,10 @@
  */
 #define MIN_NAMESPACE_LABEL_SIZE      (128UL << 10)
 
+/* Memory region 0xFF00000 ~ 0xFFF00000 is reserved for NVDIMM ACPI. */
+#define NVDIMM_ACPI_MEM_BASE          0xFF000000ULL
+#define NVDIMM_ACPI_MEM_SIZE          0xF00000ULL
+
 #define TYPE_NVDIMM      "nvdimm"
 #define NVDIMM(obj)      OBJECT_CHECK(NVDIMMDevice, (obj), TYPE_NVDIMM)
 
@@ -63,4 +67,18 @@ struct NVDIMMDevice {
 };
 typedef struct NVDIMMDevice NVDIMMDevice;
 
+/*
+ * NVDIMMState:
+ * @base: address in guest address space where NVDIMM ACPI memory begins.
+ * @mr: NVDIMM ACPI memory address space container.
+ */
+struct NVDIMMState {
+    ram_addr_t base;
+    MemoryRegion mr;
+};
+typedef struct NVDIMMState NVDIMMState;
+
+/* Initialize the memory region needed by NVDIMM ACPI.*/
+void nvdimm_init_memory_state(NVDIMMState *state, MemoryRegion *system_memory,
+                              MachineState *machine);
 #endif
-- 
1.8.3.1


WARNING: multiple messages have this Message-ID (diff)
From: Xiao Guangrong <guangrong.xiao@linux.intel.com>
To: pbonzini@redhat.com, imammedo@redhat.com
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>,
	ehabkost@redhat.com, kvm@vger.kernel.org, mst@redhat.com,
	gleb@kernel.org, mtosatti@redhat.com, qemu-devel@nongnu.org,
	stefanha@redhat.com, dan.j.williams@intel.com, rth@twiddle.net
Subject: [Qemu-devel] [PATCH v4 23/33] nvdimm acpi: init the address region used by NVDIMM ACPI
Date: Mon, 19 Oct 2015 08:54:09 +0800	[thread overview]
Message-ID: <1445216059-88521-24-git-send-email-guangrong.xiao@linux.intel.com> (raw)
In-Reply-To: <1445216059-88521-1-git-send-email-guangrong.xiao@linux.intel.com>

We reserve the memory region 0xFF00000 ~ 0xFFF00000 for NVDIMM ACPI
which is used as:
- the first page is mapped as MMIO, ACPI write data to this page to
  transfer the control to QEMU

- the second page is RAM-based which used to save the input info of
  _DSM method and QEMU reuse it store output info

- the left is mapped as RAM, it's the buffer returned by _FIT method,
  this is needed by NVDIMM hotplug

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
---
 hw/acpi/Makefile.objs   |   1 +
 hw/acpi/nvdimm.c        | 143 ++++++++++++++++++++++++++++++++++++++++++++++++
 hw/i386/pc.c            |   2 +
 include/hw/i386/pc.h    |   2 +
 include/hw/mem/nvdimm.h |  18 ++++++
 5 files changed, 166 insertions(+)
 create mode 100644 hw/acpi/nvdimm.c

diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
index 7d3230c..80426b4 100644
--- a/hw/acpi/Makefile.objs
+++ b/hw/acpi/Makefile.objs
@@ -2,6 +2,7 @@ common-obj-$(CONFIG_ACPI_X86) += core.o piix4.o pcihp.o
 common-obj-$(CONFIG_ACPI_X86_ICH) += ich9.o tco.o
 common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu_hotplug.o
 common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
+common-obj-$(CONFIG_NVDIMM) += nvdimm.o
 common-obj-$(CONFIG_ACPI) += acpi_interface.o
 common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
 common-obj-$(CONFIG_ACPI) += aml-build.o
diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c
new file mode 100644
index 0000000..fd70de2
--- /dev/null
+++ b/hw/acpi/nvdimm.c
@@ -0,0 +1,143 @@
+/*
+ * NVDIMM ACPI Implementation
+ *
+ * Copyright(C) 2015 Intel Corporation.
+ *
+ * Author:
+ *  Xiao Guangrong <guangrong.xiao@linux.intel.com>
+ *
+ * NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
+ * and the DSM specification can be found at:
+ *       http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
+ *
+ * Currently, it only supports PMEM Virtualization.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include "qemu-common.h"
+#include "hw/acpi/acpi.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/mem/nvdimm.h"
+
+/*
+ * System Physical Address Range Structure
+ *
+ * It describes the system physical address ranges occupied by NVDIMMs and
+ * the types of the regions.
+ */
+struct nfit_spa {
+    uint16_t type;
+    uint16_t length;
+    uint16_t spa_index;
+    uint16_t flags;
+    uint32_t reserved;
+    uint32_t proximity_domain;
+    uint8_t type_guid[16];
+    uint64_t spa_base;
+    uint64_t spa_length;
+    uint64_t mem_attr;
+} QEMU_PACKED;
+typedef struct nfit_spa nfit_spa;
+
+/*
+ * Memory Device to System Physical Address Range Mapping Structure
+ *
+ * It enables identifying each NVDIMM region and the corresponding SPA
+ * describing the memory interleave
+ */
+struct nfit_memdev {
+    uint16_t type;
+    uint16_t length;
+    uint32_t nfit_handle;
+    uint16_t phys_id;
+    uint16_t region_id;
+    uint16_t spa_index;
+    uint16_t dcr_index;
+    uint64_t region_len;
+    uint64_t region_offset;
+    uint64_t region_dpa;
+    uint16_t interleave_index;
+    uint16_t interleave_ways;
+    uint16_t flags;
+    uint16_t reserved;
+} QEMU_PACKED;
+typedef struct nfit_memdev nfit_memdev;
+
+/*
+ * NVDIMM Control Region Structure
+ *
+ * It describes the NVDIMM and if applicable, Block Control Window.
+ */
+struct nfit_dcr {
+    uint16_t type;
+    uint16_t length;
+    uint16_t dcr_index;
+    uint16_t vendor_id;
+    uint16_t device_id;
+    uint16_t revision_id;
+    uint16_t sub_vendor_id;
+    uint16_t sub_device_id;
+    uint16_t sub_revision_id;
+    uint8_t reserved[6];
+    uint32_t serial_number;
+    uint16_t fic;
+    uint16_t num_bcw;
+    uint64_t bcw_size;
+    uint64_t cmd_offset;
+    uint64_t cmd_size;
+    uint64_t status_offset;
+    uint64_t status_size;
+    uint16_t flags;
+    uint8_t reserved2[6];
+} QEMU_PACKED;
+typedef struct nfit_dcr nfit_dcr;
+
+/*
+ * calculate the size of structures which describe all NVDIMM devices.
+ * Currently each device has three structures as only PMEM is supported
+ * now.
+ */
+static uint64_t nvdimm_device_structure_size(uint64_t slots)
+{
+    return slots * (sizeof(nfit_spa) + sizeof(nfit_memdev) + sizeof(nfit_dcr));
+}
+
+/*
+ * calculate the size of the memory used to implement NVDIMM ACPI operations
+ * which include:
+ * - __DSM method: it needs two pages to transfer control and data between
+ *   Guest ACPI and QEMU.
+ *
+ * - _FIT method: it returns a buffer to Guest which contains the structures
+ *   describing all the present NVDIMM devices in the system.
+ */
+static uint64_t nvdimm_acpi_memory_size(uint64_t slots)
+{
+    uint64_t size = nvdimm_device_structure_size(slots);
+
+    return size + getpagesize() * 2;
+}
+
+void nvdimm_init_memory_state(NVDIMMState *state, MemoryRegion *system_memory,
+                              MachineState *machine)
+{
+    QEMU_BUILD_BUG_ON(nvdimm_acpi_memory_size(ACPI_MAX_RAM_SLOTS)
+                         >= NVDIMM_ACPI_MEM_SIZE);
+
+    state->base = NVDIMM_ACPI_MEM_BASE;
+    memory_region_init(&state->mr, OBJECT(machine), "nvdimm-acpi",
+                       NVDIMM_ACPI_MEM_SIZE);
+    memory_region_add_subregion(system_memory, state->base, &state->mr);
+}
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 6694b18..2207e09 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1360,6 +1360,8 @@ FWCfgState *pc_memory_init(PCMachineState *pcms,
             exit(EXIT_FAILURE);
         }
 
+        nvdimm_init_memory_state(&pcms->nvdimm_memory, system_memory, machine);
+
         pcms->hotplug_memory.base =
             ROUND_UP(0x100000000ULL + pcms->above_4g_mem_size, 1ULL << 30);
 
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index 693b6c5..fd65c27 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -17,6 +17,7 @@
 #include "hw/boards.h"
 #include "hw/compat.h"
 #include "hw/mem/dimm.h"
+#include "hw/mem/nvdimm.h"
 
 #define HPET_INTCAP "hpet-intcap"
 
@@ -32,6 +33,7 @@ struct PCMachineState {
 
     /* <public> */
     MemoryHotplugState hotplug_memory;
+    NVDIMMState nvdimm_memory;
 
     HotplugHandler *acpi_dev;
     ISADevice *rtc;
diff --git a/include/hw/mem/nvdimm.h b/include/hw/mem/nvdimm.h
index 60399d8..8e31983 100644
--- a/include/hw/mem/nvdimm.h
+++ b/include/hw/mem/nvdimm.h
@@ -33,6 +33,10 @@
  */
 #define MIN_NAMESPACE_LABEL_SIZE      (128UL << 10)
 
+/* Memory region 0xFF00000 ~ 0xFFF00000 is reserved for NVDIMM ACPI. */
+#define NVDIMM_ACPI_MEM_BASE          0xFF000000ULL
+#define NVDIMM_ACPI_MEM_SIZE          0xF00000ULL
+
 #define TYPE_NVDIMM      "nvdimm"
 #define NVDIMM(obj)      OBJECT_CHECK(NVDIMMDevice, (obj), TYPE_NVDIMM)
 
@@ -63,4 +67,18 @@ struct NVDIMMDevice {
 };
 typedef struct NVDIMMDevice NVDIMMDevice;
 
+/*
+ * NVDIMMState:
+ * @base: address in guest address space where NVDIMM ACPI memory begins.
+ * @mr: NVDIMM ACPI memory address space container.
+ */
+struct NVDIMMState {
+    ram_addr_t base;
+    MemoryRegion mr;
+};
+typedef struct NVDIMMState NVDIMMState;
+
+/* Initialize the memory region needed by NVDIMM ACPI.*/
+void nvdimm_init_memory_state(NVDIMMState *state, MemoryRegion *system_memory,
+                              MachineState *machine);
 #endif
-- 
1.8.3.1

  parent reply	other threads:[~2015-10-18 17:00 UTC|newest]

Thread overview: 112+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-19  0:53 [PATCH v4 00/33] implement vNVDIMM Xiao Guangrong
2015-10-19  0:53 ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 01/33] acpi: add aml_derefof Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 02/33] acpi: add aml_sizeof Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 03/33] acpi: add aml_create_field Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 04/33] acpi: add aml_concatenate Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 05/33] acpi: add aml_object_type Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 06/33] acpi: add aml_method_serialized Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 07/33] util: introduce qemu_file_get_page_size() Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 08/33] exec: allow memory to be allocated from any kind of path Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 09/33] exec: allow file_ram_alloc to work on file Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 10/33] hostmem-file: clean up memory allocation Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 11/33] hostmem-file: use whole file size if possible Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 12/33] pc-dimm: remove DEFAULT_PC_DIMMSIZE Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:53 ` [PATCH v4 13/33] pc-dimm: make pc_existing_dimms_capacity static and rename it Xiao Guangrong
2015-10-19  0:53   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 14/33] pc-dimm: drop the prefix of pc-dimm Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 15/33] stubs: rename qmp_pc_dimm_device_list.c Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 16/33] pc-dimm: rename pc-dimm.c and pc-dimm.h Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 17/33] dimm: abstract dimm device from pc-dimm Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-24  3:20   ` Bharata B Rao
2015-10-24  3:20     ` [Qemu-devel] " Bharata B Rao
2015-10-28 14:31     ` Xiao Guangrong
2015-10-28 14:31       ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 18/33] dimm: get mapped memory region from DIMMDeviceClass->get_memory_region Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 19/33] dimm: keep the state of the whole backend memory Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 20/33] dimm: introduce realize callback Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 21/33] nvdimm: implement NVDIMM device abstract Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 22/33] docs: add NVDIMM ACPI documentation Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` Xiao Guangrong [this message]
2015-10-19  0:54   ` [Qemu-devel] [PATCH v4 23/33] nvdimm acpi: init the address region used by NVDIMM ACPI Xiao Guangrong
2015-10-18 17:15   ` Michael S. Tsirkin
2015-10-18 17:15     ` [Qemu-devel] " Michael S. Tsirkin
2015-10-19  3:58     ` Xiao Guangrong
2015-10-19  3:58       ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 24/33] nvdimm acpi: build ACPI NFIT table Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 25/33] nvdimm acpi: init the address region used by DSM Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 26/33] nvdimm acpi: build ACPI nvdimm devices Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 27/33] nvdimm acpi: save arg3 for NVDIMM device _DSM method Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-18 17:16   ` Michael S. Tsirkin
2015-10-18 17:16     ` [Qemu-devel] " Michael S. Tsirkin
2015-10-19  4:04     ` Xiao Guangrong
2015-10-19  4:04       ` [Qemu-devel] " Xiao Guangrong
2015-10-19  6:57       ` Michael S. Tsirkin
2015-10-19  6:57         ` [Qemu-devel] " Michael S. Tsirkin
2015-10-19  7:09       ` Michael S. Tsirkin
2015-10-19  7:09         ` [Qemu-devel] " Michael S. Tsirkin
2015-10-19 17:29         ` Dan Williams
2015-10-19 17:29           ` [Qemu-devel] " Dan Williams
2015-10-19 21:19           ` Michael S. Tsirkin
2015-10-19 21:19             ` [Qemu-devel] " Michael S. Tsirkin
2015-10-19 21:29             ` Dan Williams
2015-10-19 21:29               ` [Qemu-devel] " Dan Williams
2015-10-19  0:54 ` [PATCH v4 28/33] nvdimm acpi: support DSM_FUN_IMPLEMENTED function Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-18 18:05   ` Michael S. Tsirkin
2015-10-18 18:05     ` [Qemu-devel] " Michael S. Tsirkin
2015-10-19  4:39     ` Xiao Guangrong
2015-10-19  4:39       ` [Qemu-devel] " Xiao Guangrong
2015-10-19  7:06       ` Michael S. Tsirkin
2015-10-19  7:06         ` [Qemu-devel] " Michael S. Tsirkin
2015-10-19  7:39         ` Xiao Guangrong
2015-10-19  7:39           ` [Qemu-devel] " Xiao Guangrong
2015-10-20 15:51   ` Stefan Hajnoczi
2015-10-20 15:51     ` [Qemu-devel] " Stefan Hajnoczi
2015-10-20 16:05     ` Michael S. Tsirkin
2015-10-20 16:05       ` [Qemu-devel] " Michael S. Tsirkin
2015-10-20 16:26     ` Xiao Guangrong
2015-10-20 16:26       ` [Qemu-devel] " Xiao Guangrong
2015-10-20 16:29       ` Xiao Guangrong
2015-10-20 16:29         ` [Qemu-devel] " Xiao Guangrong
2015-10-21 10:49       ` Stefan Hajnoczi
2015-10-21 10:49         ` [Qemu-devel] " Stefan Hajnoczi
2015-10-21 13:32         ` Xiao Guangrong
2015-10-21 13:32           ` [Qemu-devel] " Xiao Guangrong
2015-10-29 14:36           ` Igor Mammedov
2015-10-29 14:36             ` [Qemu-devel] " Igor Mammedov
2015-10-19  0:54 ` [PATCH v4 29/33] nvdimm acpi: support DSM_DEV_FUN_NAMESPACE_LABEL_SIZE function Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 30/33] nvdimm acpi: support DSM_DEV_FUN_GET_NAMESPACE_LABEL_DATA Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 31/33] nvdimm acpi: support DSM_DEV_FUN_SET_NAMESPACE_LABEL_DATA Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 32/33] nvdimm: allow using whole backend memory as pmem Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong
2015-10-19  0:54 ` [PATCH v4 33/33] nvdimm: add maintain info Xiao Guangrong
2015-10-19  0:54   ` [Qemu-devel] " Xiao Guangrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445216059-88521-24-git-send-email-guangrong.xiao@linux.intel.com \
    --to=guangrong.xiao@linux.intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=ehabkost@redhat.com \
    --cc=gleb@kernel.org \
    --cc=imammedo@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=mtosatti@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.