[PATCH 03/11] mfd: axp20x: Add support for AXP809 PMIC - Chen-Yu Tsai

From: Chen-Yu Tsai <wens@csie.org>
To: Lee Jones <lee.jones@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH 03/11] mfd: axp20x: Add support for AXP809 PMIC
Date: Tue,  2 Feb 2016 18:27:36 +0800	[thread overview]
Message-ID: <1454408864-24112-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1454408864-24112-1-git-send-email-wens@csie.org>

The X-Powers AXP809 is a new PMIC that is paired with Allwinner's A80
SoC, along with a slave AXP806 PMIC.

This PMIC is quite similar to the earlier AXP223, though the interrupts
and regulator have changed a bit.

This patch adds support for the interrupts and power button of the PMIC.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/mfd/axp20x-rsb.c   |  1 +
 drivers/mfd/axp20x.c       | 79 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/axp20x.h | 59 ++++++++++++++++++++++++++++++++++
 3 files changed, 139 insertions(+)

diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
index 28c20247c112..a407527bcd09 100644
--- a/drivers/mfd/axp20x-rsb.c
+++ b/drivers/mfd/axp20x-rsb.c
@@ -61,6 +61,7 @@ static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev)
 
 static const struct of_device_id axp20x_rsb_of_match[] = {
 	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
+	{ .compatible = "x-powers,axp809", .data = (void *)AXP809_ID },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index a57d6e940610..1ce923277cc8 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -37,6 +37,7 @@ static const char * const axp20x_model_names[] = {
 	"AXP221",
 	"AXP223",
 	"AXP288",
+	"AXP809",
 };
 
 static const struct regmap_range axp152_writeable_ranges[] = {
@@ -85,6 +86,7 @@ static const struct regmap_access_table axp20x_volatile_table = {
 	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
 };
 
+/* AXP22x ranges are shared with the AXP809, as they cover the same range */
 static const struct regmap_range axp22x_writeable_ranges[] = {
 	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
 	regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
@@ -211,6 +213,20 @@ static struct resource axp288_fuel_gauge_resources[] = {
 	},
 };
 
+static struct resource axp809_pek_resources[] = {
+	{
+		.name   = "PEK_DBR",
+		.start  = AXP809_IRQ_PEK_RIS_EDGE,
+		.end    = AXP809_IRQ_PEK_RIS_EDGE,
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.name   = "PEK_DBF",
+		.start  = AXP809_IRQ_PEK_FAL_EDGE,
+		.end    = AXP809_IRQ_PEK_FAL_EDGE,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
 static const struct regmap_config axp152_regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -378,6 +394,41 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
 	INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG,            5, 1),
 };
 
+static const struct regmap_irq axp809_regmap_irqs[] = {
+	INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V,		0, 7),
+	INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN,		0, 6),
+	INIT_REGMAP_IRQ(AXP809, ACIN_REMOVAL,	        0, 5),
+	INIT_REGMAP_IRQ(AXP809, VBUS_OVER_V,		0, 4),
+	INIT_REGMAP_IRQ(AXP809, VBUS_PLUGIN,		0, 3),
+	INIT_REGMAP_IRQ(AXP809, VBUS_REMOVAL,	        0, 2),
+	INIT_REGMAP_IRQ(AXP809, VBUS_V_LOW,		0, 1),
+	INIT_REGMAP_IRQ(AXP809, BATT_PLUGIN,		1, 7),
+	INIT_REGMAP_IRQ(AXP809, BATT_REMOVAL,	        1, 6),
+	INIT_REGMAP_IRQ(AXP809, BATT_ENT_ACT_MODE,	1, 5),
+	INIT_REGMAP_IRQ(AXP809, BATT_EXIT_ACT_MODE,	1, 4),
+	INIT_REGMAP_IRQ(AXP809, CHARG,		        1, 3),
+	INIT_REGMAP_IRQ(AXP809, CHARG_DONE,		1, 2),
+	INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH,	2, 7),
+	INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH_END,	2, 6),
+	INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW,	2, 5),
+	INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW_END,	2, 4),
+	INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH,	2, 3),
+	INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH_END,	2, 2),
+	INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW,	2, 1),
+	INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW_END,	2, 0),
+	INIT_REGMAP_IRQ(AXP809, DIE_TEMP_HIGH,	        3, 7),
+	INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL1,	        3, 1),
+	INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL2,	        3, 0),
+	INIT_REGMAP_IRQ(AXP809, TIMER,		        4, 7),
+	INIT_REGMAP_IRQ(AXP809, PEK_RIS_EDGE,	        4, 6),
+	INIT_REGMAP_IRQ(AXP809, PEK_FAL_EDGE,	        4, 5),
+	INIT_REGMAP_IRQ(AXP809, PEK_SHORT,		4, 4),
+	INIT_REGMAP_IRQ(AXP809, PEK_LONG,		4, 3),
+	INIT_REGMAP_IRQ(AXP809, PEK_OVER_OFF,		4, 2),
+	INIT_REGMAP_IRQ(AXP809, GPIO1_INPUT,		4, 1),
+	INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT,		4, 0),
+};
+
 static const struct regmap_irq_chip axp152_regmap_irq_chip = {
 	.name			= "axp152_irq_chip",
 	.status_base		= AXP152_IRQ1_STATE,
@@ -428,6 +479,18 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
 
 };
 
+static const struct regmap_irq_chip axp809_regmap_irq_chip = {
+	.name			= "axp809",
+	.status_base		= AXP20X_IRQ1_STATE,
+	.ack_base		= AXP20X_IRQ1_STATE,
+	.mask_base		= AXP20X_IRQ1_EN,
+	.mask_invert		= true,
+	.init_ack_masked	= true,
+	.irqs			= axp809_regmap_irqs,
+	.num_irqs		= ARRAY_SIZE(axp809_regmap_irqs),
+	.num_regs		= 5,
+};
+
 static struct mfd_cell axp20x_cells[] = {
 	{
 		.name		= "axp20x-pek",
@@ -572,6 +635,16 @@ static struct mfd_cell axp288_cells[] = {
 	},
 };
 
+static struct mfd_cell axp809_cells[] = {
+	{
+		.name			= "axp20x-pek",
+		.num_resources		= ARRAY_SIZE(axp809_pek_resources),
+		.resources		= axp809_pek_resources,
+	}, {
+		.name			= "axp20x-regulator",
+	},
+};
+
 static struct axp20x_dev *axp20x_pm_power_off;
 static void axp20x_power_off(void)
 {
@@ -631,6 +704,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
 		axp20x->regmap_cfg = &axp288_regmap_config;
 		axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
 		break;
+	case AXP809_ID:
+		axp20x->nr_cells = ARRAY_SIZE(axp809_cells);
+		axp20x->cells = axp809_cells;
+		axp20x->regmap_cfg = &axp22x_regmap_config;
+		axp20x->regmap_irq_chip = &axp809_regmap_irq_chip;
+		break;
 	default:
 		dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
 		return -EINVAL;
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index d82e7d51372b..0be4982f08fe 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -20,6 +20,7 @@ enum {
 	AXP221_ID,
 	AXP223_ID,
 	AXP288_ID,
+	AXP809_ID,
 	NR_AXP20X_VARIANTS,
 };
 
@@ -264,6 +265,29 @@ enum {
 	AXP22X_REG_ID_MAX,
 };
 
+enum {
+	AXP809_DCDC1 = 0,
+	AXP809_DCDC2,
+	AXP809_DCDC3,
+	AXP809_DCDC4,
+	AXP809_DCDC5,
+	AXP809_DC1SW,
+	AXP809_DC5LDO,
+	AXP809_ALDO1,
+	AXP809_ALDO2,
+	AXP809_ALDO3,
+	AXP809_ELDO1,
+	AXP809_ELDO2,
+	AXP809_ELDO3,
+	AXP809_DLDO1,
+	AXP809_DLDO2,
+	AXP809_RTC_LDO,
+	AXP809_LDO_IO0,
+	AXP809_LDO_IO1,
+	AXP809_SW,
+	AXP809_REG_ID_MAX,
+};
+
 /* IRQs */
 enum {
 	AXP152_IRQ_LDO0IN_CONNECT = 1,
@@ -390,6 +414,41 @@ enum axp288_irqs {
 	AXP288_IRQ_BC_USB_CHNG,
 };
 
+enum axp809_irqs {
+	AXP809_IRQ_ACIN_OVER_V = 1,
+	AXP809_IRQ_ACIN_PLUGIN,
+	AXP809_IRQ_ACIN_REMOVAL,
+	AXP809_IRQ_VBUS_OVER_V,
+	AXP809_IRQ_VBUS_PLUGIN,
+	AXP809_IRQ_VBUS_REMOVAL,
+	AXP809_IRQ_VBUS_V_LOW,
+	AXP809_IRQ_BATT_PLUGIN,
+	AXP809_IRQ_BATT_REMOVAL,
+	AXP809_IRQ_BATT_ENT_ACT_MODE,
+	AXP809_IRQ_BATT_EXIT_ACT_MODE,
+	AXP809_IRQ_CHARG,
+	AXP809_IRQ_CHARG_DONE,
+	AXP809_IRQ_BATT_CHG_TEMP_HIGH,
+	AXP809_IRQ_BATT_CHG_TEMP_HIGH_END,
+	AXP809_IRQ_BATT_CHG_TEMP_LOW,
+	AXP809_IRQ_BATT_CHG_TEMP_LOW_END,
+	AXP809_IRQ_BATT_ACT_TEMP_HIGH,
+	AXP809_IRQ_BATT_ACT_TEMP_HIGH_END,
+	AXP809_IRQ_BATT_ACT_TEMP_LOW,
+	AXP809_IRQ_BATT_ACT_TEMP_LOW_END,
+	AXP809_IRQ_DIE_TEMP_HIGH,
+	AXP809_IRQ_LOW_PWR_LVL1,
+	AXP809_IRQ_LOW_PWR_LVL2,
+	AXP809_IRQ_TIMER,
+	AXP809_IRQ_PEK_RIS_EDGE,
+	AXP809_IRQ_PEK_FAL_EDGE,
+	AXP809_IRQ_PEK_SHORT,
+	AXP809_IRQ_PEK_LONG,
+	AXP809_IRQ_PEK_OVER_OFF,
+	AXP809_IRQ_GPIO1_INPUT,
+	AXP809_IRQ_GPIO0_INPUT,
+};
+
 #define AXP288_TS_ADC_H		0x58
 #define AXP288_TS_ADC_L		0x59
 #define AXP288_GP_ADC_H		0x5a
-- 
2.7.0
