From: Chen-Yu Tsai <wens@csie.org>
To: Lee Jones <lee.jones@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH 10/11] ARM: dts: sun9i: a80-optimus: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0
Date: Tue, 2 Feb 2016 18:27:43 +0800 [thread overview]
Message-ID: <1454408864-24112-11-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1454408864-24112-1-git-send-email-wens@csie.org>
These 3 regulators are provided in sunxi-common-regulators.dtsi.
3.0V/3.3V and 5.0V are commonly used voltages in Allwinner devices.
These dummy regulators provide a stand-in when bindings that require
one, but the real regulator is not supported yet.
Since these are no longer needed, we can disable them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80-optimus.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 7f6bf6138966..b447360d93e8 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -323,6 +323,18 @@
regulator-name = "vcc-rtc-vdd1v8-io";
};
+®_vcc3v0 {
+ status = "disabled";
+};
+
+®_vcc3v3 {
+ status = "disabled";
+};
+
+®_vcc5v0 {
+ status = "disabled";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH 10/11] ARM: dts: sun9i: a80-optimus: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0
Date: Tue, 2 Feb 2016 18:27:43 +0800 [thread overview]
Message-ID: <1454408864-24112-11-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1454408864-24112-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
These 3 regulators are provided in sunxi-common-regulators.dtsi.
3.0V/3.3V and 5.0V are commonly used voltages in Allwinner devices.
These dummy regulators provide a stand-in when bindings that require
one, but the real regulator is not supported yet.
Since these are no longer needed, we can disable them.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sun9i-a80-optimus.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 7f6bf6138966..b447360d93e8 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -323,6 +323,18 @@
regulator-name = "vcc-rtc-vdd1v8-io";
};
+®_vcc3v0 {
+ status = "disabled";
+};
+
+®_vcc3v3 {
+ status = "disabled";
+};
+
+®_vcc5v0 {
+ status = "disabled";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/11] ARM: dts: sun9i: a80-optimus: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0
Date: Tue, 2 Feb 2016 18:27:43 +0800 [thread overview]
Message-ID: <1454408864-24112-11-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1454408864-24112-1-git-send-email-wens@csie.org>
These 3 regulators are provided in sunxi-common-regulators.dtsi.
3.0V/3.3V and 5.0V are commonly used voltages in Allwinner devices.
These dummy regulators provide a stand-in when bindings that require
one, but the real regulator is not supported yet.
Since these are no longer needed, we can disable them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80-optimus.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 7f6bf6138966..b447360d93e8 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -323,6 +323,18 @@
regulator-name = "vcc-rtc-vdd1v8-io";
};
+®_vcc3v0 {
+ status = "disabled";
+};
+
+®_vcc3v3 {
+ status = "disabled";
+};
+
+®_vcc5v0 {
+ status = "disabled";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.7.0
next prev parent reply other threads:[~2016-02-02 10:30 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-02 10:27 [PATCH 00/11] mfd: axp20x: Add support for AXP809 PMIC Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` [PATCH 01/11] MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 13:27 ` Maxime Ripard
2016-02-02 13:27 ` Maxime Ripard
2016-02-02 13:27 ` Maxime Ripard
2016-02-03 0:19 ` [linux-sunxi] " Julian Calaby
2016-02-03 0:19 ` Julian Calaby
2016-02-03 0:19 ` Julian Calaby
2016-02-03 1:28 ` [linux-sunxi] " Joe Perches
2016-02-03 1:28 ` Joe Perches
2016-02-03 1:28 ` Joe Perches
2016-02-03 1:30 ` [linux-sunxi] " Julian Calaby
2016-02-03 1:30 ` Julian Calaby
2016-02-03 1:30 ` Julian Calaby
2016-02-03 6:49 ` Chen-Yu Tsai
2016-02-03 6:49 ` Chen-Yu Tsai
2016-02-03 6:49 ` Chen-Yu Tsai
2016-02-02 10:27 ` [PATCH 02/11] mfd: axp20x: Add bindings for AXP809 PMIC Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 22:43 ` Rob Herring
2016-02-02 22:43 ` Rob Herring
2016-02-02 22:43 ` Rob Herring
2016-02-09 10:18 ` Lee Jones
2016-02-09 10:18 ` Lee Jones
2016-02-09 10:18 ` Lee Jones
2016-02-02 10:27 ` [PATCH 03/11] mfd: axp20x: Add support " Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` [PATCH 04/11] regulator: axp20x: Remove voltage readout support for switch regulators Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-03 18:11 ` Applied "regulator: axp20x: Remove voltage readout support for switch regulators" to the regulator tree Mark Brown
2016-02-02 10:27 ` [PATCH 05/11] regulator: axp20x: Use linear voltage ranges for AXP20X LDO4 Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-03 18:11 ` Applied "regulator: axp20x: Use linear voltage ranges for AXP20X LDO4" to the regulator tree Mark Brown
2016-02-02 10:27 ` [PATCH 06/11] regulator: axp20x: support AXP809 variant Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-03 17:15 ` Mark Brown
2016-02-03 17:15 ` Mark Brown
2016-02-03 17:15 ` Mark Brown
2016-05-31 17:46 ` Applied "regulator: axp20x: support AXP809 variant" to the regulator tree Mark Brown
2016-05-31 17:46 ` Mark Brown
2016-05-31 17:46 ` Mark Brown
2016-02-02 10:27 ` [PATCH 07/11] ARM: dts: sunxi: Add dtsi file for AXP809 PMIC Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 12:17 ` Mark Brown
2016-02-02 12:17 ` Mark Brown
2016-02-02 12:17 ` Mark Brown
2016-02-06 12:42 ` Chen-Yu Tsai
2016-02-06 12:42 ` Chen-Yu Tsai
2016-02-06 12:42 ` Chen-Yu Tsai
2016-02-08 14:53 ` Mark Brown
2016-02-08 14:53 ` Mark Brown
2016-02-08 14:53 ` Mark Brown
2016-02-08 14:56 ` Chen-Yu Tsai
2016-02-08 14:56 ` Chen-Yu Tsai
2016-02-08 14:56 ` Chen-Yu Tsai
2016-02-08 16:22 ` Mark Brown
2016-02-08 16:22 ` Mark Brown
2016-02-08 16:22 ` Mark Brown
2016-02-09 5:41 ` Chen-Yu Tsai
2016-02-09 5:41 ` Chen-Yu Tsai
2016-02-09 5:41 ` Chen-Yu Tsai
2016-02-09 11:32 ` Mark Brown
2016-02-09 11:32 ` Mark Brown
2016-02-09 11:32 ` Mark Brown
2016-02-02 10:27 ` [PATCH 08/11] ARM: dts: sun9i: a80-optimus: Add AXP809 PMIC device node and regulators Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` [PATCH 09/11] ARM: dts: sun9i: cubieboard4: " Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai [this message]
2016-02-02 10:27 ` [PATCH 10/11] ARM: dts: sun9i: a80-optimus: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0 Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 16:21 ` Maxime Ripard
2016-02-02 16:21 ` Maxime Ripard
2016-02-02 16:21 ` Maxime Ripard
2016-02-02 16:41 ` Chen-Yu Tsai
2016-02-02 16:41 ` Chen-Yu Tsai
2016-02-02 16:41 ` Chen-Yu Tsai
2016-02-04 16:44 ` Maxime Ripard
2016-02-04 16:44 ` Maxime Ripard
2016-02-04 16:44 ` Maxime Ripard
2016-02-02 10:27 ` [PATCH 11/11] ARM: dts: sun9i: cubieboard4: " Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
2016-02-02 10:27 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454408864-24112-11-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.